Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Kamiya, N. Nakamura, and M. Satoh, “A New COD Correction Method For Orbit Feedback”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP23F, pp. 1723-1725.
[n] M. Popovic et al., “Development and Testing of High Power CW 1497 MHz Magnetron”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1351-1353. doi:10.18429/JACoW-IPAC2022-TUPOTK058
[n] S. Seletskiy, N. Solyak, P. Tenenbaum, and D. R. Walz, “Design of the ILC RTML Extraction Lines”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP102, pp. 2752-2754.
[n] A. H. Lumpkin, T. Toellner, B. X. Yang, and C. Y. Yao, “Bunch Purity Evolution during APS Storage Ring Top-up Operations”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB002, pp. 2411-2413.
[n] M. Syha, U. Ratzinger, and M. Schuett, “Beam Dynamics for the FAIR p-Linac Ladder RFQ”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 522-524. doi:10.18429/JACoW-LINAC2018-TUPO083
[n] J. M. Potter, “An RF Power Manifold for the Radio Frequency Quadrupole Linear Accelerator”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S3-2, pp. 138-143.
[n] A. Khalilzadeh, M. Akbari, M. Jafarzadeh, and J. Rahighi, “Conceptual Design of Vacuum Control System for ILSF”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1732-1733. doi:10.18429/JACoW-ICALEPCS2017-THPHA147
[n] A. Romanov et al., “Commissioning of the IOTA proton injector”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPR32, unpublished.
[n] P. Emma, P. R. Burchat, T. H. Fieguth, T. Lohse, and R. S. Panvini, “Online Monitoring of Dispersion Functions and Transfer Matrices at the SLC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1599-1602.
[n] V. A. Dolgashev et al., “Status of X-band Standing Wave Structure Studies at SLAC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB031, pp. 1264-1266.
[n] X. Du, L. Groening, S. Mickat, and A. Seibel, “Alvarez DTL Cavity Design for the UNLAC Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2786-2788. doi:10.18429/JACoW-IPAC2015-WEPMA017
[n] V. E. Hart, E. D. Bush, and S. A. Schilling, “Mechanical Design of the LAMPF Medium Resolution Spectrometer and CEBAF Short Orbit Spectrometer Magnets”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-46, pp. 172-174.
[n] P. I. Reinhardt-Nickoulin, A. Feschenko, S. A. Gavrilov, and I. V. Vasilyev, “Distortions of Proton Beam 2-D Images and Profiles due to Beam Space Charge”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA034, pp. 116-118.
[n] J. R. Delayen and S. U. De Silva, “Design of Superconducting Parallel-bar Deflecting/Crabbing Cavities”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC120, pp. 361-363.
[n] M. W. U. Van Dijk et al., “The K12 Beamline for the KLEVER Experiment”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3726-3729. doi:10.18429/JACoW-IPAC2019-THPGW061
[n] J. M. Schippers and H. H. Kiewiet, “A Beam Profile Monitor Using the Ionization of Residual Gas”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXD-03, pp. 477-478.
[n] S. Sampayan, G. Caporaso, D. Trimble, and G. Westenskow, “Emission, Plasma Formation, and Brightness of a PZT Ferroelectric Cathode”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPE14, pp. 899-901.
[n] P. Gladkikh, I. Karnaukhov, A. Mytsykov, and A. Shcherbakov, “The Injection System for the ISI-800 Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP086G, pp. 2450-2452.
[n] W. M. Pan et al., “High Power Conditioning of the Input Coupler for BEPCII Superconductor Cavity”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP09, pp. XX-XX.
[n] J. Martínez Samblas, E. Calvo Giraldo, M. Gonzalez-Berges, and M. Krupa, “Python Expert Applications for Large Beam Instrumentation Systems at CERN”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1460-1464. doi:10.18429/JACoW-ICALEPCS2023-THPDP061
[n] J. B. Jeanneret and H.-H. Braun, “Optimisation of a Beam Transfer FODO Line”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC017, pp. 3014-3016.
[n] R. L. Ives, W. Lawson, J. Neilson, and M. E. Read, “Design of a 10 MW, 91.392 GHz Gyroklystron for Advanced Accelerators”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3A20, pp. 2081-2083.
