Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Bruno, G. Ganetis, R. F. Lambiase, and J. Sandberg, “RHIC Insertion Region, Shunt Power Supply Current Errors”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH003, pp. 3660-3662.
[n] J. Wei, “The Joy of Accelerator Physics”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPPMH02, pp. 3658-3662.
[n] G. Papotti et al., “Experience with Offset Collisions in the LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ025, pp. 1858-1860.
[n] M. A. Boronina, E. Levichev, S. A. Nikitin, V. N. Snytnikov, and V. A. Vshivkov, “3D PIC Method Development for Simulation of Beam-Beam Effects in Supercolliders”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN060, pp. 3366-3368.
[n] T. Suwada and S. Ohsawa, “Recalibration of a Wall-Current Monitor Using a Beam-Induced Field for the KEKB Injector Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D055, pp. 528-530.
[n] M. Vretenar et al., “Status and Plans for Linac4 Installation and Commissioning”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3332-3334. doi:10.18429/JACoW-IPAC2014-THPME048
[n] S. Chel, A. Mosnier, and H. Safa, “5kW RF Power Coupling Line Developments”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F15, pp. XX-XX.
[n] Y. Irie, T. Oki, and S. Takano, “Wide-Band Low-Power Driver of the Low Output-Impedance RF System for a Proton Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B04, pp. 2090-2092.
[n] J. Tanaka et al., “Construction Progress of the Photon Factory 2.5 GeV Electron Linac”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper J201, pp. 360-362.
[n] S. Fukumoto et al., “Operation of KEK Preinjector”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper D03, pp. 193-196.
[n] M. Di Giacomo et al., “Preliminary Design of the RF Systems for the SPIRAL 2 SC Linac”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT072, pp. 2017-2019.
[n] J. M. Garland, H. L. Owen, D. J. Kelliher, S. Machida, and B. D. Muratori, “Beam Dynamics Observations of Slow Integer Tune Crossing in EMMA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3082-3085. doi:10.18429/JACoW-IPAC2014-THPRO084
[n] Y. Xie et al., “Demonstration of Coaxial Coupling Scheme at 26 MV/m for 1.3 GHz Tesla-Type SRF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB105, pp. 1397-1399.
[n] C. Pai et al., “Mechanical Design of Fast Extraction Kicker and PFN for SNS Accumulator Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB049, pp. 2147-2149.
[n] M. Taborelli et al., “Breakdown Studies for the CLIC Accelerating Structures”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP070, pp. 217-219.
[n] E. Lopez Sola et al., “Beam Dump Facility Target: Design Status and Beam Tests in 2018”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2604-2607. doi:10.18429/JACoW-IPAC2018-WEPMG002
[n] F. Miyahara et al., “Development of L-Band Positron Capture Accelerating Structure with Kanthal-coated Collinear Load for SuperKEKB”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR051, pp. 1933-1935.
[n] A. van Steenbergen, “Two-Turn Extraction from an Injector Synchrotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 246-255.
[n] S. Werin, N. Cutic, M. Eriksson, F. Lindau, and S. Thorin, “The MAX IV Injector as a Soft X-Ray FEL Driver”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPA11, pp. 382-385.
[n] T. Tanaka et al., “In-Vacuum Undulators”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUOC001, pp. 370-377.
[n] J. M. Garland, J.-B. Lallement, and A. M. Lombardi, “LINAC5: A Quasi-Alvarez LINAC for BioLEIR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2385-2388. doi:10.18429/JACoW-IPAC2017-TUPVA125
[n] A. Hocker, E. R. Harms, A. Lunin, and A. I. Sukhanov, “High Power Tests of Dressed Superconducting 1.3 GHz RF Cavities”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP071, pp. 949-951.
[n] P. R. Hanley, M. R. Cleland, C. F. Mason, K. H. Morganstern, and C. C. Thompson, “The Tandem Dynamitron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 90-96.
