Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. H. Rivetta, J. D. Fox, O. Turgut, W. H?Âfle, and K. S. B. Li, “Modeling and Feedback Design Techniques for Controlling Intra-bunch Instabilities at CERN SPS Ring”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO3AB04, pp. 399-403.
[n] A. Goto, “Review of High Power Cyclotrons for Heavy Ion Beams”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOM2CIO01, pp. 9-15.
[n] F. Zhu, K. X. Liu, S. W. Quan, F. Wang, and H. T. X. Zhong, “Beam Energy Loss in a =0.09 SRF HWR Cavity for 100 mA Proton Acceleration”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 567-570. doi:10.18429/JACoW-HB2016-THPM8Y01
[n] H. Yang, “Measurement of Diagnostics Response by RF Parameters for Hard X-ray Line in PAL-XFEL”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 531-533. doi:10.18429/JACoW-LINAC2018-TUPO088
[n] E. Echeverria, A. Flint, C. Pennington, M. Andorf, J. Maxson, and A. Galdi, “First Steps Toward Molecular beam epitaxial growth of potassium antimonide photocathodes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2068-2071. doi:10.18429/JACoW-IPAC2024-WEPC47
[n] V. D. Shemelin and V. P. Yakovlev, “Equidistant Optimization of Elliptical SRF Standing Wave Cavities”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 480-484. doi:10.18429/JACoW-SRF2023-TUPTB036
[n] F. Zimmermann et al., “Damping Bunch Oscillations Due to Off-Axis Injection”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2422-2425. doi:10.18429/JACoW-IPAC2019-WEPMP041
[n] J.-P. G. Tock et al., “The Special LHC Interconnections: Technologies, Organization and Quality Control”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD026, pp. 2464-2466.
[n] F. Pan, “Investigation of Nucleation Stage in Diffusion Coating of Nb3Sn on Nb”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 873-876. doi:10.18429/JACoW-SRF2017-THPB057
[n] C. Roux et al., “Superconducting magnets for SIS100 and Super-FRS at FAIR – overview and progress”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2862-2865. doi:10.18429/JACoW-IPAC2024-WEPS71
[n] S. Kurokawa, “The Present Status of the KEKB Project”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP086G, pp. 448-450.
[n] Katoh T., Akiyama A., Kudo K., Nakamura T.T., Odagiri J.-I., Yamamoto N., “The Operators' Consoles for KEKB Accelerators”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper WC1P30, pp. XX-XX.
[n] L. Smith, “Stepped Phase Velocity Linacs”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper C-02, pp. 224-234.
[n] P. Sha and J. Y. Zhai, “New Cavity Techniques and Future Prospects”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 173-176. doi:10.18429/JACoW-eeFACT2016-WET2H4
[n] W. Br?ñutigam, O. Felden, R. Maier, S. Martin, R. Stassen, and E. Zaplatin, “Superconducting RF Cavity Development for ESS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3B18, pp. 2058-2062.
[n] S. I. Sosa Guitron, S. Biedron, T. B. Bolin, K. A. Brown, and B. Huang, “Electromagnetic Analysis of a Circular Storage Ring for Quantum Computing Using Vsim”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2034-2035. doi:10.18429/JACoW-IPAC2022-WEPOTK005
[n] J. Norem et al., “An $e^+ e^-$ Top Factory in a 50+50 TeV Hadron Collider Tunnel”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8W001, pp. 363-365.
[n] C. J. Liaw et al., “Cathode Puck Insertion System Design for the LEReC Photoemission DC Electron Gun”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1021-1023. doi:10.18429/JACoW-NAPAC2016-WEPOB58
[n] T. Tanabe et al., “Electron Cooling Device for TARN II”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2412-2415.
[n] B. van der Horst, M. Helmig, A. Matheisen, S. Saegebarth, and M. Schalwat, “Series Production of BQU at DESY for the EU-XFEL Module Assembly at CEA Saclay”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB104, pp. 865-868.
