Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Q. Tura, C. Berthe, O. Danna, M. Faye, A. Savalle, and J. Suadeau, “Safety Control of the Spiral2 Radioactive Gas Storage System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1629-1633. doi:10.18429/JACoW-ICALEPCS2017-THPHA107
[n] A. Degiovanni et al., “Emittance Measurements at the Strasbourg TR24 Cyclotron for the Addition of a 65 MeV Linac Booster”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT005, pp. 329-331.
[n] J.-L. Fernandez-Hernando and D. Angal-Kalinin, “Beam Dump and Collimation Design Studies for NLS: Thermal and Structural Behaviour”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC037, pp. 1805-1807.
[n] J. Sikora, M. Billing, G. Codner, R. Meller, C. Strohman, and T. Pelaia, “Longitudinal Feedback at CESR”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA19, pp. 1115-1117.
[n] V. Gettmann et al., “Preparation for the Advanced Demonstrator Testing at GSI”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 698-700. doi:10.18429/JACoW-SRF2019-TUP098
[n] F. L. Long, Z. L. Wu, X. Z. Wei, and J. Cheng, “UPGRADE OF THE BEPC STORAGE RING MAGNET TEMPERATURE PROTECTION SYSTEM”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP036, pp. XX-XX.
[n] J. T. M. Chrin, M. Aiba, and J. Snuverink, “A Channel Access Software Platform for Beam Dynamics Applications in Scripting Languages”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2661-2664. doi:10.18429/JACoW-IPAC2019-WEPGW079
[n] W. V. Hassenzahl, W. C. Armstrong, and J. D. Rogers, “The Effects of Radiation on Superconducting Nb-Ti Wire”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 683-685.
[n] D. Gough, D. Brodzik, A. Faltens, C. Pike, and J. Stoker, “Pulsers for the Induction Linac Experiment, MBE-4”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 954-957.
[n] W. K. Lau et al., “Development of a High Brightness Photo-Injector for Light Source Research at NSRRC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC071, pp. 229-231.
[n] N. Pupeter et al., “Influence of Surface Roughness and Preparation, Bulk Purity and Heat Treatment on Electron Field Emission from Nb and Nb3Sn”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95B01, pp. 67-77.
[n] S. Adam, “New Proofs for Old Facts in Acceleration Theory”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-16, pp. 431-433.
[n] C. Gonzalez-Ortiz, P. Ostroumov, and R. Ainsworth, “Optimizing the sextupole configuration for simultaneous correction of third order resonances at the recycler ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 736-739. doi:10.18429/JACoW-IPAC2024-MOPS16
[n] C. M. Chu, J. Galambos, J. Wei, C. K. Allen, and P. McGehee, “SNS Application Programming Plan”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP060, pp. XX-XX.
[n] N. Barov, J. S. Kim, R. H. Miller, and D. J. Newsham, “Novel Acceleration Structure Using Slot Resonance Coupling”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP014, pp. 839-841.
[n] U. Amaldi et al., “Study, Construction and Test of a 3 GHz Linac-Booster LIBO for Cancer Therapy”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A13, pp. 2495-2497.
[n] S. F. Mikhailov, V. N. Litvinenko, and Y. Wu, “Low Emittance Lattices for the Duke FEL Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH125, pp. 3528-3530.
[n] S. Y. Chen et al., “DESIGN OF LOW IMPEDANCE ELECTROSTATIC SEPARATORS FOR BEPC II”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP016, pp. XX-XX.
[n] R. L. Brown et al., “The STAR Detector Magnet Subsystem”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P002, pp. 3230-3232.
[n] J. F. O et al., “PSR Electron Cloud Detector and Suppressor Mechanical Design and Fabrication”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS054, pp. 4117-4119.
[n] M. H. R. Donald et al., “A Superconducting Synchrotron Design Study at the Rutherford Laboratory”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 703-707.
