JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	R. A. Bosch, M. A. Green, R. W. C. Hansen, K. D. Jacobs, R. L. Julian, and K. J. Kleman, “Throughput and Noise of the Aladdin Infrared Beamline”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB052, pp. 929-931. 
[n]	F. Maimone et al., “Status of the Versatile Ion Source VIS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC151, pp. 430-432. 
[n]	Y. L. Chi et al., “Progress on the Construction of the 100 MeV / 100 kW Electron Linac for the NSC KIPT Neutron Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI031, pp. 351-353. 
[n]	G. Amendola et al., “Design Study of the Low Energy Part of the CERN Pb Ion Injector”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 545-548. 
[n]	F. D. Dziuba et al., “First Cold Tests of the Superconducting cw Demonstrator at GSI”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 84-86. doi:10.18429/JACoW-RUPAC2016-WECBMH01
[n]	M. K. Sullivan, “IR Design for High Luminosity and Low Backgrounds”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 194. doi:10.18429/JACoW-eeFACT2018-WEXBA01
[n]	T. Kamitani et al., “A Simulation Study on KEK Positron Generator”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-29, pp. 377-379. 
[n]	N. S. Sudar, J. P. Duris, and P. Musumeci, “IFEL Driven Micro-Electro-Mechanical System Free Electron Laser”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP045, pp. 481-484. 
[n]	H. Maesaka, T. Ohshima, Y. Otake, and S. Matsubara, “Design and Performance of the Optical Fiber Length Stabilization System for SACLA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1906-1908. doi:10.18429/JACoW-IPAC2014-WEOBB01
[n]	P. Mandin et al., “Two Shielded End-Stations at MARS Beamline of SOLEIL Synchrotron: Specific Devices for the Highly Irradiating Materials Analysis”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper WEPB10, pp. XX-XX. 
[n]	J. Zhang, A. Chao, J. Y. Li, C. Sun, W. Wu, and Y. K. Wu, “Feasibility Study of Electron Beam Polarization Measurement Using Touschek Lifetime”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP054, pp. 1671-1673. 
[n]	K. Wittenburg, “Experience with the Residual Gas Ionisation Beam Profile Monitors at the DESY Proton Accelerators”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1133-1136. 
[n]	M. Comunian, G. V. Lamanna, and A. Pisent, “TRASCO RFQ Design”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6B13, pp. 927-929. 
[n]	D. Bulfone and P. Michelini, “The ELETTRA Power Supply Control System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1158-1161. 
[n]	M. K. Sullivan, “e+e- Factories”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOYKI01, pp. 12-16. 
[n]	D. Marx, R. W. Assmann, R. T. P. D, and B. Marchetti, “Simulations of 3D Charge Density Measurements for Commissioning of the PolariX-TDS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1930-1933. doi:10.18429/JACoW-IPAC2018-WEPAF050
[n]	V. Andreev, H. Ao, G. Bisoffi, and K. W. Shepard, “Design of the Fast Tuner Loop for Superconducting RFQs at INFN-LNL”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6B10, pp. 2013-2015. 
[n]	G. Bisoffi et al., “Superconducting RFQs”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper MOP05, pp. 123-127. 
[n]	G. Bisoffi et al., “Prototype of a Superconducting RFQ for a Heavy Ion Injector Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W023, pp. 1087-1089. 
[n]	P. Adderley et al., “The Control and Diagnostics System for the CEBAF Injector”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-38, pp. 406-408. 
[n]	R. W. Connatser, “Introduction to Neutron Scattering Instruments - How are they Different?”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 360-362. doi:10.18429/JACoW-MEDSI2016-WEPE30
[n]	Z. C. Liu and J. Gao, “A Green CEPC Using the Power of Nuclear Waste”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THT5A2, pp. 49-53. 
[n]	P. Bauer et al., “Proposals for Improvements of the Correction of Sextupole Dynamic Effects in the Tevatron Dipole Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT120, pp. 818-820. 
[n]	J. C. Tompkins, J. A. Clarke, V. S. Kashikhin, M. A. Palmer, and B. Parker, “Superconducting Magnet Needs for the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRXKI01, pp. 3732-3736. 
