Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. M. Bieniosek, W. Ghiorso, and L. R. Prost, “Beam Imaging Diagnostics for Heavy Ion Beam Fusion Experiments”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB050, pp. 2524-2526.
[n] Y. Renier et al., “Latest News on High Average RF Power Operation at PITZ”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 59-61. doi:10.18429/JACoW-LINAC2016-MOOP08
[n] H. C. Liu, S. Fu, K. Y. Gong, H. F. Ouyang, and J. Peng, “Design and Experimental Results of an Electro-static Pre-chopper for CSNS LEBT”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI025, pp. 3351-3353.
[n] Y. Li et al., “In-situ Secondary Electron Yield Measurement System at CesrTA”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP230, pp. 1253-1255.
[n] H. Hahn and D. Davino, “RHIC Abort Kicker with Reduced Coupling Impedance”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI035, pp. 1502-1504.
[n] J. Keil, G. Kube, F. Obier, G. K. Sahoo, and R. Wanzenberg, “Optimization of the Injection Kicker Bump Leakage at PETRA III”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1467-1470. doi:10.18429/JACoW-IPAC2018-TUPMF084
[n] L. Zhang, “Thermal Deformation Modelling Attempt of a Storage Ring Vacuum Vessel”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP5B13, pp. 2486-2488.
[n] J. E. Chen, K. X. Liu, and K. Zhao, “TESLA Technology in China”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper MOOCAU01, pp. 42-45.
[n] A. Ermakov, D. Kostin, and W.-D. Moeller, “Quality Control of Welding, Brazing Joints and Cu Deposition on EU-XFEL Coupler Parts”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB076, pp. 1301-1305.
[n] K. Sasa, T. Hattori, T. Ito, Y. Oguri, M. Okada, and M. Okamura, “Design of a Transport System after the TIT-RFQ for Beam-Plasma Interaction Experiments”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-92, pp. 582-584.
[n] A. Kling, K. Balewski, and R. Bartolini, “Turn-by-turn Data Analysis for PETRA III”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA017, pp. 2514-2516.
[n] J. Ungrin et al., “Construction of a High-Power RF Resonant Test Load”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B12, pp. 68-70.
[n] Y.-C. Chae and L. H. Morrison, “The Collective Effects of Long Straight Sections (LSSs) in the Advanced Photon Source Upgrade”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR082, pp. 3120-3122.
[n] A. Kling, “Dust Macroparticles in HERA and DORIS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS002, pp. 1486-1488.
[n] Z. Kormány and I. Ander, “New Digital NMR System for an Old Analyzing Magnet”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC089, pp. 1215-1217.
[n] P. Chen, M. Lundquist, and D. Yu, “A Novel Solid-State Marx Modulator Topology with Voltage Droop Self-Compensation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD082, pp. 3707-3709.
[n] W. Ebeling et al., “Superconduting RF-Cavities for a 30-GeV PETRA Storage Ring”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3357-3360.
[n] B. G. Chidley, J. C. Brown, G. E. McMichael, S. O. Schriber, M. R. Shubaly, and J. Ungrin, “Design and Constraints for the ZEBRA Injector, RFQ and DTL”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B06, pp. 49-52.
[n] O. V. Sinitsyn, T. M. Antonsen, and G. S. Nusinovich, “Self-consistent Time-dependent Quasi-3D Model of Multipactor in Dielectric-loaded Accelerating Structures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC041, pp. 1090-1092.
[n] T. Sen, C. M. Bhat, H. J. Kim, and J.-F. Ostiguy, “Dynamics of Flat Bunches with Second Harmonic RF”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD067, pp. 2078-2080.
[n] N. K. Abrossimov et al., “DESIGN AND EXPERIMENTAL INVESTIGATION OF THE 200-900 MEV PROTON BEAM OBTAINED BY THE MODERATION OF 1000 MEV PROTONS IN THE DEGRADER”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THCP04, pp. XX-XX.
[n] S. Jin, X. Y. Lu, K. Zhao, R. A. Rimmer, and A. T. Wu, “Study of I-V Characteristics at Different Locations Inside a Demountable Nb SRF Cavity During Vertical BEP and EP Treatments”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO033, pp. 450-455.
[n] M. Pugliese, F. Bill?¿, D. Favretto, N. Guidi, and M. Turcinovich, “Managing by Objectives a Research Infrastructure”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC083, pp. 292-295.
[n] H. Hayano et al., “Optics Diagnostics and Tuning for Low Emittance Beam in KEK-ATF Damping Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA21, pp. 3432-3434.
[n] J. S. L. Yap et al., “Beam Characterisation Using MEDIPIX3 and EBT3 Film at the Clatterbridge Proton Therapy Beamline”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3510-3513. doi:10.18429/JACoW-IPAC2019-THPMP033
[n] K. R. Prestwich, “Harp, A Short Pulse, High Current Electron Beam Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 975-979.
[n] A. Devia, F. Angulo, and G. A. Gonzalez, “Numerical Code for the Relation Dispersion of Cylindrical and Inhomogeneous Plasma”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1388-1391.
