Favourites
For Word
[n] V. Kobets, N. Balalykin, I. N. Meshkov, V. Minashkin, G. Shirkov, and V. Shabratov, “Physical Starting of the First and Second Section of Accelerator Linac-800”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP098, pp. 288-290.
[n] S. Aumon, H. Damerau, and S. S. Gilardoni, “Optimization of the Position of the Radial Loop Pickups in the CERN PS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB042, pp. 2782-2784.
[n] C. Bloomer, G. Rehm, and C. A. Thomas, “Observation and Improvement of the Long Term Beam Stability using X-ray Beam Position Monitors at DLS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB047, pp. 2797-2799.
[n] P. Leban, G. Brajnik, and R. De Monte, “Evaluation of Pilot-Tone Calibration Based BPM System at Elettra Sincrotrone Trieste”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2638-2640. doi:10.18429/JACoW-IPAC2019-WEPGW072
[n] O. Frasciello and M. Zobov, “Numerical Calculations of Wake Fields and Impedances of LHC Collimators' Real Structures”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 178-182. doi:10.18429/JACoW-ICAP2015-FRAJI1
[n] G. Iadarola et al., “Detailed Studies of Beam Induced Scrubbing in the CERN-SPS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3908-3910. doi:10.18429/JACoW-IPAC2015-THPF091
[n] P. Amstutz et al., “Generation of short current spikes by laser modulation at FLASH”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 187-189. doi:10.18429/JACoW-IPAC2025-MOPB060
[n] K. J. Ruisard et al., “Tuning Low-Current Beam for Nonlinear Quasi-Integrable Optics Experiments at the University of Maryland Electron Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3585-3588. doi:10.18429/JACoW-IPAC2018-THPAK143
[n] J. Pasternak et al., “Accelerator and Particle Physics Research for the Next Generation Muon to Electron Conversion Experiment - the PRISM Task Force”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE056, pp. 3473-3475.
[n] N. Biancacci, L. R. Carver, G. Papotti, T. Persson, B. Salvant, and R. Tomas, “Impedance Localization Measurements using AC Dipoles in the LHC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 614-617. doi:10.18429/JACoW-IPAC2016-MOPOR011
[n] Y. Alexahin, E. Gianfelice-Wendt, and V. V. Kapin, “Effect of Field Errors in Muon Collider IR Magnets on Beam Dynamics”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC042, pp. 1257-1259.
[n] R. Stassen, F. J. Etzkorn, G. Schug, H. Stockhorst, T. Katayama, and L. Thorndahl, “RF and Stochastic Cooling System of the HESR”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD008, pp. 385-387.
[n] F. Giacuzzo et al., “Equipment and Machine Protection Systems for the FERMI@Elettra FEL facility”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU025, pp. 1119-1121.
[n] F. Hug, K. Aulenbacher, R. G. Heine, B. Ledroit, and D. Simon, “MESA - an ERL Project for Particle Physics Experiments”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 313-315. doi:10.18429/JACoW-LINAC2016-MOP106012
[n] D. J. Crawford et al., “First Beam and High-Gradient Cryomodule Commissioning Results of the Advanced Superconducting Test Accelerator at Fermilab”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1831-1833. doi:10.18429/JACoW-IPAC2015-TUPJE080
[n] B. Goddard, E. Carlier, L. Ducimeti?¿re, G. Kotzian, J. A. Uythoven, and F. M. Velotti, “SPS Injection and Beam Quality for LHC Heavy Ions With 150 ns Kicker Rise Time”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1360-1362. doi:10.18429/JACoW-IPAC2016-TUPMR048
[n] E. Jauregi et al., “High Current Switch-mode Power Converter Prototype for LHC Project 6kA, 8V”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT048, pp. 656-658.
[n] A. Almomani and U. Ratzinger, “High Gradient Room Temperature Cavity Development for 10 ÔÇô 100 AMeV Beams”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO012, pp. 3785-3787.
[n] S. Jin, X. Y. Lu, K. Zhao, R. A. Rimmer, and A. T. Wu, “Study of I-V Characteristics at Different Locations Inside a Demountable Nb SRF Cavity During Vertical BEP and EP Treatments”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO033, pp. 450-455.
[n] B. Sun, Z. Li, J. Y. Tang, and F. Yan, “Local Compensation-Rematch for Element Failures in the Low Energy Section of C-Ads Accelerator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA018, pp. 1760-1762.