[n]	M. Tomizawa, “Overview of beam loss mechanisms in injection and extraction”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEAZ01, pp. 172-176. 
[n]	A. Saini, J.-F. Ostiguy, N. Solyak, and V. P. Yakovlev, “Studies of Fault Scenarios in SC CW Project-X Linac”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA10, pp. 318-320. 
[n]	H. K. Sayed, H. G. Kirk, R. B. Palmer, D. Stratakis, K. T. McDonald, and D. V. Neuffer, “Design and Simulation of a High Intensity Muon Beam Production for Neutrino Experiments.”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 589-591. doi:10.18429/JACoW-IPAC2014-MOPRI007
[n]	F. D. Dziuba et al., “First Performance Test on the Superconducting 217 MHz CH Cavity at 4.2 K”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 953-955. doi:10.18429/JACoW-LINAC2016-THPLR044
[n]	K. L. F. Bane et al., “Untrapped HOM Radiation Absorption in the LCLS-II Cryomodules”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP126, pp. 351-354. 
[n]	Y. Sato et al., “Beam Dynamics Simulations of J-PARC Main Ring for Upgrade Plan of Fast Extraction Operation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS005, pp. 598-600. 
[n]	S. Paret and J. Qiang, “Collisional Effects in Particle-in-Cell Beam-Beam Simulations”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME059, pp. 1700-1702. 
[n]	R. Mueller, “Graphics Server and Action Language Interpreter greatly Simplify the Composition of a Graphical User Interface”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1167-1170. 
[n]	G. Velev et al., “Slowly Rotating Coil System for AC Field Measurements of Fermilab Booster Correctors”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS021, pp. 476-478. 
[n]	D. M. Welsch, A. Lehrach, B. Lorentz, R. Maier, D. Prasuhn, and R. T?Âlle, “Closed Orbit Correction and Sextupole Compensation Schemes for Normal-conducting HESR”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC076, pp. 3161-3163. 
[n]	I. Boscolo and A. Scurati, “Stable Ampere Level Emission of Energetic Electrons by Electrically Excited Ferroelectric Ceramics”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4057, pp. 526-528. 
[n]	A. Calanna et al., “Upgrade of the LNS Superconducting Cyclotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3779-3781. doi:10.18429/JACoW-IPAC2015-THPF037
[n]	V. A. Goryashko, A. Opanasenko, and V. Zhaunerchyk, “A Swedish Compact Linac-based THz/X-ray Source at FREIA”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP079, pp. 545-548. 
[n]	M. Cavenago et al., “A RFQ Cooler Development”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3627-3630. doi:10.18429/JACoW-IPAC2018-THPAL008
[n]	H. Maesaka et al., “Development of MTCA.4-Based BPM Electronics for SPring-8 Upgrade”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 471-474. doi:10.18429/JACoW-IBIC2019-WEBO03
[n]	L. A. C. Piazza, M. M. Maggiore, L. Calabretta, D. Campo, D. Rifuggiato, and A. Calanna, “A Superconducting Ring Cyclotron to Search for CP Violation in the Neutrino Sector”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS072, pp. 2670-2672. 
[n]	W. Wittmer et al., “Synchrotron Light Options at Super-B”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP140, pp. 2384-2386. 
[n]	F. Burkart et al., “Halo Scrapings with Collimators in the LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ030, pp. 3756-3758. 
[n]	G. Bisoffi, A. Lombardi, and G. Algise, “Superconducting RFQ Cavities of the New Heavy Ion Injector at Legnaro”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F26, pp. 677-681. 
[n]	S. Lederer et al., “Photocathodes at FLASH”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP029, pp. 625-627. 
[n]	R. Chehab, G. Bienvenu, and M. Taurigna, “Beam Emittance Determination using Optical Transition Radiation”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1139-1142. 
[n]	D. Stratakis, A. Alekou, D. V. Neuffer, P. Snopok, J. Pasternak, and C. T. Rogers, “Alternative Muon Cooling Options based on Particle-Matter-Interaction for a Neutrino Factory”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI087, pp. 1550-1552. 
[n]	S. Kazama, T. Kamitani, P. Bambade, and V. Kubytskyi, “Development of CVD Diamond Detector for Beam Conditioning Monitor at the SuperKEKB Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2707-2710. doi:10.18429/JACoW-IPAC2016-WEPOR019

For LaTeX

Use Complete Form

For BibTeX

References

Back to search