Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. Philippe, P. Gillette, and G. Normand, “User Interfaces for the Spiral2 Machine Protection System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC102, pp. 818-821.
[n] S. Kozub et al., “Development and Production of Superconducting and Cryogenic Equipment and Systems for Accelerators by IHEP”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THCHC01, pp. 295-299.
[n] A. Jejcic, M. Auguin, F. Boeri, J. Maillard, J. Silva, and A. Vincent-Carrefour, “Accelerator Simulation on a Parallel Computer”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1178-1181.
[n] M. S. Bakeman, W. Leemans, K. Nakamura, K. E. Robinson, C. B. Schroeder, and C. T??th, “Undulator-Based Laser Wakefield Accelerator Electron Beam Diagnostic”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP074, pp. 2967-2969.
[n] D. J. Liska, J. H. Billen, H. Mignardot, and G. W. Zimmerman, “A Rotary Tuner for UHF Drift-Tube Linacs”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 607-609.
[n] B. Groussin, M. Martinez Calderon, E. Granados, B. Marsh, and R. Rossel, “Copper surface treatment with deep UV ultrafast laser for improved photocathode photoemissive properties”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1350-1353. doi:10.18429/JACoW-IPAC2023-TUPA001
[n] E. Barr, S. Peggs, and C. Saltmarsh, “Relational Databases for SSC Design and Control”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1666-1669.
[n] B. Feinberg, G. Behrsing, K. Halbach, J. Marks, M. Morrison, and D. Nelson, “Laced Permanent Magnet Quadrupole Drift Tube Magnets”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-04, pp. 312-314.
[n] S. Joly et al., “A High-Brightness Photo-Injector for a Free Electron Laser Proposal”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 257-260.
[n] W. K. van Asselt, L. A. Ahrens, P. R. Cameron, S. Mandell, G. A. Smith, and W. Zhang, “The Tune Meter Systems at the AGS Complex”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1273-1276.
[n] R. A. Beth, “Complex Methods for Three-Dimensional Magnetic Fields”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 901-904.
[n] R. Palmer and J. S. Berg, “A Model for Determining Dipole, Quadrupole and Combined Function Magnet Costs”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF086, pp. 1807-1809.
[n] S. Petitdemange et al., “LIMA: Library for IMage Acquisition a Worldwide Project for 2D Detector Control”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 886-890. doi:10.18429/JACoW-ICALEPCS2017-TUPHA194
[n] Y. Wang, K. J. Morris, V. P. Suller, and S. Wang, “Progress in Raising the Energy of the CAMD Linac to 300 MeV”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC095, pp. 2216-2218.
[n] J. L. Martins, S. Fonseca, C. Joshi, S. F. Martins, W. B. Mori, and L. O. Silva, “Emission of Collimated X-Ray Radiation in Laser-Wakefield Experiments Using Particle Tracking in PIC Simulations”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP071, pp. 2958-2960.
[n] B. Rusnak et al., “Radio Frequency Superconducting Structures Development Laboratory Capability at Loa Alamos National Laboratory”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO418, pp. 91-92.
[n] K. N. Sjobak, E. Adli, and A. Grudiev, “Surface Field Optimization of Accelerating Structures for CLIC using ACE3P on Remote Computing Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO011, pp. 909-911.
[n] A. Furman, “Hourglass Effects for Asymmetric Colliders”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 422-425.
[n] W. Müller and W. Wolff, “On the Design of the Magnetic Field for a 450 MeV Proton Machine”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63H05, pp. XX-XX.
[n] K. Chida, K. Noda, T. Tanabe, and I. Watanabe, “An Electrostatic Storage Ring for Molecular Science”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3B16, pp. 797-802.
[n] Y. Miyahara, “Computer Simulation of Stabilizing the Radiation Power of Storage Ring Free Electron Laser”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 879-882.
[n] J. W. Xia, Y. Liu, L. J. Mao, R. S. Mao, J. C. Yang, and Y. J. Yuan, “Lanzhou Cooler Storage Ring Commissioning”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THYMH01, pp. 3611-3615.
[n] V. Kamerdzhiev et al., “BPM System Upgrade at COSY”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 303-306. doi:10.18429/JACoW-IBIC2018-TUPC04
[n] F. Gougnaud and P. Mattei, “The First Steps of the Beam Intensity Measurement of the Spiral2 Injector”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP053, pp. 504-506.
[n] M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3623-3626. doi:10.18429/JACoW-IPAC2016-THPMW033
[n] R. A. Baartman, G. Franchetti, and E. M?®tral, “Summary of Group A: Beam Dynamics in High Intensity Circular Machines”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper CPL01, pp. 482-484.