[n] A. Yamamoto et al., “Fabrication of an X-band 30 cm Accelerating Structure by Diffusion Brazing”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2182-2185.
[n] D. Fanelli, A. Antoniazzi, R. Bachelard, C. Chandre, X. Leoncini, and M. Vittot, “Control of the Intensity of a Wave Interacting with Charged Particles”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH022, pp. 83-86.
[n] J. I. M. Botman and C. A. Thomas, “Simulations on Harmonic Generation with the Particle Tracking Code GPT”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH123, pp. 2763-2765.
[n] A. A. Fateev, E. V. Gorbachev, H. P. Nazlev, and V. A. Bulanov, “The Pulsed High Voltage Power Supply for the NICA Booster Injection System”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 592-593. doi:10.18429/JACoW-RUPAC2016-THPSC024
[n] L. G. Sukhikh et al., “Focusing of Optical Transition and Diffraction Radiation by a Spherical Target”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB13, pp. 259-261.
[n] E. A. Nissen, A. K?ñllberg, and A. Simonsson, “Further Measurements of Beam-Beam Interactions in a Gear-Changing System in DESIREE”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1810-1812. doi:10.18429/JACoW-IPAC2022-WEPOST050
[n] B. Mustapha, P. N. Ostroumov, M. A. Fraser, and A. Perry, “Simultaneous Acceleration of Radioactive and Stable Beams in the ATLAS Linac”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO1AB01, pp. 334-339.
[n] L. W. Lai et al., “The Development and Applications of the Digital BPM Signal Processor at SINAP”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 43-45. doi:10.18429/JACoW-FLS2018-TUP1WD03
[n] M. N. Nguyen, C. Burkhart, K. J. P. Macken, and J. J. Olsen, “Compact, Intelligent, Digitally Controlled IGBT Gate Drivers for a PEBB-based ILC Marx Modulator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD100, pp. 3335-3337.
[n] M. P. Sangroula et al., “Design Update on the HSR Injection Kicker for the EIC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1904-1907. doi:10.18429/JACoW-IPAC2022-WEPOPT028
[n] A. Kiyomichi and T. Masuda, “MADOCA to EPICS Gateway”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 755-759. doi:10.18429/JACoW-ICALEPCS2017-TUPHA149
[n] G. Hutter, “Comparison of Three 108-MHz Systems for 1.6 MW”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3417-3420.
[n] A. Grudiev, D. Schulte, F. Zimmermann, and K. Oide, “Electron-Cloud Effects in the Positron Linacs of Future Linear Colliders”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP44, pp. 141-143.
[n] C. Adolphsen et al., “Results from the CLIC X-Band Structure Test Program at NLCTA”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP018, pp. 2027-2029.
[n] R. H. Liu et al., “Study the Active Vibration Control System of the Parallel 6-DOF Platform”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 131. doi:10.18429/JACoW-MEDSI2020-TUPA06
[n] Q. Gu and Z. Wang, “Longitudinal Phase Space Study on Injector Beam of High Repetition Rate X-Ray FEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 584-587. doi:10.18429/JACoW-FEL2019-THB04
[n] C. Adolphsen et al., “Coupler Development and Processing Facility at SLAC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP019, pp. 2030-2032.
[n] K.-R. Kim, Y.-S. Cho, H.-S. Kim, H.-J. Kwon, and Y.-G. Song, “Reconstruction of the beamlines of the 1.7 MV tandem accelerator to address the users' demands”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS094, unpublished.