[n] M. Blank et al., “Experimental Demonstration of High Power Millimeter Wave Gyro-Amplifers”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP151, pp. 1016-1018.
For LaTeX
Use Complete Form
For BibTeX
References
- F. M. Bieniosek, W. Ghiorso, and L. R. Prost, “Beam Imaging Diagnostics for Heavy Ion Beam Fusion Experiments”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB050, pp. 2524-2526.
- Y. Renier et al., “Latest News on High Average RF Power Operation at PITZ”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 59-61.
- H. C. Liu, S. Fu, K. Y. Gong, H. F. Ouyang, and J. Peng, “Design and Experimental Results of an Electro-static Pre-chopper for CSNS LEBT”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI025, pp. 3351-3353.
- Y. Li et al., “In-situ Secondary Electron Yield Measurement System at CesrTA”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP230, pp. 1253-1255.
- H. Hahn and D. Davino, “RHIC Abort Kicker with Reduced Coupling Impedance”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI035, pp. 1502-1504.
- J. Keil, G. Kube, F. Obier, G. K. Sahoo, and R. Wanzenberg, “Optimization of the Injection Kicker Bump Leakage at PETRA III”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1467-1470.
- L. Zhang, “Thermal Deformation Modelling Attempt of a Storage Ring Vacuum Vessel”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP5B13, pp. 2486-2488.
- J. E. Chen, K. X. Liu, and K. Zhao, “TESLA Technology in China”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper MOOCAU01, pp. 42-45.
- A. Ermakov, D. Kostin, and W.-D. Moeller, “Quality Control of Welding, Brazing Joints and Cu Deposition on EU-XFEL Coupler Parts”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB076, pp. 1301-1305.
- K. Sasa, T. Hattori, T. Ito, Y. Oguri, M. Okada, and M. Okamura, “Design of a Transport System after the TIT-RFQ for Beam-Plasma Interaction Experiments”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-92, pp. 582-584.
- A. Kling, K. Balewski, and R. Bartolini, “Turn-by-turn Data Analysis for PETRA III”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA017, pp. 2514-2516.
- J. Ungrin et al., “Construction of a High-Power RF Resonant Test Load”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B12, pp. 68-70.
- Y.-C. Chae and L. H. Morrison, “The Collective Effects of Long Straight Sections (LSSs) in the Advanced Photon Source Upgrade”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR082, pp. 3120-3122.
- A. Kling, “Dust Macroparticles in HERA and DORIS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS002, pp. 1486-1488.
- Z. Kormány and I. Ander, “New Digital NMR System for an Old Analyzing Magnet”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC089, pp. 1215-1217.
- P. Chen, M. Lundquist, and D. Yu, “A Novel Solid-State Marx Modulator Topology with Voltage Droop Self-Compensation”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD082, pp. 3707-3709.
- W. Ebeling et al., “Superconduting RF-Cavities for a 30-GeV PETRA Storage Ring”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3357-3360.
- B. G. Chidley, J. C. Brown, G. E. McMichael, S. O. Schriber, M. R. Shubaly, and J. Ungrin, “Design and Constraints for the ZEBRA Injector, RFQ and DTL”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B06, pp. 49-52.
- O. V. Sinitsyn, T. M. Antonsen, and G. S. Nusinovich, “Self-consistent Time-dependent Quasi-3D Model of Multipactor in Dielectric-loaded Accelerating Structures”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC041, pp. 1090-1092.
- T. Sen, C. M. Bhat, H. J. Kim, and J.-F. Ostiguy, “Dynamics of Flat Bunches with Second Harmonic RF”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD067, pp. 2078-2080.
- N. K. Abrossimov et al., “DESIGN AND EXPERIMENTAL INVESTIGATION OF THE 200-900 MEV PROTON BEAM OBTAINED BY THE MODERATION OF 1000 MEV PROTONS IN THE DEGRADER”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THCP04, pp. XX-XX.
- S. Jin, X. Y. Lu, K. Zhao, R. A. Rimmer, and A. T. Wu, “Study of I-V Characteristics at Different Locations Inside a Demountable Nb SRF Cavity During Vertical BEP and EP Treatments”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO033, pp. 450-455.
- M. Pugliese, F. Bill?¿, D. Favretto, N. Guidi, and M. Turcinovich, “Managing by Objectives a Research Infrastructure”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC083, pp. 292-295.
- H. Hayano et al., “Optics Diagnostics and Tuning for Low Emittance Beam in KEK-ATF Damping Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA21, pp. 3432-3434.
- J. S. L. Yap et al., “Beam Characterisation Using MEDIPIX3 and EBT3 Film at the Clatterbridge Proton Therapy Beamline”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3510-3513.
- K. R. Prestwich, “Harp, A Short Pulse, High Current Electron Beam Accelerator”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 975-979.
- A. Devia, F. Angulo, and G. A. Gonzalez, “Numerical Code for the Relation Dispersion of Cylindrical and Inhomogeneous Plasma”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1388-1391.
- M. Blank et al., “Experimental Demonstration of High Power Millimeter Wave Gyro-Amplifers”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP151, pp. 1016-1018.
Back to search