Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. H. Kuo, J. Chen, P. C. Chiu, K. T. Hsu, and K. H. Hu, “Orbit Feedback in Taiwan Light Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP064, pp. 785-787.
[n] A. Mosnier et al., “Superconducting RF Development at Saclay for a 2-4 Ge V Electron Facility”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 863-865.
[n] W. T. Roybal, D. E. Rees, H. L. Borchert, M. McCarthy, and L. Toole, “LEDA RF Distribution System Design and Component Test Results”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4076, pp. 947-949.
[n] K. J. Ruisard, G. A. Hine, T. W. Koeth, and A. J. Rosenberg, “The Rutgers Cyclotron: Placing Student's Careers on Target”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WE1PB02, pp. 291-295.
[n] S. Dastan, S. Livinov, J. Rahighi, R. Saffari, and M. Steck, “The ESR Closed Orbit Calculation and Simulation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3349-3351. doi:10.18429/JACoW-IPAC2019-WEPTS100
[n] M. G. Abbott and T. M. Cobb, “An EPICS IOC Builder”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU032, pp. 506-509.
[n] P. Datte et al., “Electrical Design Considerations for a 40MHz Gas Ionization Chamber”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH046, pp. 1327-1329.
[n] R. Thornton, G. Dale, J. Lewellen, and K. Bishofberger, “A test stand for LAMP, the LANSCE accelerator modernization project”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper MOZD03, unpublished.
[n] J. Graber et al., “High Peak Power RF Processing Studies of 3 GHz Niobium Cavities”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F19, pp. XX-XX.
[n] K. Ozeki, Y. Higurashi, T. Nakagawa, and J. Ohnishi, “Design of new 18 GHz ECR for RIKEN RIBF”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper WEZO02, pp. 114-116.
[n] H. Jeevakhan, P. K. Purohit, and G. Mishra, “Influence of Horizantal Constant Magnetic Field on Harmonic Undulator Radiations and Gain”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 34-37. doi:10.18429/JACoW-FEL2015-MOP004
[n] M. J. Furseman et al., “Adopting and Adapting Control System Studio at Diamond Light Source”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1032-1035. doi:10.18429/JACoW-ICALEPCS2015-WEPGF137
[n] J. Friedl, “DELTA, The Dortmund Electron Test Storage Ring Accelerator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 463-466.
[n] T. Kasuga, M. Hasumoto, T. Kinoshita, and H. Yonehara, “Vacuum System for UVSOR Storage Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1672-1675.
[n] F. Koechlin, “Electrostatic Septum in a High Intensity Electron Accelerator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1890-1893.
[n] Y. G. Song, J. H. Kim, Y.-S. Cho, and H.-J. Kwon, “Development of Web-based User Interface for Beam Status Monitoring of 100-MeV Proton Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2389-2391. doi:10.18429/JACoW-IPAC2016-WEPMR050
[n] C. Gardner, Y. Y. Lee, N. Tsoupas, and J. Wei, “FODO/Doublet Lattice for the SNS Accumulator Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B12, pp. 978-980.
[n] Z. Li, K. L. Bane, R. H. Miller, T. O. Raubenheimer, R. D. Ruth, and J. Wang, “Traveling Wave Structure Optimization for the NLC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH061, pp. 3816-3818.
[n] F. Furuta et al., “Performance of the Novel Cornell ERL Main Linac Prototype Cryomodule”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 492-495. doi:10.18429/JACoW-LINAC2016-TUPLR011
[n] S. Schaffner and T. Larrieu, “A Relational Database Model for Managing Accelerator Control System Software At Jefferson Lab”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP074, pp. XX-XX.
[n] E. Schulz et al., “Engineering Solutions for the Electro-polishing of Multi-cell Superconducting Accelerator Structures”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT010, pp. XX-XX.
[n] C. Widmann et al., “Beam Transport System from a Laser Wakefield Accelerator to a Transverse Gradient Undulator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2803-2806. doi:10.18429/JACoW-IPAC2014-THOBA03
[n] M. J. Barnes, L. Ducimeti?¿re, and J. A. Uythoven, “CLIC Pre-Damping and Damping Ring Kickers: Initial Ideas to Achieve Stability Requirements”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD089, pp. 3305-3307.
[n] S. Ninomiya, T. Saito, H. Tamura, and K. Sato, “RCNP Techniques for Producing Ultra-Precise Beams”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper F-3, pp. XX-XX.