[n] T. Dehaeze, J. Bonnefoy, and G. R. L. Collette, “Mechatronics Approach for the Development of a Nano-Active-Stabilization-System”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 93. doi:10.18429/JACoW-MEDSI2020-TUIO02
[n] R. Visintini, F. Barbo, A. Buonanno, B. Mazzucco, M. Milani, and G. Simonetti, “Towards Elettra 2.0 - R&I preparation activities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2033-2035. doi:10.18429/JACoW-IPAC2024-WEPC31
[n] P. Rommeluere, Y.-M. Abiven, A. Buteau, P. Monteiro, P. Betinelli-Deck, and S. M. Minolli, “First Step to Manage Migration to Siemens S7-15XX PLCs using TANGO Framework”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1776-1780. doi:10.18429/JACoW-ICALEPCS2017-THPHA158
[n] Y. Futami et al., “Medical Application of the Positron Emitter Beam at HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A01, pp. 2554-2556.
[n] M. Akemoto, F. Hinode, K. Kubo, S. Sakanaka, and J. Urakawa, “High-power Test of a 714-MHz HOM-damped Cavity for the ATF Damping Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP059L, pp. 2017-2019.
[n] A. V. Shemyakin and L. R. Prost, “Ultimate Performance of Relativistic Electron Cooling at Fermilab”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper THIOA01, pp. 31-36.
[n] K. Bhandari, “STATUS OF THE KOLKATA K500 SUPERCONDUCTING CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18A4, pp. XX-XX.
[n] V. Rodin, A. Farricker, N. Kumar, and C. P. Welsch, “Optimization of Antiproton-Atom Collision Studies Using GEANT4”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3126-3129. doi:10.18429/JACoW-IPAC2021-WEPAB213
[n] F. Ciocci et al., “The Sub-Millimeter FEL Facility at the ENEA Frascati Research Center”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 557-559.
[n] H. Zimmermann et al., “The Frankfurt Funneling Experiment”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FOAB009, pp. 677-679.
[n] G. L. Carr et al., “Coherent Radiation Measurements at the NSLS Source Development Lab”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH069, pp. 2608-2610.
[n] R. Assmann, B. Dehning, J. Matheson, and J. Prochnow, “Nonlinear Response of Orbit Monitors”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B10, pp. 412-414.
[n] G. Burt, P. K. Ambattu, R. G. Carter, A. C. Dexter, R. M. Jones, and P. A. McIntosh, “Initial Study on the Shape Optimisation of the CLIC Crab Cavity”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP024, pp. 833-835.
[n] Ph. Gayet, E. Blanco Vinuela, B. Bradu, and R. Cirillo, “Online Analysis for Anticipated Failure Diagnostics of the CERN Cryogenic Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1412-1415. doi:10.18429/JACoW-ICALEPCS2017-THPHA030
[n] P. Saidi Bidokhti, M. Sadeghi, and A. Shirazi, “Application of Cyclotrons in Brachytherapy”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP003, pp. 51-53.
[n] V. Korchuganov et al., “The Development of Synchrotron Radiation Source of NRC Kurchatov Institute""”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper THXCH02, pp. 126-130.
[n] X. H. Chen et al., “Detector Control System of BESIII”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA30, pp. 377-379.
[n] L. Giacomel, P. Baudrenghien, X. Buffat, R. Calaga, and N. Mounet, “Mitigation Strategies for the Instabilities Induced by the Fundamental Mode of the HL-LHC Crab Cavities”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 571-574. doi:10.18429/JACoW-HB2023-THBP40
[n] R. Bacher, “The New Control System for the Future Low-Emittance Light Source PETRA 3 at DESY: Sprinting to the Finish”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB27, pp. 217-219.
[n] I. N. Meshkov, “NICA Project at JINR”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOXCH03, pp. 5-8.
[n] L. Genovese et al., “Tolerance Studies and Limitations for Photonic Bandgap Fiber Accelerators”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3605-3608. doi:10.18429/JACoW-IPAC2019-THPGW014
[n] G. Hutter et al., “New Power Amplifiers for 200 kW at 27 MHz”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1203-1206.
[n] T. Takenaka, K. Nanmo, Z. Igarashi, and E. Takasaki, “Beam Energy Stabilization of the KEK 40MeV Proton Linac”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THB09, pp. 812-814.
[n] T. Tanaka et al., “Design Study of a 35.4 MeV CW Double-Sided Microtron”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0043, pp. 449-451.