[n] B. P. Murin, B. B. Bondarev, A. P. Durkin, G. T. Nikolaishvilli, T. N. Tsygankova, and O. Yu. Shlygin, “A Computing Optimization System for Ion Linac Accelerating/Focusing Channels”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-45, pp. 734-736.
[n] V. E. Scarpine et al., “The Fermilab HINS Test Facility and Beam Measurements of the Ion Source and 325 MHz RFQ”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUOA03, pp. 283-285.
[n] M. L. Neubauer et al., “Innovative Magnetron Power Sources for Superconducting RF (SRF) Accelerators”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1348-1350. doi:10.18429/JACoW-IPAC2022-TUPOTK057
[n] Y. Kim, K. Floettmann, T. Limberg, M. Dohlus, and D. Son, “New Linac Layout for TESLA XFEL Project”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP20012C, pp. XX-XX.
[n] W. Sulaiman Khail, M. Ries, and P. Schnitzer, “Developing a Digital Twin for BESSY II Synchrotron Light Source Based on EPICS and Microservice Design”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1594-1599. doi:10.18429/JACoW-ICALEPCS2023-THSDSC06
[n] A. Yamamoto et al., “Fabrication of an X-band 30 cm Accelerating Structure by Diffusion Brazing”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2182-2185.
[n] J. Barnard and M. Lund, “Theory of Longitudinal Beam Halo in RF Linacs: I. Core/Test-Particle Formulation”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V018, pp. 1929-1931.
[n] J. Haimson, B. Mecklenburg, and V. Valencia, “A Wide Dynamic Range 10 MeV High Current Electron Linear Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1303-1307.
[n] S. Dobrovolsky and N. F. Shul, “Transition and Diffraction Radiation by Relativistic Electrons in a Pre-Wave-Zone”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI107, pp. 1867-1869.
[n] C. Jamet, T. A. Andr?®, C. Doutresssoulles, W. Le Coz, and E. Swartvagher, “Phase and Amplitude Measurements for the SPIRAL2 Accelerator”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD17, pp. 327-329.
[n] K. Abrahamsson et al., “Performance of CRYRING with Improved Electron Cooling”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 380-385.
[n] A. R. D. Rodrigues et al., “Sirius Status Report”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2811-2814. doi:10.18429/JACoW-IPAC2016-WEPOW001
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Kamiya, N. Nakamura, and M. Satoh, “A New COD Correction Method For Orbit Feedback”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP23F, pp. 1723-1725.
- M. Popovic et al., “Development and Testing of High Power CW 1497 MHz Magnetron”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1351-1353.
- S. Seletskiy, N. Solyak, P. Tenenbaum, and D. R. Walz, “Design of the ILC RTML Extraction Lines”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP102, pp. 2752-2754.
- A. H. Lumpkin, T. Toellner, B. X. Yang, and C. Y. Yao, “Bunch Purity Evolution during APS Storage Ring Top-up Operations”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB002, pp. 2411-2413.
- M. Syha, U. Ratzinger, and M. Schuett, “Beam Dynamics for the FAIR p-Linac Ladder RFQ”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 522-524.
- J. M. Potter, “An RF Power Manifold for the Radio Frequency Quadrupole Linear Accelerator”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S3-2, pp. 138-143.
- A. Khalilzadeh, M. Akbari, M. Jafarzadeh, and J. Rahighi, “Conceptual Design of Vacuum Control System for ILSF”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1732-1733.
- A. Romanov et al., “Commissioning of the IOTA proton injector”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR32, unpublished.
- P. Emma, P. R. Burchat, T. H. Fieguth, T. Lohse, and R. S. Panvini, “Online Monitoring of Dispersion Functions and Transfer Matrices at the SLC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1599-1602.
- V. A. Dolgashev et al., “Status of X-band Standing Wave Structure Studies at SLAC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB031, pp. 1264-1266.
- X. Du, L. Groening, S. Mickat, and A. Seibel, “Alvarez DTL Cavity Design for the UNLAC Upgrade”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2786-2788.