[n] P. Mandrillon et al., “Advances of the Feasibility Study of the European Light Ion Medical Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 767-770.
[n] P. Buaphad, S. C. Cha, and Y. Kim, “Development of 6 MeV European S-band Side-Coupled Industrial Electron Linear Accelerator at RTX & KAERI”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 478-480. doi:10.18429/JACoW-LINAC2016-TUPLR005
[n] M. Qian et al., “Design, fabrication and measurements of a quadrupole wiggler prototype”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1506-1509. doi:10.18429/JACoW-IPAC2024-TUPR42
[n] F. Dupont, “Status of the LEP e Injector Linacs”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper WED0003, pp. 288-292.
[n] J. Theilacker et al., “Fermilab Energy Saver Refrigeration System Tests”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3257-3260.
[n] A. Basti et al., “Optimization of ILC Cryomodule Design Using Explosion Welding Technology”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 913-916. doi:10.18429/JACoW-IPAC2015-MOPHA052
[n] R. L. Ives, W. Lawson, J. Neilson, and M. E. Read, “Design of a 10 MW, 91.392 GHz Gyroklystron for Advanced Accelerators”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3A20, pp. 2081-2083.
[n] L. Geoffroy, R. Sabjan, and R. Stefanic, “EPICS to TANGO Translator”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper FOPA05, pp. 739-741.
[n] W. H. Backer, C. J. A. Corsten, and H. L. Hagedoorn, “Some Aspects on Linear and Non-Linear Orbit Motion in Storage Rings”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3607-3610.
[n] S. Pissanetzky, M. Fan, G. R. Kalbfleish, and E. Whalen, “MAGNUS: A Computer Program for 3-D Magnet Design”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1678-1681.
[n] E. Trakhtenberg, B. Brajuskovic, P. Den Hartog, and G. Wiemerslage, “New Insertion Device Vacuum Chambers at the Advanced Photon Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB003, pp. 830-832.
[n] R. R. Lindberg and K.-J. Kim, “Mode Growth and Competition in the X-ray FEL Oscillator Start-up from Noise”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH013, pp. 32-35.
[n] W. B. Herrmannsfeldt, “The Magnetic Shielding System for the Stanford Two-Mile Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 929-931.
For LaTeX
Use Complete Form
For BibTeX
References
- Q. Tura, C. Berthe, O. Danna, M. Faye, A. Savalle, and J. Suadeau, “Safety Control of the Spiral2 Radioactive Gas Storage System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1629-1633.
- A. Degiovanni et al., “Emittance Measurements at the Strasbourg TR24 Cyclotron for the Addition of a 65 MeV Linac Booster”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPPT005, pp. 329-331.
- J.-L. Fernandez-Hernando and D. Angal-Kalinin, “Beam Dump and Collimation Design Studies for NLS: Thermal and Structural Behaviour”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC037, pp. 1805-1807.
- J. Sikora, M. Billing, G. Codner, R. Meller, C. Strohman, and T. Pelaia, “Longitudinal Feedback at CESR”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA19, pp. 1115-1117.
- V. Gettmann et al., “Preparation for the Advanced Demonstrator Testing at GSI”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 698-700.
- F. L. Long, Z. L. Wu, X. Z. Wei, and J. Cheng, “UPGRADE OF THE BEPC STORAGE RING MAGNET TEMPERATURE PROTECTION SYSTEM”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUP036, pp. XX-XX.
- J. T. M. Chrin, M. Aiba, and J. Snuverink, “A Channel Access Software Platform for Beam Dynamics Applications in Scripting Languages”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2661-2664.
- W. V. Hassenzahl, W. C. Armstrong, and J. D. Rogers, “The Effects of Radiation on Superconducting Nb-Ti Wire”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 683-685.
- D. Gough, D. Brodzik, A. Faltens, C. Pike, and J. Stoker, “Pulsers for the Induction Linac Experiment, MBE-4”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 954-957.