[n] H. Brown et al., “Design, Fabrication and Testing of the BNL Radio Frequency Quadrupole Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOB0007, pp. 65-67.
[n] A. Awal, J. Hetzel, and J. Pretz, “Injection optimization via reinforcement learning: from simulation to real-world application”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPS11, unpublished.
[n] P. Pollet, R. Ischebeck, D. Llorente Sancho, G. Marinkovic, C. Ozkan Loch, and V. Schlott, “System Integration of SwissFEL Beam Loss Monitors”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 170-174. doi:10.18429/JACoW-IBIC2015-MOPB051
[n] K. Sakaue et al., “3-Dimensional Beam Profile Monitor Based on a Pulse Storage in an Optical Cavity for Multi-Bunch Electron Beam”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3GRC04, pp. 1925-1927.
[n] J. R. Richardson, “The Status of TRIUMF (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-04, pp. 41-48.
[n] K. Takayama, “KEK-PS Upgrade Scenario: 500 MeV Accumulator and Super-Bunch Acceleration”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3B15, pp. 382-384.
[n] A. O. Sidorin et al., “Possibilities for Experiments with Rare Radioactive Ions in a Storage Ring Using Individual Injection”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT103, pp. 1393-1395.
[n] J. Qiang et al., “Start-to-End Simulation of the LCLS-II Beam Delivery System with Real Number of Electrons”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 714-717. doi:10.18429/JACoW-FEL2015-WEP070
[n] X. H. Lu et al., “10s Femtosecond Bunch Length Measurement Based on Coherent Transition Radiation”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM03, pp. 631-633.
[n] K. Akai et al., “Higher-Order Mode HOM Characteristics of the Choke-Mode Cavity for the KEK B-Factory KEKB”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP095L, pp. 2074-2078.
[n] A. Donadon Servelle et al., “An evaluation of collimation settings for the High Luminosity LHC baseline”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB015, unpublished.
[n] G.-T. Park, R. A. Rimmer, and H. Wang, “The Relation Between Field Flatness and the Passband Frequency in the Elliptical Cavities”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2636-2639. doi:10.18429/JACoW-IPAC2021-WEPAB020
[n] G. C. Pappas and R. L. Cassel, “An IGBT Driven Slotted Beam Pipe Kicker for SPEAR III Injection”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH034, pp. 3747-3749.
[n] W. Z. Zhang, D. S. Zhang, and W. L. Zhan, “RF SYSTEM AT HIRFL-CSR MAIN RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP025, pp. XX-XX.
[n] F. Zimmermann, “Challenges for Circular e+e- Colliders”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 7. doi:10.18429/JACoW-eeFACT2018-MOXBA01
[n] E. Bulyak and A. Mytsykov, “Method of Defining the Tolerances of Storage Ring Lenses for Imperfections and Misalignments”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1619-1622.
[n] Z. Y. Yao et al., “Tests of the Balloon Single Spoke Resonator”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 417-419. doi:10.18429/JACoW-LINAC2018-TUPO039
[n] M. Bassetti, C. Biscari, and C. Milardi, “Solenoidal Compensation Scheme for an Interaction Region of an Electron-Positron Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1036-1039.
[n] P. J. S. Barratt, A. P. Letchford, M. Perkins, C. W. Planner, and R. Sidlow, “Operational Experience of Penning H- Ion Sources at ISIS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP084L, pp. 1525-1527.
[n] H. Maesaka, H. Dewa, T. Fujita, M. Masaki, and S. Takano, “Development of Beam Position Monitor for the SPring-8 Upgrade”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 204-207. doi:10.18429/JACoW-IBIC2018-TUOC04
[n] D. Elo, D. J. Clark, R. A. Gough, and D. Morris, “Cryogenic Vacuum Pumping at the LBL 88-Inch Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-14, pp. 2179-2181.
