Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Ge et al., “Frequency Tuner Development at Cornell for the RAON Half-Wave-Resonator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1134-1137. doi:10.18429/JACoW-IPAC2017-MOPVA121
[n] G. A. Fatkin, A. M. Batrakov, I. V. Ilyin, and M. Yu. Vasilyev, “Control System of RF Stations for NICA Booster”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 270-273. doi:10.18429/JACoW-ICALEPCS2015-MOPGF080
[n] F.-J. Decker et al., “A Demonstration of Multi-bunch Operation in the LCLS”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB33, pp. 467-470.
[n] M. Bai et al., “First Polarized Proton Collisions at a Beam Energy of 250 GeV in RHIC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO4RAC04, pp. 91-93.
[n] K. S. B. Li et al., “Code Development for Collective Effects”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 362-367. doi:10.18429/JACoW-HB2016-WEAM3X01
[n] J. L. Brito Neto, G. B. M. Bruno, S. R. Marques, L. M. Russo, and D. O. Tavares, “A MicroTCA.4 Timing Receiver for the Sirius Timing System”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 375-378. doi:10.18429/JACoW-IBIC2018-WEPA01
[n] T. Kozawa et al., “ISIR Subpicosecond Pulse Radiolysis System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP151, pp. 2596-2598.
[n] K. P. Wootton et al., “Resonant Spin Depolarisation Measurements at the SPEAR3 Electron Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR001, pp. 771-773.
[n] T. L. Collins et al., “Progress Report on the POPAE Design Study”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1411-1416.
[n] I. Marneris et al., “Pulsing a 4.1 MW Motor Generator System to 34 MW Peak Power under Constant Input Power Operation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA163, pp. 3767-3769.
[n] J. Norem and A. Hassanein, “A Laser Strain Gauge for Accelerator Targets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH121, pp. 1494-1495.
[n] M. Lonza et al., “Implementation and Operation of the Elettra Booster Control System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP009, pp. 1544-1546.
[n] I. Romera and M. Audrain, “Pre-Operation, During Operation and Post-Operational Verification of Protection Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU016, pp. 1090-1092.
[n] M. Yu. Vasilyev, A. M. Batrakov, G. A. Fatkin, S. S. Serednyakov, and A. A. Volkov, “Upgrade of Quench Recording System for Multipole Superconducting Wigglers at BINP”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 369-371. doi:10.18429/JACoW-RUPAC2018-WEPSB45
[n] A. Ramirez and D. Stratakis, “Measurement and Analysis of Beam Phase-space Distributions for the Fermilab Muon Campus accelerator complex”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 810-813. doi:10.18429/JACoW-IPAC2019-MOPRB105
[n] L. Pivetta, A. I. Bogani, and R. Passuello, “Flop: Customizing Yocto Project for MVMExxxx PowerPC and BeagleBone ARM”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 958-961. doi:10.18429/JACoW-ICALEPCS2015-WEPGF112
[n] A. Adraktas, M. J. Barnes, H. A. Day, and L. Ducimeti?¿re, “High Voltage Performance of Surface Coatings on Alumina Insulators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3603-3606. doi:10.18429/JACoW-IPAC2016-THPMW028
[n] E. A. Hughes, “Theoretical and Observed Behaviour of the Daresbury SRS RF System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3478-3481.
[n] S. Reiche, C. Joshi, C. Pellegrini, J. B. Rosenzweig, G. Shvets, and S. Tochitsky, “Feasibility Study of a Beat-Wave Seeded THz FEL at the Neptune Laboratory”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THOA003, pp. XX-XX.
[n] N. Li, F. Huang, and H. Qu, “RESOLUTIONS OF PROBLEMS THAT OCCURRED IN SPEAR3 MAGNET”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT003, pp. 838-840.
[n] G. B. M. Bruno et al., “Open Hardware Experience on LNLS' Beam Diagnostics”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 75-79. doi:10.18429/JACoW-PCAPAC2016-THHWPLCO04
[n] A. Vikentjev and S. Poluektov, “Informational and Analytical Route Safety Estimation and Risk Calculation System for Dangerous Object Transportation”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_033.
[n] T. C. Katsouleas et al., “Positron Beam Propagation in a Meter Long Plasma Channel”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAB011, pp. 731-733.
[n] A. Hassanein, I. Konkashbaev, and J. Norem, “Thermoelastic Response of Suddenly Heated Liquid Targets in High-Power Colliders”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH071, pp. 3009-3011.