[n] Y. Ogawa et al., “New Streak-Camera System for the KEKB Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D057, pp. 534-536.
[n] B. Hendricks, R. P. Johnson, R. Joshel, E. Martensson, and D. Siergiej, “The Tevatron Orbit Program”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1293-1296.
[n] D. R. Bett et al., “Ground Motion Compensation using Feed-forward Control at ATF2”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2670-2672. doi:10.18429/JACoW-IPAC2016-WEPOR005
[n] A. Mosnier, “SPIRAL2 : A High Intensity Deuteron and Ion Linear Accelerator for Exotic Beam Production”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPA008, pp. 595-597.
[n] W. E. Cooper et al., “Cryogenic System for Production Testing and Measurement of Fermilab Energy Saver Superconducting Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3602-3605.
[n] M. R. Cleland and P. Farrell, “Dynamitrons of the Future”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 227-235.
[n] D. Uriot, “Improvement of RF Field Phase and Amplitude Errors Simulations in TraceWin Code”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2983-2985. doi:10.18429/JACoW-IPAC2018-THPAF017
[n] F. J. C. Wenander, R. Scrivens, D. Kuchler, T. Meinschad, and M. B. Jensen, “A Proposal for Post Acceleration, Matching and Measuring the H- Ion Beam at CERN's Linac 4 Test Stand”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP042, pp. 343-345.
[n] A. Grudiev et al., “Design and Fabrication of CLIC Test Structures”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP057, pp. 533-535.
[n] S. Reiche, H.-H. Braun, Y. Kim, and M. Pedrozzi, “Low Charge Operation of SwissFEL”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC07, pp. 59-62.
[n] K. W. Zieher, B. Fishbine, S. Humphries, and D. M. Woodall, “Beam Measurements on the Electron Injector for a High Current Betatron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3274-3277.
[n] F. Albert et al., “Low Intensity Nonlinear Effects in Compton Scattering Sources”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP181, pp. 2453-2455.
[n] H. Aoyagi et al., “Improvement in High-Frequency Properties of Beam Halo Monitor Using Dimond Detectors for SPring-8 XFEL”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THOC4, pp. 700-703.
[n] N. Cutic, F. Lindau, E. Mansten, and S. Werin, “On-Line Arrival Time and Jitter Measurements Using Electro-Optical Spectral Decoding”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THOA4, pp. 548-551.
[n] R. Miyamoto et al., “Beam Commissioning of Normal Conducting Part and Status of ESS Project”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 18-24. doi:10.18429/JACoW-LINAC2022-MO1PA02
[n] S. Chel et al., “Low-Beta SC Quarter-Wave Resonator and Cryomodule for SPIRAL 2”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT053, pp. 3238-3240.
[n] E. Fagotti et al., “Upgrade of the heavy ion accelerator complex at INFN-LNL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2198-2201. doi:10.18429/JACoW-IPAC2023-TUPM004
[n] Yu. Lurie and Y. Pinhasi, “Modal Description of Longitudinal Space-Charge Fields in Pulse-Driven Free-Electron Devices”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC26, pp. 95-98.
[n] T. Takayanagi, Y. Irie, J. Kamiya, T. Kawakubo, and I. Sakai, “Design of the Pulse Bending Magnets for the Injection System of the 3-GeV RCS in J-PARC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT007, pp. 1048-1050.
[n] E. J. Minehara, M. Sugimoto, M. Sawamura, R. Nagai, and N. Kikuzawa, “Development of the JAERI FEL Driven by a Superconducting Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPG02, pp. 159-161.
[n] A. van Steenbergen, “Studies of Beam Behavior in the Energy Region of 50-400 MeV with the Brookhaven Alternating Gradient Synchrotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 641-653.
[n] R. D. Kephart, J. E. Anderson, C. A. Cooper, S. Henderson, and C. W. Schmidt, “The Illinois Accelerator Research Center”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEZB1, pp. 765-769.