- V. E. Hart, E. D. Bush, and S. A. Schilling, “Mechanical Design of the LAMPF Medium Resolution Spectrometer and CEBAF Short Orbit Spectrometer Magnets”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-46, pp. 172-174.
- P. I. Reinhardt-Nickoulin, A. Feschenko, S. A. Gavrilov, and I. V. Vasilyev, “Distortions of Proton Beam 2-D Images and Profiles due to Beam Space Charge”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUPSA034, pp. 116-118.
- J. R. Delayen and S. U. De Silva, “Design of Superconducting Parallel-bar Deflecting/Crabbing Cavities”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC120, pp. 361-363.
- M. W. U. Van Dijk et al., “The K12 Beamline for the KLEVER Experiment”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3726-3729.
- J. M. Schippers and H. H. Kiewiet, “A Beam Profile Monitor Using the Ionization of Residual Gas”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXD-03, pp. 477-478.
- S. Sampayan, G. Caporaso, D. Trimble, and G. Westenskow, “Emission, Plasma Formation, and Brightness of a PZT Ferroelectric Cathode”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPE14, pp. 899-901.
- P. Gladkikh, I. Karnaukhov, A. Mytsykov, and A. Shcherbakov, “The Injection System for the ISI-800 Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP086G, pp. 2450-2452.
- W. M. Pan et al., “High Power Conditioning of the Input Coupler for BEPCII Superconductor Cavity”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP09, pp. XX-XX.
- J. Martínez Samblas, E. Calvo Giraldo, M. Gonzalez-Berges, and M. Krupa, “Python Expert Applications for Large Beam Instrumentation Systems at CERN”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP061, pp. 1460-1464.
- J. B. Jeanneret and H.-H. Braun, “Optimisation of a Beam Transfer FODO Line”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC017, pp. 3014-3016.
- R. L. Ives, W. Lawson, J. Neilson, and M. E. Read, “Design of a 10 MW, 91.392 GHz Gyroklystron for Advanced Accelerators”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3A20, pp. 2081-2083.
- B. P. Murin, B. B. Bondarev, A. P. Durkin, G. T. Nikolaishvilli, T. N. Tsygankova, and O. Yu. Shlygin, “A Computing Optimization System for Ion Linac Accelerating/Focusing Channels”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-45, pp. 734-736.
- V. E. Scarpine et al., “The Fermilab HINS Test Facility and Beam Measurements of the Ion Source and 325 MHz RFQ”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUOA03, pp. 283-285.
- M. L. Neubauer et al., “Innovative Magnetron Power Sources for Superconducting RF (SRF) Accelerators”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1348-1350.
- Y. Kim, K. Floettmann, T. Limberg, M. Dohlus, and D. Son, “New Linac Layout for TESLA XFEL Project”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP20012C, pp. XX-XX.
- W. Sulaiman Khail, M. Ries, and P. Schnitzer, “Developing a Digital Twin for BESSY II Synchrotron Light Source Based on EPICS and Microservice Design”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THSDSC06, pp. 1594-1599.
- A. Yamamoto et al., “Fabrication of an X-band 30 cm Accelerating Structure by Diffusion Brazing”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2182-2185.
- J. Barnard and M. Lund, “Theory of Longitudinal Beam Halo in RF Linacs: I. Core/Test-Particle Formulation”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9V018, pp. 1929-1931.
- J. Haimson, B. Mecklenburg, and V. Valencia, “A Wide Dynamic Range 10 MeV High Current Electron Linear Accelerator”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1303-1307.
- S. Dobrovolsky and N. F. Shul, “Transition and Diffraction Radiation by Relativistic Electrons in a Pre-Wave-Zone”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI107, pp. 1867-1869.
- C. Jamet, T. A. Andr?®, C. Doutresssoulles, W. Le Coz, and E. Swartvagher, “Phase and Amplitude Measurements for the SPIRAL2 Accelerator”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD17, pp. 327-329.
- K. Abrahamsson et al., “Performance of CRYRING with Improved Electron Cooling”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 380-385.
- A. R. D. Rodrigues et al., “Sirius Status Report”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2811-2814.
Back to search