Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. C. Herrera, E. G. Gill, and E. C. Raka, “Aperture Utilization in the AGS”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 970-973.
[n] D. Schulze, A. Hornung, and P. Schlick, “Progress in Electronic Frequency Control of Superconducting Helix Resonators”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3748-3751.
[n] L. Hu, Y. X. Qiu, and J. Zhuang, “Design and Implementation of Experimental Information Log System for CSNS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA066, pp. XX-XX.
[n] B. Du, J. Pang, K. Wu, and S. Zhang, “Development of low-level RF control system for Injector of Hefei Advanced Light Facility project”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS130, unpublished.
[n] J. Miertusova and N. Pangos, “Insertion Device Vacuum Chamber for the ELETTRA Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP05, pp. 2045-2047.
[n] T. Wang, Y. He, and Z. Wang, “Research on compensation of a rf cavity failure in a superconducting linac by reinforcement learning algorithm”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper TUP12, unpublished.
[n] W. Gu, H. Zha, J. Shi, and H. Chen, “Using octupoles to create uniform electron beam produced by irradiation accelerators”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3653-3655. doi:10.18429/JACoW-IPAC2024-THPR59
[n] Y. S. Qin, W. L. Chen, Y. He, Y. L. Huang, and H. Jia, “A Beam Splitting System for High Power CW Proton Beam”, presented at the SAP'23, Xichang, China, Jul. 2023, paper TUPB003, unpublished.
[n] K. Wu et al., “Upgrade of LLRF control system for infrared free-electron laser”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3372-3374. doi:10.18429/JACoW-IPAC2024-THPG47
[n] K. Wu, B. Du, J. Pang, and S. Zhang, “Upgrade of IR-FEL low-level RF control system based on beam load feedforward”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS065, unpublished.
[n] Y. Zhang, E. Carideo, M. Migliorati, N. Wang, and M. Zobov, “Combined Effect of Beam-Beam Interaction and Beam Coupling Impedance in Future Circular Colliders”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 25-30. doi:10.18429/JACoW-IPAC2021-MOXC01
[n] X. Z. Qiu, X. J. Wang, K. Batchelor, and I. Ben-Zvi, “Transition Radiation Electron Beam Diagnostic Study at ATF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB01, pp. 2530-2532.
[n] J. Lewis, G. Ciovati, J. Armstrong, K. Harding, and N. Huque, “Design of a shipping fixture for a compact cryomodule hermetic assembly”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP076, unpublished.
[n] E. Fabrici and A. Salomone, “The Extraction System for the Superconducting Cyclotron at the University of Milan”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-33, pp. 501-503.
[n] B. Yan et al., “Orbit alignment study in the collimation section at the European XFEL”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 142-145. doi:10.18429/JACoW-IPAC2025-MOPB037
[n] M. K. Dey et al., “Beam Tuning in Kolkata Superconducting Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP041, pp. 132-134.
[n] A. C. Mezger and M. Seidel, “Control and Protection Aspects of the Megawatt Proton Accelerator at PSI”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper TUO1A04, pp. 281-285.
[n] I. Ben-Zvi, X. J. Wang, K. Batchelor, M. Woodle, J. Sheehan, and D. Lynch, “Design and Construction of a Full Copper Photocathode RF Gun”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3000-3003.
[n] S. De Silva and T. Satogata, “SRF cavities for crabbing at the Electron-Ion Collider”, presented at the IPAC'23, Venice, Italy, May 2023, paper THYG1, unpublished.
[n] J. Tong, Q. Yuan, and Y. Liu, “Control system of injection and extraction for synchrotron-based proton therapy facility”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPG25, unpublished.
[n] K. Chen et al., “Commissioning simulation for the HALF storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2043-2045. doi:10.18429/JACoW-IPAC2024-WEPC38
[n] Y. X. Qiu, L. Hu, K. Zhou, and J. Zhuang, “Control Software of CSNS Multi-Purpose Reflectometer”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper MOPHA170, pp. XX-XX.
[n] J. Knobloch, W. Anders, and X. Yu, “Cryogenic Considerations for CW Operation of TESLA-type Superconducting Cavity Modules for the BESSY FEL”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF010, pp. 976-978.
[n] J. Szczesny, J. Bobnar, P. Duval, T. Kosuge, M. Lomperski, and H. Wu, “ACOP.?áNET : Not Just Another GUI Builder”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 139-143. doi:10.18429/JACoW-PCaPAC2018-THCB1
[n] Q. Wu, Y. Luo, Z. Li, S. De Silva, and B. Xiao, “EIC crab cavity multipole effects on dynamic aperture”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 626-629. doi:10.18429/JACoW-IPAC2023-MOPL041
[n] S. Dutta, J. Dwivedi, A. Kumar, B. Skoczen, and H. C. Soni, “Structural Analysis of an Integrated Model of Short Straight Section, Service Module, Jumper Connection and Magnet Interconnects for the Large Hadron Collider”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF037, pp. 1684-1686.