[n] H. Hsieh, M. Modena, M. A. Preger, C. Sanelli, and S. Vescovi, “The 1.8 Tesla Wiggler for the Main Rings of DAPhiNE, the Frascati Phi-Factory”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2247-2250.
[n] C. K. Sung, E.-S. Kim, S. Lee, and I. Shin, “Development of RF Conditioning System for RISP RF Power Couplers”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2211-2213. doi:10.18429/JACoW-IPAC2016-WEPMB044
For LaTeX
Use Complete Form
For BibTeX
References
- M. Ge et al., “Frequency Tuner Development at Cornell for the RAON Half-Wave-Resonator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1134-1137.
- G. A. Fatkin, A. M. Batrakov, I. V. Ilyin, and M. Yu. Vasilyev, “Control System of RF Stations for NICA Booster”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 270-273.
- F.-J. Decker et al., “A Demonstration of Multi-bunch Operation in the LCLS”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB33, pp. 467-470.
- M. Bai et al., “First Polarized Proton Collisions at a Beam Energy of 250 GeV in RHIC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO4RAC04, pp. 91-93.
- K. S. B. Li et al., “Code Development for Collective Effects”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 362-367.
- J. L. Brito Neto, G. B. M. Bruno, S. R. Marques, L. M. Russo, and D. O. Tavares, “A MicroTCA.4 Timing Receiver for the Sirius Timing System”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 375-378.
- T. Kozawa et al., “ISIR Subpicosecond Pulse Radiolysis System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP151, pp. 2596-2598.
- K. P. Wootton et al., “Resonant Spin Depolarisation Measurements at the SPEAR3 Electron Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR001, pp. 771-773.
- T. L. Collins et al., “Progress Report on the POPAE Design Study”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1411-1416.
- I. Marneris et al., “Pulsing a 4.1 MW Motor Generator System to 34 MW Peak Power under Constant Input Power Operation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA163, pp. 3767-3769.
- J. Norem and A. Hassanein, “A Laser Strain Gauge for Accelerator Targets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH121, pp. 1494-1495.
- M. Lonza et al., “Implementation and Operation of the Elettra Booster Control System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP009, pp. 1544-1546.
- I. Romera and M. Audrain, “Pre-Operation, During Operation and Post-Operational Verification of Protection Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU016, pp. 1090-1092.
- M. Yu. Vasilyev, A. M. Batrakov, G. A. Fatkin, S. S. Serednyakov, and A. A. Volkov, “Upgrade of Quench Recording System for Multipole Superconducting Wigglers at BINP”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 369-371.
- A. Ramirez and D. Stratakis, “Measurement and Analysis of Beam Phase-space Distributions for the Fermilab Muon Campus accelerator complex”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 810-813.
- L. Pivetta, A. I. Bogani, and R. Passuello, “Flop: Customizing Yocto Project for MVMExxxx PowerPC and BeagleBone ARM”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 958-961.
- A. Adraktas, M. J. Barnes, H. A. Day, and L. Ducimeti?¿re, “High Voltage Performance of Surface Coatings on Alumina Insulators”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3603-3606.
- E. A. Hughes, “Theoretical and Observed Behaviour of the Daresbury SRS RF System”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3478-3481.
- S. Reiche, C. Joshi, C. Pellegrini, J. B. Rosenzweig, G. Shvets, and S. Tochitsky, “Feasibility Study of a Beat-Wave Seeded THz FEL at the Neptune Laboratory”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THOA003, pp. XX-XX.
- N. Li, F. Huang, and H. Qu, “RESOLUTIONS OF PROBLEMS THAT OCCURRED IN SPEAR3 MAGNET”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT003, pp. 838-840.
- G. B. M. Bruno et al., “Open Hardware Experience on LNLS' Beam Diagnostics”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 75-79.
- A. Vikentjev and S. Poluektov, “Informational and Analytical Route Safety Estimation and Risk Calculation System for Dangerous Object Transportation”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_033.
- T. C. Katsouleas et al., “Positron Beam Propagation in a Meter Long Plasma Channel”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FOAB011, pp. 731-733.
- A. Hassanein, I. Konkashbaev, and J. Norem, “Thermoelastic Response of Suddenly Heated Liquid Targets in High-Power Colliders”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH071, pp. 3009-3011.
- H. Hsieh, M. Modena, M. A. Preger, C. Sanelli, and S. Vescovi, “The 1.8 Tesla Wiggler for the Main Rings of DAPhiNE, the Frascati Phi-Factory”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2247-2250.
- C. K. Sung, E.-S. Kim, S. Lee, and I. Shin, “Development of RF Conditioning System for RISP RF Power Couplers”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2211-2213.
Back to search