Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. R. Delayen, M. Spata, and H. Wang, “Options for an 11 GeV RF Beam Separator for the Jefferson Lab CEBAF Upgrade”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP044, pp. 1644-1646.
[n] S. Schreiber, B. Faatz, and K. Honkavaara, “Operation of FLASH at 6.5 nm Wavelength”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC030, pp. 133-135.
[n] C. Poloni and R. P. Walker, “Mechanical Design of the ELETTRA Insertion Devices and Vacuum Chamber”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1362-1365.
[n] M. Turenne, F. Hunte, R. P. Johnson, and J. Schwartz, “Multi-Purpose Fiber Optic Sensors for High Temperature Superconductor Magnets”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP072, pp. 298-300.
[n] T. Ha, S. H. Kim, C. D. Park, S. Shin, G. Kim, and H. K. Park, “Introduction to 3D Printing Techniques for Accelerator Vacuum Systems”, in Proc. IPAC'20, Caen, France, May 2020, paper THVIR11, pp. XX-XX.
[n] W. J. Corbett, “High Level Matlab Applications for SPEAR3”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL035, pp. 97-99.
[n] A. Drago, A. Ghigo, F. Sannibale, M. Serio, and G. di Pirro, “The DAFNE Timing System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP035L, pp. 1775-1777.
[n] R. P. Walker, R. Bracco, B. Diviacco, D. Millo, C. Poloni, and D. Zangrando, “Status of the Development of Insertion Devices for ELETTRA”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1656-1659.
[n] H. Huck, R. Burek, G. Schmidt, and K. Wille, “Improvement and Recent Results of the DELTA Storage Ring FEL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC011, pp. 88-90.
[n] A. A. Green et al., “Pulsed Integrating Feedback Amplifier Position Control of Intermediate Energy Proton Beams”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-37, pp. 306-309.
[n] J. K. Tiskumara, J. R. Delayen, G. V. Eremeev, U. Pudasaini, and C. E. Reece, “Nb3Sn Coating of Twin Axis Cavity for SRF Applications”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 146. doi:10.18429/JACoW-SRF2021-SUPTEV011
[n] T. Matsumoto, T. Kudo, T. Masuda, and R. Tanaka, “Upgrade of RF Control System at SPring-8”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP031, pp. 730-732.
[n] I. D. Rodis and A. Topaloudis, “Common Standards for JavaFX GUI Development and its Application to the Renovation of the CERN Beam Instrumentation Software Portal and Delivery Mechanism”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1861-1864. doi:10.18429/JACoW-ICALEPCS2017-THPHA182
For LaTeX
Use Complete Form
For BibTeX
References
- J. R. Delayen, M. Spata, and H. Wang, “Options for an 11 GeV RF Beam Separator for the Jefferson Lab CEBAF Upgrade”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP044, pp. 1644-1646.
- S. Schreiber, B. Faatz, and K. Honkavaara, “Operation of FLASH at 6.5 nm Wavelength”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC030, pp. 133-135.
- C. Poloni and R. P. Walker, “Mechanical Design of the ELETTRA Insertion Devices and Vacuum Chamber”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1362-1365.
- M. Turenne, F. Hunte, R. P. Johnson, and J. Schwartz, “Multi-Purpose Fiber Optic Sensors for High Temperature Superconductor Magnets”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP072, pp. 298-300.
- T. Ha, S. H. Kim, C. D. Park, S. Shin, G. Kim, and H. K. Park, “Introduction to 3D Printing Techniques for Accelerator Vacuum Systems”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper THVIR11, pp. XX-XX.
- W. J. Corbett, “High Level Matlab Applications for SPEAR3”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL035, pp. 97-99.
- A. Drago, A. Ghigo, F. Sannibale, M. Serio, and G. di Pirro, “The DAFNE Timing System”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP035L, pp. 1775-1777.
- R. P. Walker, R. Bracco, B. Diviacco, D. Millo, C. Poloni, and D. Zangrando, “Status of the Development of Insertion Devices for ELETTRA”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1656-1659.
- H. Huck, R. Burek, G. Schmidt, and K. Wille, “Improvement and Recent Results of the DELTA Storage Ring FEL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC011, pp. 88-90.
- A. A. Green et al., “Pulsed Integrating Feedback Amplifier Position Control of Intermediate Energy Proton Beams”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-37, pp. 306-309.
- J. K. Tiskumara, J. R. Delayen, G. V. Eremeev, U. Pudasaini, and C. E. Reece, “Nb3Sn Coating of Twin Axis Cavity for SRF Applications”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 146.
- T. Matsumoto, T. Kudo, T. Masuda, and R. Tanaka, “Upgrade of RF Control System at SPring-8”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP031, pp. 730-732.
- I. D. Rodis and A. Topaloudis, “Common Standards for JavaFX GUI Development and its Application to the Renovation of the CERN Beam Instrumentation Software Portal and Delivery Mechanism”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1861-1864.
Back to search