[n] F. Schmidt et al., “Code Bench-Marking for Long-Term Tracking and Adaptive Algorithms”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 357-361. doi:10.18429/JACoW-HB2016-WEAM1X01
[n] A. Novokhatski, J. Seeman, and M. K. Sullivan, “A Model of an Electrical Discharge in the Flange Contacts with Omega Seals at High Currents in PEP-II”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP054, pp. 1667-1669.
For LaTeX
Use Complete Form
For BibTeX
References
- V. Kobets, N. Balalykin, I. N. Meshkov, V. Minashkin, G. Shirkov, and V. Shabratov, “Physical Starting of the First and Second Section of Accelerator Linac-800”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP098, pp. 288-290.
- S. Aumon, H. Damerau, and S. S. Gilardoni, “Optimization of the Position of the Radial Loop Pickups in the CERN PS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB042, pp. 2782-2784.
- C. Bloomer, G. Rehm, and C. A. Thomas, “Observation and Improvement of the Long Term Beam Stability using X-ray Beam Position Monitors at DLS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB047, pp. 2797-2799.
- P. Leban, G. Brajnik, and R. De Monte, “Evaluation of Pilot-Tone Calibration Based BPM System at Elettra Sincrotrone Trieste”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2638-2640.
- O. Frasciello and M. Zobov, “Numerical Calculations of Wake Fields and Impedances of LHC Collimators' Real Structures”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 178-182.
- G. Iadarola et al., “Detailed Studies of Beam Induced Scrubbing in the CERN-SPS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3908-3910.
- P. Amstutz et al., “Generation of short current spikes by laser modulation at FLASH”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB060, pp. 187-189.
- K. J. Ruisard et al., “Tuning Low-Current Beam for Nonlinear Quasi-Integrable Optics Experiments at the University of Maryland Electron Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3585-3588.
- J. Pasternak et al., “Accelerator and Particle Physics Research for the Next Generation Muon to Electron Conversion Experiment - the PRISM Task Force”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE056, pp. 3473-3475.
- N. Biancacci, L. R. Carver, G. Papotti, T. Persson, B. Salvant, and R. Tomas, “Impedance Localization Measurements using AC Dipoles in the LHC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 614-617.
- Y. Alexahin, E. Gianfelice-Wendt, and V. V. Kapin, “Effect of Field Errors in Muon Collider IR Magnets on Beam Dynamics”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC042, pp. 1257-1259.
- R. Stassen, F. J. Etzkorn, G. Schug, H. Stockhorst, T. Katayama, and L. Thorndahl, “RF and Stochastic Cooling System of the HESR”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD008, pp. 385-387.
- F. Giacuzzo et al., “Equipment and Machine Protection Systems for the FERMI@Elettra FEL facility”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU025, pp. 1119-1121.
- F. Hug, K. Aulenbacher, R. G. Heine, B. Ledroit, and D. Simon, “MESA - an ERL Project for Particle Physics Experiments”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 313-315.
- D. J. Crawford et al., “First Beam and High-Gradient Cryomodule Commissioning Results of the Advanced Superconducting Test Accelerator at Fermilab”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1831-1833.
- B. Goddard, E. Carlier, L. Ducimeti?¿re, G. Kotzian, J. A. Uythoven, and F. M. Velotti, “SPS Injection and Beam Quality for LHC Heavy Ions With 150 ns Kicker Rise Time”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1360-1362.
- E. Jauregi et al., “High Current Switch-mode Power Converter Prototype for LHC Project 6kA, 8V”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT048, pp. 656-658.
- A. Almomani and U. Ratzinger, “High Gradient Room Temperature Cavity Development for 10 ÔÇô 100 AMeV Beams”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO012, pp. 3785-3787.
- S. Jin, X. Y. Lu, K. Zhao, R. A. Rimmer, and A. T. Wu, “Study of I-V Characteristics at Different Locations Inside a Demountable Nb SRF Cavity During Vertical BEP and EP Treatments”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO033, pp. 450-455.
- B. Sun, Z. Li, J. Y. Tang, and F. Yan, “Local Compensation-Rematch for Element Failures in the Low Energy Section of C-Ads Accelerator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA018, pp. 1760-1762.
- F. Schmidt et al., “Code Bench-Marking for Long-Term Tracking and Adaptive Algorithms”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 357-361.
- A. Novokhatski, J. Seeman, and M. K. Sullivan, “A Model of an Electrical Discharge in the Flange Contacts with Omega Seals at High Currents in PEP-II”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP054, pp. 1667-1669.
Back to search