[n] J.-P. Carneiro, V. Kamerdzhiev, A. Semenov, and R. C. Webber, “Status of the FNAL Digital Tune Monitor”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS007, pp. 3877-3879.
[n] M. Clausen, P. D. Duval, K.-H. Mess, S. Rettig, and B. Schoeneburg, “Cryogenic Controls at HERA”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 334-337.
[n] C.-M. Kleffner, N. Holtkamp, M. Nagl, H. Poggensee, J. Peters, and A. Schempp, “Operation of the Upgraded H$$-Injection System of the Linac III at DESY”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4048, pp. 875-877.
[n] B. G. Chidley, J. C. Brown, and J. Ungrin, “Conditioning Experiments on the 100% Duty Factor 3 MeV Alvarez Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S6-7, pp. 360-363.
[n] B. G. Chidley, “RFQ1 Control and Data Acquistion System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 637-640.
[n] D. Neuffer, A. Riddiford, and A. G. Ruggiero, “Study of Perodic Tune Modulation with the Beam-Beam Effect”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2433-2436.
For LaTeX
Use Complete Form
For BibTeX
References
- C. H. Rivetta, J. D. Fox, O. Turgut, W. H?Âfle, and K. S. B. Li, “Modeling and Feedback Design Techniques for Controlling Intra-bunch Instabilities at CERN SPS Ring”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper THO3AB04, pp. 399-403.
- A. Goto, “Review of High Power Cyclotrons for Heavy Ion Beams”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOM2CIO01, pp. 9-15.
- F. Zhu, K. X. Liu, S. W. Quan, F. Wang, and H. T. X. Zhong, “Beam Energy Loss in a =0.09 SRF HWR Cavity for 100 mA Proton Acceleration”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 567-570.
- H. Yang, “Measurement of Diagnostics Response by RF Parameters for Hard X-ray Line in PAL-XFEL”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 531-533.
- E. Echeverria, A. Flint, C. Pennington, M. Andorf, J. Maxson, and A. Galdi, “First Steps Toward Molecular beam epitaxial growth of potassium antimonide photocathodes”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC47, pp. 2068-2071.
- V. D. Shemelin and V. P. Yakovlev, “Equidistant Optimization of Elliptical SRF Standing Wave Cavities”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB036, pp. 480-484.
- F. Zimmermann et al., “Damping Bunch Oscillations Due to Off-Axis Injection”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2422-2425.
- J.-P. G. Tock et al., “The Special LHC Interconnections: Technologies, Organization and Quality Control”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD026, pp. 2464-2466.
- F. Pan, “Investigation of Nucleation Stage in Diffusion Coating of Nb3Sn on Nb”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 873-876.
- C. Roux et al., “Superconducting magnets for SIS100 and Super-FRS at FAIR – overview and progress”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS71, pp. 2862-2865.
- S. Kurokawa, “The Present Status of the KEKB Project”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP086G, pp. 448-450.
- Katoh T., Akiyama A., Kudo K., Nakamura T.T., Odagiri J.-I., Yamamoto N., “The Operators' Consoles for KEKB Accelerators”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper WC1P30, pp. XX-XX.
- L. Smith, “Stepped Phase Velocity Linacs”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper C-02, pp. 224-234.
- P. Sha and J. Y. Zhai, “New Cavity Techniques and Future Prospects”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 173-176.
- W. Br?ñutigam, O. Felden, R. Maier, S. Martin, R. Stassen, and E. Zaplatin, “Superconducting RF Cavity Development for ESS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP3B18, pp. 2058-2062.
- S. I. Sosa Guitron, S. Biedron, T. B. Bolin, K. A. Brown, and B. Huang, “Electromagnetic Analysis of a Circular Storage Ring for Quantum Computing Using Vsim”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2034-2035.
- J. Norem et al., “An $e^+ e^-$ Top Factory in a 50+50 TeV Hadron Collider Tunnel”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8W001, pp. 363-365.
- C. J. Liaw et al., “Cathode Puck Insertion System Design for the LEReC Photoemission DC Electron Gun”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1021-1023.