[n] D. J. MacNair, M. A. Kemp, K. J. P. Macken, M. N. Nguyen, and J. J. Olsen, “SLAC P2 MARX Control System and Regulation Scheme”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP196, pp. 1193-1195.
[n] V. H. Hardion, J. Lidon-Simon, M. Lindberg, A. Milan-Otero, A. G. Persson, and D. P. Spruce, “The Internet of Things and Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCB09, pp. 974-977.
[n] T. H. Harutunyan, E. D. Gazazyan, and M. K. Khojoyan, “The Strict Solution of a Radiation Problem in Toroidal Cavity”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS001, pp. 3260-3262.
[n] A. Ballarino, S. A. March, and K. H. Mess, “Commissioning of the LHC Current Leads”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD018, pp. 2446-2448.
[n] Z. R. Wolf, S. D. Anderson, V. Kaplounenko, Yu. I. Levashov, and A. W. Weidemann, “LCLS Undulator System Tuning and Magnetic Measurements”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP088, pp. 336-338.
[n] V. G. Khachatryan, W. Decking, V. V. Sahakyan, A. Tarloyan, and V. M. Tsakanov, “Optimization of the Focusing Lattice for European XFEL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC014, pp. 97-99.
[n] J. Branlard et al., “European XFEL RF Gun Commissioning and LLRF Linac Installation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2427-2429. doi:10.18429/JACoW-IPAC2014-WEPME065
[n] A. Orlov and E. V. Efremov, “Transient Effects in the Linear Accelerator for Free Electron Laser”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 781-784.
[n] L. M. C. Feliciano et al., “A New Hardware Design for PSB Kicker Magnets (KSW) for the 35 mm Transverse Painting in the Horizontal Plane”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3890-3892. doi:10.18429/JACoW-IPAC2015-THPF086
[n] A. L. Lin and G. Travish, “Use of Monocapillary X-Ray Optics as a Means to Reduce Linewidth and Fluctuations in SASE FELs”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THOB04, pp. 539-542.
[n] P. Singhai, P. Dhara, A. Roy, and S. Chatterjee, “Digital Pulse Processing Techniques for High Resolution Amplitude Measurement of Radiation Detector”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCC04, pp. 279-281.
[n] P. L. Morton, “Artificial Beam Enlargement”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 862-863.
[n] G. T. Danby, J. W. Jackson, and E. C. Raka, “AGS Lattice Corrections and Tuning Using Backleg Windings”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1007-1009.
[n] S. R. Norum et al., “The Machine Protection System for the Linac Coherent Light Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP093, pp. XX-XX.
[n] J. Bobnar, C. K. Allen, S. Peggs, T. A. Pelaia, T. Satogata, and C. G. Trahern, “Applicability of XAL for ESS”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL029, pp. 85-87.
[n] T. Wlostowski, J. Serrano, and F. Vaga, “Developing Distributed Hard-Real Time Software Systems Using FPGAs and Soft Cores”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1073-1078. doi:10.18429/JACoW-ICALEPCS2015-THHA2I01
[n] Y. Valdau, S. Mikirtytchiants, S. Trusov, L. Eltcov, and P. Wuestner, “Development of High Resolution Beam Current Measurement System for COSY-J??lich”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 434-437. doi:10.18429/JACoW-IBIC2016-TUPG41
[n] G. Carcassi and K. Shroff, “Pvmanager: A Java Library for Real-Time Data Processing”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC134, pp. 903-905.
[n] A. O. Hanson, D. Jamnik, C. S. Robinson, and C. L. Rogers, “Plans for a Superconducting CW Electron Linac at the University of Illinois”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper X-02, pp. 494-496.
[n] K. I. Mihailov, E. A. Golubkov, V. Kobets, A. N. Repkin, A. P. Sumbaev, and V. M. Pavlov, “Upgrade of the RF System on the LUE-200”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 256-257. doi:10.18429/JACoW-RUPAC2016-TUPSA019
[n] M. Loiselet, N. Postiau, and G. Ryckewaert, “Status Report of Cyclone”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-16, pp. 82-85.
[n] T. Takahashi, M. Izawa, S. Sakanaka, and K. Umemori, “Renewal of Klystron Power Supply for the Photon Factory Storage Ring at KEK”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP087, pp. 1035-1037.
[n] S. J. Full et al., “A Fast Rotating Wire Scanner for use in High Current Accelerators”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOBA1, pp. 385-387.
[n] T. Shimada et al., “Thermal Deformation of Magnetic Alloy Cores for J-PARC RCS RF Cavities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA019, pp. 3717-3719.
[n] W. B. Herrmannsfeldt, H. A. Hogg, G. A. Loew, and R. B. Neal, “Feasibility Study of a Two-Mile Superconducting Linac”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1004-1009.