[n] Y. W. Wu et al., “Physical Design of Electrostatic Deflector in CSNS Muon Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2360-2362. doi:10.18429/JACoW-IPAC2021-TUPAB362
[n] S. J. Park et al., “Status of PPI (Pohang Photo-Injector) for PAL XFEL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP021, pp. 1733-1735.
[n] S. De Silva et al., “Sensitivity analysis of the 197 MHz prototype crab cavity for EIC”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1749-1752. doi:10.18429/JACoW-IPAC2025-WEPB014
[n] K. Chen, L. Guo, T. He, D. He, Z. Wang, and W. Xu, “An alternative lattice for the ZIPS storage ring”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 239-241. doi:10.18429/JACoW-IPAC2025-MOPB100
[n] J. Shi et al., “Design of a constant-gradient backward-traveling-wave accelerating structure for irradiation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2426-2429. doi:10.18429/JACoW-IPAC2024-WEPG88
[n] A. Presland, B. Goddard, and W. J. M. Weterings, “The Performance of the New TCDQ System in the LHC Beam Dumping Region”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP013, pp. 1324-1326.
[n] V. Kain, B. Goddard, R. Schmidt, and J. Wenninger, “Protection Level During Extraction, Transfer and Injection into the LHC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE016, pp. 1505-1507.
[n] P. Van Trappen, E. Carlier, M. Gauthier, N. Magnin, E. J. Oltedal, and J. Schipper, “SoC Technology for Embedded Control and Interlocking Within Fast Pulsed Systems at CERN”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 593. doi:10.18429/JACoW-ICALEPCS2019-MOPHA153
[n] X. Yu, “Operation and Performance of the Beijing Electron- Positron Collider”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI022, pp. 1109-1111.
[n] H. Burkhardt, B. Goddard, Y. Kadi, V. Kain, T. Risselada, and W. J. M. Weterings, “Collimation in the Transfer Lines to the LHC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP009, pp. 1135-1137.
[n] S. Giordano and J. Votruba, “A Method of Measuring and Calculating the Longitudinal Microwave Coupling Impedance of ISABELLE”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2534-2537.
[n] F. Liu, H. B. Chen, J. Shi, C.-X. Tang, and H. Zha, “Design Of An X-band 3MeV Standing-wave Accelerating Structure with Nose-cone Structure Made From Two Halves”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1051-1053. doi:10.18429/JACoW-IPAC2021-MOPAB339
[n] S. F. Mikhailov, Y. K. Wu, and S. M. Hartman, “A Physics Based Approach for Magnet Control in a Booster and Storage Ring”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA17, pp. 553-555.
[n] H. Ishii, T. Kosuge, and H. Nitani, “The Development of Vacuum Gauge Monitoring and Control System using Web2CToolkit”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 96-98. doi:10.18429/JACoW-PCaPAC2018-WEP26
[n] V. G. Mikhailov et al., “Highly-sensitive Ionization Detectors of Accelerated Beam Parameters for Wide Use”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1743-1746.
For LaTeX
Use Complete Form
For BibTeX
References
- J. C. Herrera, E. G. Gill, and E. C. Raka, “Aperture Utilization in the AGS”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 970-973.
- D. Schulze, A. Hornung, and P. Schlick, “Progress in Electronic Frequency Control of Superconducting Helix Resonators”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3748-3751.
- L. Hu, Y. X. Qiu, and J. Zhuang, “Design and Implementation of Experimental Information Log System for CSNS”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA066, pp. XX-XX.
- B. Du, J. Pang, K. Wu, and S. Zhang, “Development of low-level RF control system for Injector of Hefei Advanced Light Facility project”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS130, unpublished.
- J. Miertusova and N. Pangos, “Insertion Device Vacuum Chamber for the ELETTRA Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP05, pp. 2045-2047.
- T. Wang, Y. He, and Z. Wang, “Research on compensation of a rf cavity failure in a superconducting linac by reinforcement learning algorithm”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper TUP12, unpublished.
- W. Gu, H. Zha, J. Shi, and H. Chen, “Using octupoles to create uniform electron beam produced by irradiation accelerators”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR59, pp. 3653-3655.
- Y. S. Qin, W. L. Chen, Y. He, Y. L. Huang, and H. Jia, “A Beam Splitting System for High Power CW Proton Beam”, presented at the 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, paper TUPB003, unpublished.
- K. Wu et al., “Upgrade of LLRF control system for infrared free-electron laser”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG47, pp. 3372-3374.
- K. Wu, B. Du, J. Pang, and S. Zhang, “Upgrade of IR-FEL low-level RF control system based on beam load feedforward”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS065, unpublished.
- Y. Zhang, E. Carideo, M. Migliorati, N. Wang, and M. Zobov, “Combined Effect of Beam-Beam Interaction and Beam Coupling Impedance in Future Circular Colliders”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 25-30.
- X. Z. Qiu, X. J. Wang, K. Batchelor, and I. Ben-Zvi, “Transition Radiation Electron Beam Diagnostic Study at ATF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPB01, pp. 2530-2532.