- T. Tanabe et al., “Electron Cooling Device for TARN II”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2412-2415.
- B. van der Horst, M. Helmig, A. Matheisen, S. Saegebarth, and M. Schalwat, “Series Production of BQU at DESY for the EU-XFEL Module Assembly at CEA Saclay”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB104, pp. 865-868.
- A. Yamamoto et al., “Fabrication of an X-band 30 cm Accelerating Structure by Diffusion Brazing”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2182-2185.
- D. Fanelli, A. Antoniazzi, R. Bachelard, C. Chandre, X. Leoncini, and M. Vittot, “Control of the Intensity of a Wave Interacting with Charged Particles”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH022, pp. 83-86.
- J. I. M. Botman and C. A. Thomas, “Simulations on Harmonic Generation with the Particle Tracking Code GPT”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH123, pp. 2763-2765.
- A. A. Fateev, E. V. Gorbachev, H. P. Nazlev, and V. A. Bulanov, “The Pulsed High Voltage Power Supply for the NICA Booster Injection System”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 592-593.
- L. G. Sukhikh et al., “Focusing of Optical Transition and Diffraction Radiation by a Spherical Target”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB13, pp. 259-261.
- E. A. Nissen, A. K?ñllberg, and A. Simonsson, “Further Measurements of Beam-Beam Interactions in a Gear-Changing System in DESIREE”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1810-1812.
- B. Mustapha, P. N. Ostroumov, M. A. Fraser, and A. Perry, “Simultaneous Acceleration of Radioactive and Stable Beams in the ATLAS Linac”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper THO1AB01, pp. 334-339.
- L. W. Lai et al., “The Development and Applications of the Digital BPM Signal Processor at SINAP”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 43-45.
- M. N. Nguyen, C. Burkhart, K. J. P. Macken, and J. J. Olsen, “Compact, Intelligent, Digitally Controlled IGBT Gate Drivers for a PEBB-based ILC Marx Modulator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD100, pp. 3335-3337.
- M. P. Sangroula et al., “Design Update on the HSR Injection Kicker for the EIC”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1904-1907.
- A. Kiyomichi and T. Masuda, “MADOCA to EPICS Gateway”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 755-759.
- G. Hutter, “Comparison of Three 108-MHz Systems for 1.6 MW”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3417-3420.
- A. Grudiev, D. Schulte, F. Zimmermann, and K. Oide, “Electron-Cloud Effects in the Positron Linacs of Future Linear Colliders”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP44, pp. 141-143.
- C. Adolphsen et al., “Results from the CLIC X-Band Structure Test Program at NLCTA”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP018, pp. 2027-2029.
- R. H. Liu et al., “Study the Active Vibration Control System of the Parallel 6-DOF Platform”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 131.
- Q. Gu and Z. Wang, “Longitudinal Phase Space Study on Injector Beam of High Repetition Rate X-Ray FEL”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 584-587.
- C. Adolphsen et al., “Coupler Development and Processing Facility at SLAC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP019, pp. 2030-2032.
- K.-R. Kim, Y.-S. Cho, H.-S. Kim, H.-J. Kwon, and Y.-G. Song, “Reconstruction of the beamlines of the 1.7 MV tandem accelerator to address the users' demands”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS094, this conference.
- T. Dehaeze, J. Bonnefoy, and G. R. L. Collette, “Mechatronics Approach for the Development of a Nano-Active-Stabilization-System”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 93.
- R. Visintini, F. Barbo, A. Buonanno, B. Mazzucco, M. Milani, and G. Simonetti, “Towards Elettra 2.0 - R&I preparation activities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC31, pp. 2033-2035.
- P. Rommeluere, Y.-M. Abiven, A. Buteau, P. Monteiro, P. Betinelli-Deck, and S. M. Minolli, “First Step to Manage Migration to Siemens S7-15XX PLCs using TANGO Framework”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1776-1780.