[n] B. A. Tatum, D. T. Dowling, R. S. Lord, S. W. Mosko, and D. K. Olsen, “Design, Construction, and Field Mapping of the HISTRAP Prototype Dipole”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 393-396.
[n] W. Le Coz, C. Doutresssoulles, C. Jamet, G. Ledu, S. Loret, and C. Potier de courcy, “Measurement and Control of the Beam Energy for the SPIRAL2 Accelerator”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF32, pp. 897-899.
For LaTeX
Use Complete Form
For BibTeX
References
- L. Philippe, P. Gillette, and G. Normand, “User Interfaces for the Spiral2 Machine Protection System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC102, pp. 818-821.
- S. Kozub et al., “Development and Production of Superconducting and Cryogenic Equipment and Systems for Accelerators by IHEP”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THCHC01, pp. 295-299.
- A. Jejcic, M. Auguin, F. Boeri, J. Maillard, J. Silva, and A. Vincent-Carrefour, “Accelerator Simulation on a Parallel Computer”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1178-1181.
- M. S. Bakeman, W. Leemans, K. Nakamura, K. E. Robinson, C. B. Schroeder, and C. T??th, “Undulator-Based Laser Wakefield Accelerator Electron Beam Diagnostic”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP074, pp. 2967-2969.
- D. J. Liska, J. H. Billen, H. Mignardot, and G. W. Zimmerman, “A Rotary Tuner for UHF Drift-Tube Linacs”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 607-609.
- B. Groussin, M. Martinez Calderon, E. Granados, B. Marsh, and R. Rossel, “Copper surface treatment with deep UV ultrafast laser for improved photocathode photoemissive properties”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA001, pp. 1350-1353.
- E. Barr, S. Peggs, and C. Saltmarsh, “Relational Databases for SSC Design and Control”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1666-1669.
- B. Feinberg, G. Behrsing, K. Halbach, J. Marks, M. Morrison, and D. Nelson, “Laced Permanent Magnet Quadrupole Drift Tube Magnets”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-04, pp. 312-314.
- S. Joly et al., “A High-Brightness Photo-Injector for a Free Electron Laser Proposal”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 257-260.
- W. K. van Asselt, L. A. Ahrens, P. R. Cameron, S. Mandell, G. A. Smith, and W. Zhang, “The Tune Meter Systems at the AGS Complex”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1273-1276.
- R. A. Beth, “Complex Methods for Three-Dimensional Magnetic Fields”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 901-904.
- R. Palmer and J. S. Berg, “A Model for Determining Dipole, Quadrupole and Combined Function Magnet Costs”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF086, pp. 1807-1809.
- S. Petitdemange et al., “LIMA: Library for IMage Acquisition a Worldwide Project for 2D Detector Control”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 886-890.
- Y. Wang, K. J. Morris, V. P. Suller, and S. Wang, “Progress in Raising the Energy of the CAMD Linac to 300 MeV”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC095, pp. 2216-2218.
- J. L. Martins, S. Fonseca, C. Joshi, S. F. Martins, W. B. Mori, and L. O. Silva, “Emission of Collimated X-Ray Radiation in Laser-Wakefield Experiments Using Particle Tracking in PIC Simulations”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP071, pp. 2958-2960.
- B. Rusnak et al., “Radio Frequency Superconducting Structures Development Laboratory Capability at Loa Alamos National Laboratory”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO418, pp. 91-92.
- K. N. Sjobak, E. Adli, and A. Grudiev, “Surface Field Optimization of Accelerating Structures for CLIC using ACE3P on Remote Computing Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO011, pp. 909-911.
- A. Furman, “Hourglass Effects for Asymmetric Colliders”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 422-425.
- W. Müller and W. Wolff, “On the Design of the Magnetic Field for a 450 MeV Proton Machine”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63H05, pp. XX-XX.
- K. Chida, K. Noda, T. Tanabe, and I. Watanabe, “An Electrostatic Storage Ring for Molecular Science”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3B16, pp. 797-802.
- Y. Miyahara, “Computer Simulation of Stabilizing the Radiation Power of Storage Ring Free Electron Laser”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 879-882.
- J. W. Xia, Y. Liu, L. J. Mao, R. S. Mao, J. C. Yang, and Y. J. Yuan, “Lanzhou Cooler Storage Ring Commissioning”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THYMH01, pp. 3611-3615.
- V. Kamerdzhiev et al., “BPM System Upgrade at COSY”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 303-306.
- F. Gougnaud and P. Mattei, “The First Steps of the Beam Intensity Measurement of the Spiral2 Injector”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP053, pp. 504-506.
- M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3623-3626.
- R. A. Baartman, G. Franchetti, and E. M?®tral, “Summary of Group A: Beam Dynamics in High Intensity Circular Machines”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper CPL01, pp. 482-484.