- J. Lewis, G. Ciovati, J. Armstrong, K. Harding, and N. Huque, “Design of a shipping fixture for a compact cryomodule hermetic assembly”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper SUP076, unpublished.
- E. Fabrici and A. Salomone, “The Extraction System for the Superconducting Cyclotron at the University of Milan”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-33, pp. 501-503.
- B. Yan et al., “Orbit alignment study in the collimation section at the European XFEL”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB037, pp. 142-145.
- M. K. Dey et al., “Beam Tuning in Kolkata Superconducting Cyclotron”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP041, pp. 132-134.
- A. C. Mezger and M. Seidel, “Control and Protection Aspects of the Megawatt Proton Accelerator at PSI”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper TUO1A04, pp. 281-285.
- I. Ben-Zvi, X. J. Wang, K. Batchelor, M. Woodle, J. Sheehan, and D. Lynch, “Design and Construction of a Full Copper Photocathode RF Gun”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3000-3003.
- S. De Silva and T. Satogata, “SRF cavities for crabbing at the Electron-Ion Collider”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THYG1, unpublished.
- J. Tong, Q. Yuan, and Y. Liu, “Control system of injection and extraction for synchrotron-based proton therapy facility”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG25, unpublished.
- K. Chen et al., “Commissioning simulation for the HALF storage ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC38, pp. 2043-2045.
- Y. X. Qiu, L. Hu, K. Zhou, and J. Zhuang, “Control Software of CSNS Multi-Purpose Reflectometer”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper MOPHA170, pp. XX-XX.
- J. Knobloch, W. Anders, and X. Yu, “Cryogenic Considerations for CW Operation of TESLA-type Superconducting Cavity Modules for the BESSY FEL”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF010, pp. 976-978.
- J. Szczesny, J. Bobnar, P. Duval, T. Kosuge, M. Lomperski, and H. Wu, “ACOP.?áNET : Not Just Another GUI Builder”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 139-143.
- Q. Wu, Y. Luo, Z. Li, S. De Silva, and B. Xiao, “EIC crab cavity multipole effects on dynamic aperture”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL041, pp. 626-629.
- S. Dutta, J. Dwivedi, A. Kumar, B. Skoczen, and H. C. Soni, “Structural Analysis of an Integrated Model of Short Straight Section, Service Module, Jumper Connection and Magnet Interconnects for the Large Hadron Collider”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF037, pp. 1684-1686.
- Y. W. Wu et al., “Physical Design of Electrostatic Deflector in CSNS Muon Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2360-2362.
- S. J. Park et al., “Status of PPI (Pohang Photo-Injector) for PAL XFEL”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP021, pp. 1733-1735.
- S. De Silva et al., “Sensitivity analysis of the 197 MHz prototype crab cavity for EIC”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB014, pp. 1749-1752.
- K. Chen, L. Guo, T. He, D. He, Z. Wang, and W. Xu, “An alternative lattice for the ZIPS storage ring”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB100, pp. 239-241.
- J. Shi et al., “Design of a constant-gradient backward-traveling-wave accelerating structure for irradiation”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG88, pp. 2426-2429.
- A. Presland, B. Goddard, and W. J. M. Weterings, “The Performance of the New TCDQ System in the LHC Beam Dumping Region”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP013, pp. 1324-1326.
- V. Kain, B. Goddard, R. Schmidt, and J. Wenninger, “Protection Level During Extraction, Transfer and Injection into the LHC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE016, pp. 1505-1507.
- P. Van Trappen, E. Carlier, M. Gauthier, N. Magnin, E. J. Oltedal, and J. Schipper, “SoC Technology for Embedded Control and Interlocking Within Fast Pulsed Systems at CERN”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 593.
- X. Yu, “Operation and Performance of the Beijing Electron- Positron Collider”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI022, pp. 1109-1111.
- H. Burkhardt, B. Goddard, Y. Kadi, V. Kain, T. Risselada, and W. J. M. Weterings, “Collimation in the Transfer Lines to the LHC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP009, pp. 1135-1137.
- S. Giordano and J. Votruba, “A Method of Measuring and Calculating the Longitudinal Microwave Coupling Impedance of ISABELLE”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2534-2537.
- F. Liu, H. B. Chen, J. Shi, C.-X. Tang, and H. Zha, “Design Of An X-band 3MeV Standing-wave Accelerating Structure with Nose-cone Structure Made From Two Halves”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1051-1053.
- S. F. Mikhailov, Y. K. Wu, and S. M. Hartman, “A Physics Based Approach for Magnet Control in a Booster and Storage Ring”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA17, pp. 553-555.
- H. Ishii, T. Kosuge, and H. Nitani, “The Development of Vacuum Gauge Monitoring and Control System using Web2CToolkit”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 96-98.
- V. G. Mikhailov et al., “Highly-sensitive Ionization Detectors of Accelerated Beam Parameters for Wide Use”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1743-1746.
Back to search