- Y. Futami et al., “Medical Application of the Positron Emitter Beam at HIMAC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A01, pp. 2554-2556.
- M. Akemoto, F. Hinode, K. Kubo, S. Sakanaka, and J. Urakawa, “High-power Test of a 714-MHz HOM-damped Cavity for the ATF Damping Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP059L, pp. 2017-2019.
- A. V. Shemyakin and L. R. Prost, “Ultimate Performance of Relativistic Electron Cooling at Fermilab”, in Proc. 8th Workshop on Beam Cooling and Related Topics (COOL'11), Alushta, Ukraine, Sep. 2011, paper THIOA01, pp. 31-36.
- K. Bhandari, “STATUS OF THE KOLKATA K500 SUPERCONDUCTING CYCLOTRON”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18A4, pp. XX-XX.
- V. Rodin, A. Farricker, N. Kumar, and C. P. Welsch, “Optimization of Antiproton-Atom Collision Studies Using GEANT4”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3126-3129.
- F. Ciocci et al., “The Sub-Millimeter FEL Facility at the ENEA Frascati Research Center”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 557-559.
- H. Zimmermann et al., “The Frankfurt Funneling Experiment”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FOAB009, pp. 677-679.
- G. L. Carr et al., “Coherent Radiation Measurements at the NSLS Source Development Lab”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH069, pp. 2608-2610.
- R. Assmann, B. Dehning, J. Matheson, and J. Prochnow, “Nonlinear Response of Orbit Monitors”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6B10, pp. 412-414.
- G. Burt, P. K. Ambattu, R. G. Carter, A. C. Dexter, R. M. Jones, and P. A. McIntosh, “Initial Study on the Shape Optimisation of the CLIC Crab Cavity”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP024, pp. 833-835.
- Ph. Gayet, E. Blanco Vinuela, B. Bradu, and R. Cirillo, “Online Analysis for Anticipated Failure Diagnostics of the CERN Cryogenic Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1412-1415.
- P. Saidi Bidokhti, M. Sadeghi, and A. Shirazi, “Application of Cyclotrons in Brachytherapy”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP003, pp. 51-53.
- V. Korchuganov et al., “The Development of Synchrotron Radiation Source of NRC Kurchatov Institute""”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper THXCH02, pp. 126-130.
- X. H. Chen et al., “Detector Control System of BESIII”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA30, pp. 377-379.
- L. Giacomel, P. Baudrenghien, X. Buffat, R. Calaga, and N. Mounet, “Mitigation Strategies for the Instabilities Induced by the Fundamental Mode of the HL-LHC Crab Cavities”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THBP40, pp. 571-574.
- R. Bacher, “The New Control System for the Future Low-Emittance Light Source PETRA 3 at DESY: Sprinting to the Finish”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB27, pp. 217-219.
- I. N. Meshkov, “NICA Project at JINR”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper MOXCH03, pp. 5-8.
- L. Genovese et al., “Tolerance Studies and Limitations for Photonic Bandgap Fiber Accelerators”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3605-3608.
- G. Hutter et al., “New Power Amplifiers for 200 kW at 27 MHz”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1203-1206.
- T. Takenaka, K. Nanmo, Z. Igarashi, and E. Takasaki, “Beam Energy Stabilization of the KEK 40MeV Proton Linac”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THB09, pp. 812-814.
- T. Tanaka et al., “Design Study of a 35.4 MeV CW Double-Sided Microtron”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0043, pp. 449-451.
- H. Brown et al., “Design, Fabrication and Testing of the BNL Radio Frequency Quadrupole Accelerator”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper MOB0007, pp. 65-67.
- A. Awal, J. Hetzel, and J. Pretz, “Injection optimization via reinforcement learning: from simulation to real-world application”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS11, unpublished.
- P. Pollet, R. Ischebeck, D. Llorente Sancho, G. Marinkovic, C. Ozkan Loch, and V. Schlott, “System Integration of SwissFEL Beam Loss Monitors”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 170-174.