[n] M. Veronese et al., “First Operation of the FERMI@Elettra Bunch Length Monitor System”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB41, pp. 486-489.
[n] G. H. Hoffstaetter et al., “CBETA, the 4-Turn ERL with SRF and Single Return Loop”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 635-639. doi:10.18429/JACoW-IPAC2018-TUYGBE2
For LaTeX
Use Complete Form
For BibTeX
References
- D. Bruno, G. Ganetis, R. F. Lambiase, and J. Sandberg, “RHIC Insertion Region, Shunt Power Supply Current Errors”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH003, pp. 3660-3662.
- J. Wei, “The Joy of Accelerator Physics”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPPMH02, pp. 3658-3662.
- G. Papotti et al., “Experience with Offset Collisions in the LHC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ025, pp. 1858-1860.
- M. A. Boronina, E. Levichev, S. A. Nikitin, V. N. Snytnikov, and V. A. Vshivkov, “3D PIC Method Development for Simulation of Beam-Beam Effects in Supercolliders”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN060, pp. 3366-3368.
- T. Suwada and S. Ohsawa, “Recalibration of a Wall-Current Monitor Using a Beam-Induced Field for the KEKB Injector Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D055, pp. 528-530.
- M. Vretenar et al., “Status and Plans for Linac4 Installation and Commissioning”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3332-3334.
- S. Chel, A. Mosnier, and H. Safa, “5kW RF Power Coupling Line Developments”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91F15, pp. XX-XX.
- Y. Irie, T. Oki, and S. Takano, “Wide-Band Low-Power Driver of the Low Output-Impedance RF System for a Proton Synchrotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4B04, pp. 2090-2092.
- J. Tanaka et al., “Construction Progress of the Photon Factory 2.5 GeV Electron Linac”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper J201, pp. 360-362.
- S. Fukumoto et al., “Operation of KEK Preinjector”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper D03, pp. 193-196.
- M. Di Giacomo et al., “Preliminary Design of the RF Systems for the SPIRAL 2 SC Linac”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT072, pp. 2017-2019.
- J. M. Garland, H. L. Owen, D. J. Kelliher, S. Machida, and B. D. Muratori, “Beam Dynamics Observations of Slow Integer Tune Crossing in EMMA”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3082-3085.
- Y. Xie et al., “Demonstration of Coaxial Coupling Scheme at 26 MV/m for 1.3 GHz Tesla-Type SRF Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB105, pp. 1397-1399.
- C. Pai et al., “Mechanical Design of Fast Extraction Kicker and PFN for SNS Accumulator Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB049, pp. 2147-2149.
- M. Taborelli et al., “Breakdown Studies for the CLIC Accelerating Structures”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP070, pp. 217-219.
- E. Lopez Sola et al., “Beam Dump Facility Target: Design Status and Beam Tests in 2018”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2604-2607.
- F. Miyahara et al., “Development of L-Band Positron Capture Accelerating Structure with Kanthal-coated Collinear Load for SuperKEKB”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR051, pp. 1933-1935.
- A. van Steenbergen, “Two-Turn Extraction from an Injector Synchrotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 246-255.
- S. Werin, N. Cutic, M. Eriksson, F. Lindau, and S. Thorin, “The MAX IV Injector as a Soft X-Ray FEL Driver”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPA11, pp. 382-385.
- T. Tanaka et al., “In-Vacuum Undulators”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUOC001, pp. 370-377.
- J. M. Garland, J.-B. Lallement, and A. M. Lombardi, “LINAC5: A Quasi-Alvarez LINAC for BioLEIR”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2385-2388.
- A. Hocker, E. R. Harms, A. Lunin, and A. I. Sukhanov, “High Power Tests of Dressed Superconducting 1.3 GHz RF Cavities”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP071, pp. 949-951.
- P. R. Hanley, M. R. Cleland, C. F. Mason, K. H. Morganstern, and C. C. Thompson, “The Tandem Dynamitron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 90-96.