- W. K. Lau et al., “Development of a High Brightness Photo-Injector for Light Source Research at NSRRC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC071, pp. 229-231.
- N. Pupeter et al., “Influence of Surface Roughness and Preparation, Bulk Purity and Heat Treatment on Electron Field Emission from Nb and Nb3Sn”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95B01, pp. 67-77.
- S. Adam, “New Proofs for Old Facts in Acceleration Theory”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-16, pp. 431-433.
- C. Gonzalez-Ortiz, P. Ostroumov, and R. Ainsworth, “Optimizing the sextupole configuration for simultaneous correction of third order resonances at the recycler ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS16, pp. 736-739.
- C. M. Chu, J. Galambos, J. Wei, C. K. Allen, and P. McGehee, “SNS Application Programming Plan”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP060, pp. XX-XX.
- N. Barov, J. S. Kim, R. H. Miller, and D. J. Newsham, “Novel Acceleration Structure Using Slot Resonance Coupling”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP014, pp. 839-841.
- U. Amaldi et al., “Study, Construction and Test of a 3 GHz Linac-Booster LIBO for Cancer Therapy”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A13, pp. 2495-2497.
- S. F. Mikhailov, V. N. Litvinenko, and Y. Wu, “Low Emittance Lattices for the Duke FEL Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH125, pp. 3528-3530.
- S. Y. Chen et al., “DESIGN OF LOW IMPEDANCE ELECTROSTATIC SEPARATORS FOR BEPC II”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUP016, pp. XX-XX.
- R. L. Brown et al., “The STAR Detector Magnet Subsystem”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P002, pp. 3230-3232.
- J. F. O et al., “PSR Electron Cloud Detector and Suppressor Mechanical Design and Fabrication”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS054, pp. 4117-4119.
- M. H. R. Donald et al., “A Superconducting Synchrotron Design Study at the Rutherford Laboratory”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 703-707.
- P. Mandrillon et al., “Advances of the Feasibility Study of the European Light Ion Medical Accelerator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 767-770.
- P. Buaphad, S. C. Cha, and Y. Kim, “Development of 6 MeV European S-band Side-Coupled Industrial Electron Linear Accelerator at RTX & KAERI”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 478-480.
- M. Qian et al., “Design, fabrication and measurements of a quadrupole wiggler prototype”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR42, pp. 1506-1509.
- F. Dupont, “Status of the LEP e Injector Linacs”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper WED0003, pp. 288-292.
- J. Theilacker et al., “Fermilab Energy Saver Refrigeration System Tests”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3257-3260.
- A. Basti et al., “Optimization of ILC Cryomodule Design Using Explosion Welding Technology”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 913-916.
- R. L. Ives, W. Lawson, J. Neilson, and M. E. Read, “Design of a 10 MW, 91.392 GHz Gyroklystron for Advanced Accelerators”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3A20, pp. 2081-2083.
- L. Geoffroy, R. Sabjan, and R. Stefanic, “EPICS to TANGO Translator”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper FOPA05, pp. 739-741.
- W. H. Backer, C. J. A. Corsten, and H. L. Hagedoorn, “Some Aspects on Linear and Non-Linear Orbit Motion in Storage Rings”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3607-3610.
- S. Pissanetzky, M. Fan, G. R. Kalbfleish, and E. Whalen, “MAGNUS: A Computer Program for 3-D Magnet Design”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1678-1681.
- E. Trakhtenberg, B. Brajuskovic, P. Den Hartog, and G. Wiemerslage, “New Insertion Device Vacuum Chambers at the Advanced Photon Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB003, pp. 830-832.
- R. R. Lindberg and K.-J. Kim, “Mode Growth and Competition in the X-ray FEL Oscillator Start-up from Noise”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH013, pp. 32-35.
- W. B. Herrmannsfeldt, “The Magnetic Shielding System for the Stanford Two-Mile Accelerator”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 929-931.
Back to search