- K. Sakaue et al., “3-Dimensional Beam Profile Monitor Based on a Pulse Storage in an Optical Cavity for Multi-Bunch Electron Beam”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE3GRC04, pp. 1925-1927.
- J. R. Richardson, “The Status of TRIUMF (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-04, pp. 41-48.
- K. Takayama, “KEK-PS Upgrade Scenario: 500 MeV Accumulator and Super-Bunch Acceleration”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3B15, pp. 382-384.
- A. O. Sidorin et al., “Possibilities for Experiments with Rare Radioactive Ions in a Storage Ring Using Individual Injection”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT103, pp. 1393-1395.
- J. Qiang et al., “Start-to-End Simulation of the LCLS-II Beam Delivery System with Real Number of Electrons”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 714-717.
- X. H. Lu et al., “10s Femtosecond Bunch Length Measurement Based on Coherent Transition Radiation”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM03, pp. 631-633.
- K. Akai et al., “Higher-Order Mode HOM Characteristics of the Choke-Mode Cavity for the KEK B-Factory KEKB”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP095L, pp. 2074-2078.
- A. Donadon Servelle et al., “An evaluation of collimation settings for the High Luminosity LHC baseline”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB015, this conference.
- G.-T. Park, R. A. Rimmer, and H. Wang, “The Relation Between Field Flatness and the Passband Frequency in the Elliptical Cavities”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2636-2639.
- G. C. Pappas and R. L. Cassel, “An IGBT Driven Slotted Beam Pipe Kicker for SPEAR III Injection”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH034, pp. 3747-3749.
- W. Z. Zhang, D. S. Zhang, and W. L. Zhan, “RF SYSTEM AT HIRFL-CSR MAIN RING”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THP025, pp. XX-XX.
- F. Zimmermann, “Challenges for Circular e+e- Colliders”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 7.
- E. Bulyak and A. Mytsykov, “Method of Defining the Tolerances of Storage Ring Lenses for Imperfections and Misalignments”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1619-1622.
- Z. Y. Yao et al., “Tests of the Balloon Single Spoke Resonator”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 417-419.
- M. Bassetti, C. Biscari, and C. Milardi, “Solenoidal Compensation Scheme for an Interaction Region of an Electron-Positron Collider”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1036-1039.
- P. J. S. Barratt, A. P. Letchford, M. Perkins, C. W. Planner, and R. Sidlow, “Operational Experience of Penning H- Ion Sources at ISIS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP084L, pp. 1525-1527.
- H. Maesaka, H. Dewa, T. Fujita, M. Masaki, and S. Takano, “Development of Beam Position Monitor for the SPring-8 Upgrade”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 204-207.
- D. Elo, D. J. Clark, R. A. Gough, and D. Morris, “Cryogenic Vacuum Pumping at the LBL 88-Inch Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper D-14, pp. 2179-2181.
- J.-P. Carneiro, V. Kamerdzhiev, A. Semenov, and R. C. Webber, “Status of the FNAL Digital Tune Monitor”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS007, pp. 3877-3879.
- M. Clausen, P. D. Duval, K.-H. Mess, S. Rettig, and B. Schoeneburg, “Cryogenic Controls at HERA”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 334-337.
- C.-M. Kleffner, N. Holtkamp, M. Nagl, H. Poggensee, J. Peters, and A. Schempp, “Operation of the Upgraded H$$-Injection System of the Linac III at DESY”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4048, pp. 875-877.
- B. G. Chidley, J. C. Brown, and J. Ungrin, “Conditioning Experiments on the 100% Duty Factor 3 MeV Alvarez Linac”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S6-7, pp. 360-363.
- B. G. Chidley, “RFQ1 Control and Data Acquistion System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 637-640.
- D. Neuffer, A. Riddiford, and A. G. Ruggiero, “Study of Perodic Tune Modulation with the Beam-Beam Effect”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2433-2436.
Back to search