- Y. Ogawa et al., “New Streak-Camera System for the KEKB Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D057, pp. 534-536.
- B. Hendricks, R. P. Johnson, R. Joshel, E. Martensson, and D. Siergiej, “The Tevatron Orbit Program”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1293-1296.
- D. R. Bett et al., “Ground Motion Compensation using Feed-forward Control at ATF2”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2670-2672.
- A. Mosnier, “SPIRAL2 : A High Intensity Deuteron and Ion Linear Accelerator for Exotic Beam Production”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPA008, pp. 595-597.
- W. E. Cooper et al., “Cryogenic System for Production Testing and Measurement of Fermilab Energy Saver Superconducting Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3602-3605.
- M. R. Cleland and P. Farrell, “Dynamitrons of the Future”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 227-235.
- D. Uriot, “Improvement of RF Field Phase and Amplitude Errors Simulations in TraceWin Code”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2983-2985.
- F. J. C. Wenander, R. Scrivens, D. Kuchler, T. Meinschad, and M. B. Jensen, “A Proposal for Post Acceleration, Matching and Measuring the H- Ion Beam at CERN's Linac 4 Test Stand”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP042, pp. 343-345.
- A. Grudiev et al., “Design and Fabrication of CLIC Test Structures”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP057, pp. 533-535.
- S. Reiche, H.-H. Braun, Y. Kim, and M. Pedrozzi, “Low Charge Operation of SwissFEL”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC07, pp. 59-62.
- K. W. Zieher, B. Fishbine, S. Humphries, and D. M. Woodall, “Beam Measurements on the Electron Injector for a High Current Betatron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3274-3277.
- F. Albert et al., “Low Intensity Nonlinear Effects in Compton Scattering Sources”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP181, pp. 2453-2455.
- H. Aoyagi et al., “Improvement in High-Frequency Properties of Beam Halo Monitor Using Dimond Detectors for SPring-8 XFEL”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THOC4, pp. 700-703.
- N. Cutic, F. Lindau, E. Mansten, and S. Werin, “On-Line Arrival Time and Jitter Measurements Using Electro-Optical Spectral Decoding”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THOA4, pp. 548-551.
- R. Miyamoto et al., “Beam Commissioning of Normal Conducting Part and Status of ESS Project”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 18-24.
- S. Chel et al., “Low-Beta SC Quarter-Wave Resonator and Cryomodule for SPIRAL 2”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT053, pp. 3238-3240.
- E. Fagotti et al., “Upgrade of the heavy ion accelerator complex at INFN-LNL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM004, pp. 2198-2201.
- Yu. Lurie and Y. Pinhasi, “Modal Description of Longitudinal Space-Charge Fields in Pulse-Driven Free-Electron Devices”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC26, pp. 95-98.
- T. Takayanagi, Y. Irie, J. Kamiya, T. Kawakubo, and I. Sakai, “Design of the Pulse Bending Magnets for the Injection System of the 3-GeV RCS in J-PARC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT007, pp. 1048-1050.
- E. J. Minehara, M. Sugimoto, M. Sawamura, R. Nagai, and N. Kikuzawa, “Development of the JAERI FEL Driven by a Superconducting Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPG02, pp. 159-161.
- A. van Steenbergen, “Studies of Beam Behavior in the Energy Region of 50-400 MeV with the Brookhaven Alternating Gradient Synchrotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 641-653.
- R. D. Kephart, J. E. Anderson, C. A. Cooper, S. Henderson, and C. W. Schmidt, “The Illinois Accelerator Research Center”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEZB1, pp. 765-769.
- M. Veronese et al., “First Operation of the FERMI@Elettra Bunch Length Monitor System”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB41, pp. 486-489.
- G. H. Hoffstaetter et al., “CBETA, the 4-Turn ERL with SRF and Single Return Loop”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 635-639.
Back to search