- D. J. MacNair, M. A. Kemp, K. J. P. Macken, M. N. Nguyen, and J. J. Olsen, “SLAC P2 MARX Control System and Regulation Scheme”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP196, pp. 1193-1195.
- V. H. Hardion, J. Lidon-Simon, M. Lindberg, A. Milan-Otero, A. G. Persson, and D. P. Spruce, “The Internet of Things and Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCB09, pp. 974-977.
- T. H. Harutunyan, E. D. Gazazyan, and M. K. Khojoyan, “The Strict Solution of a Radiation Problem in Toroidal Cavity”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS001, pp. 3260-3262.
- A. Ballarino, S. A. March, and K. H. Mess, “Commissioning of the LHC Current Leads”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD018, pp. 2446-2448.
- Z. R. Wolf, S. D. Anderson, V. Kaplounenko, Yu. I. Levashov, and A. W. Weidemann, “LCLS Undulator System Tuning and Magnetic Measurements”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP088, pp. 336-338.
- V. G. Khachatryan, W. Decking, V. V. Sahakyan, A. Tarloyan, and V. M. Tsakanov, “Optimization of the Focusing Lattice for European XFEL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC014, pp. 97-99.
- J. Branlard et al., “European XFEL RF Gun Commissioning and LLRF Linac Installation”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2427-2429.
- A. Orlov and E. V. Efremov, “Transient Effects in the Linear Accelerator for Free Electron Laser”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 781-784.
- L. M. C. Feliciano et al., “A New Hardware Design for PSB Kicker Magnets (KSW) for the 35 mm Transverse Painting in the Horizontal Plane”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3890-3892.
- A. L. Lin and G. Travish, “Use of Monocapillary X-Ray Optics as a Means to Reduce Linewidth and Fluctuations in SASE FELs”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper THOB04, pp. 539-542.
- P. Singhai, P. Dhara, A. Roy, and S. Chatterjee, “Digital Pulse Processing Techniques for High Resolution Amplitude Measurement of Radiation Detector”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCC04, pp. 279-281.
- P. L. Morton, “Artificial Beam Enlargement”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 862-863.
- G. T. Danby, J. W. Jackson, and E. C. Raka, “AGS Lattice Corrections and Tuning Using Backleg Windings”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1007-1009.
- S. R. Norum et al., “The Machine Protection System for the Linac Coherent Light Source”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP093, pp. XX-XX.
- J. Bobnar, C. K. Allen, S. Peggs, T. A. Pelaia, T. Satogata, and C. G. Trahern, “Applicability of XAL for ESS”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL029, pp. 85-87.
- T. Wlostowski, J. Serrano, and F. Vaga, “Developing Distributed Hard-Real Time Software Systems Using FPGAs and Soft Cores”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1073-1078.
- Y. Valdau, S. Mikirtytchiants, S. Trusov, L. Eltcov, and P. Wuestner, “Development of High Resolution Beam Current Measurement System for COSY-J??lich”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 434-437.
- G. Carcassi and K. Shroff, “Pvmanager: A Java Library for Real-Time Data Processing”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC134, pp. 903-905.
- A. O. Hanson, D. Jamnik, C. S. Robinson, and C. L. Rogers, “Plans for a Superconducting CW Electron Linac at the University of Illinois”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper X-02, pp. 494-496.
- K. I. Mihailov, E. A. Golubkov, V. Kobets, A. N. Repkin, A. P. Sumbaev, and V. M. Pavlov, “Upgrade of the RF System on the LUE-200”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 256-257.
- M. Loiselet, N. Postiau, and G. Ryckewaert, “Status Report of Cyclone”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper I-16, pp. 82-85.
- T. Takahashi, M. Izawa, S. Sakanaka, and K. Umemori, “Renewal of Klystron Power Supply for the Photon Factory Storage Ring at KEK”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP087, pp. 1035-1037.
- S. J. Full et al., “A Fast Rotating Wire Scanner for use in High Current Accelerators”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOBA1, pp. 385-387.
- T. Shimada et al., “Thermal Deformation of Magnetic Alloy Cores for J-PARC RCS RF Cavities”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA019, pp. 3717-3719.
- W. B. Herrmannsfeldt, H. A. Hogg, G. A. Loew, and R. B. Neal, “Feasibility Study of a Two-Mile Superconducting Linac”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1004-1009.
- B. A. Tatum, D. T. Dowling, R. S. Lord, S. W. Mosko, and D. K. Olsen, “Design, Construction, and Field Mapping of the HISTRAP Prototype Dipole”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 393-396.
- W. Le Coz, C. Doutresssoulles, C. Jamet, G. Ledu, S. Loret, and C. Potier de courcy, “Measurement and Control of the Beam Energy for the SPIRAL2 Accelerator”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF32, pp. 897-899.
Back to search