[n] A. Bixio, L. Ghirlanda, and F. Terzi, “Design, Manufacture and Testing of DAPhiNE Transfer Lines Magnets at Ansaldo GIE. Part I - Linac Beam Diagnostic Branch”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2229-2232.
For LaTeX
Use Complete Form
For BibTeX
References
- C. H. Kuo, J. Chen, P. C. Chiu, K. T. Hsu, and K. H. Hu, “Orbit Feedback in Taiwan Light Source”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP064, pp. 785-787.
- A. Mosnier et al., “Superconducting RF Development at Saclay for a 2-4 Ge V Electron Facility”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 863-865.
- W. T. Roybal, D. E. Rees, H. L. Borchert, M. McCarthy, and L. Toole, “LEDA RF Distribution System Design and Component Test Results”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4076, pp. 947-949.
- K. J. Ruisard, G. A. Hine, T. W. Koeth, and A. J. Rosenberg, “The Rutgers Cyclotron: Placing Student's Careers on Target”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WE1PB02, pp. 291-295.
- S. Dastan, S. Livinov, J. Rahighi, R. Saffari, and M. Steck, “The ESR Closed Orbit Calculation and Simulation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3349-3351.
- M. G. Abbott and T. M. Cobb, “An EPICS IOC Builder”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU032, pp. 506-509.
- P. Datte et al., “Electrical Design Considerations for a 40MHz Gas Ionization Chamber”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH046, pp. 1327-1329.
- R. Thornton, G. Dale, J. Lewellen, and K. Bishofberger, “A test stand for LAMP, the LANSCE accelerator modernization project”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper MOZD03, unpublished.
- J. Graber et al., “High Peak Power RF Processing Studies of 3 GHz Niobium Cavities”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91F19, pp. XX-XX.
- K. Ozeki, Y. Higurashi, T. Nakagawa, and J. Ohnishi, “Design of new 18 GHz ECR for RIKEN RIBF”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper WEZO02, pp. 114-116.
- H. Jeevakhan, P. K. Purohit, and G. Mishra, “Influence of Horizantal Constant Magnetic Field on Harmonic Undulator Radiations and Gain”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 34-37.
- M. J. Furseman et al., “Adopting and Adapting Control System Studio at Diamond Light Source”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1032-1035.
- J. Friedl, “DELTA, The Dortmund Electron Test Storage Ring Accelerator”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 463-466.
- T. Kasuga, M. Hasumoto, T. Kinoshita, and H. Yonehara, “Vacuum System for UVSOR Storage Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1672-1675.
- F. Koechlin, “Electrostatic Septum in a High Intensity Electron Accelerator”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1890-1893.
- Y. G. Song, J. H. Kim, Y.-S. Cho, and H.-J. Kwon, “Development of Web-based User Interface for Beam Status Monitoring of 100-MeV Proton Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2389-2391.
- C. Gardner, Y. Y. Lee, N. Tsoupas, and J. Wei, “FODO/Doublet Lattice for the SNS Accumulator Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2B12, pp. 978-980.
- Z. Li, K. L. Bane, R. H. Miller, T. O. Raubenheimer, R. D. Ruth, and J. Wang, “Traveling Wave Structure Optimization for the NLC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH061, pp. 3816-3818.
- F. Furuta et al., “Performance of the Novel Cornell ERL Main Linac Prototype Cryomodule”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 492-495.
- S. Schaffner and T. Larrieu, “A Relational Database Model for Managing Accelerator Control System Software At Jefferson Lab”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP074, pp. XX-XX.
- E. Schulz et al., “Engineering Solutions for the Electro-polishing of Multi-cell Superconducting Accelerator Structures”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT010, pp. XX-XX.
- C. Widmann et al., “Beam Transport System from a Laser Wakefield Accelerator to a Transverse Gradient Undulator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2803-2806.
- M. J. Barnes, L. Ducimeti?¿re, and J. A. Uythoven, “CLIC Pre-Damping and Damping Ring Kickers: Initial Ideas to Achieve Stability Requirements”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD089, pp. 3305-3307.
- S. Ninomiya, T. Saito, H. Tamura, and K. Sato, “RCNP Techniques for Producing Ultra-Precise Beams”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper F-3, pp. XX-XX.
- A. Bixio, L. Ghirlanda, and F. Terzi, “Design, Manufacture and Testing of DAPhiNE Transfer Lines Magnets at Ansaldo GIE. Part I - Linac Beam Diagnostic Branch”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2229-2232.
Back to search