Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Leitner and C. M. Lyneis, “High Intensity High Charge State ECR Ion Sources”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPB002, pp. 179-183.
[n] B. Nguyen et al., “Design and characterization of adjustable-length pulse generator for beam kicker system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3803-3805. doi:10.18429/JACoW-IPAC2024-THPS30
[n] Y. Yang, A. Nassiri, T. L. Smith, G. J. Waldschmidt, G. Wu, and H. Wang, “Mode Damping Measurement for the APS Deflecting Cavity”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC02, pp. 787-789.
[n] I. N. D. Draganic et al., “Bunch Shape Monitor Measurements at the LANSCE Linac”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 25-27. doi:10.18429/JACoW-NAPAC2016-MOA3CO03
[n] P. Duval, A. Aghababyan, O. Hensler, and K. Rehlich, “Control System Interoperability, an Extreme Case: Merging DOOCS and TINE”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THIB04, pp. 115-117.
[n] R. Frankel, “The Knife Switch, The Relay and The IC”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 418-419.
[n] R. Cai et al., “LHC crystal collimation tests with 6.8 Z TeV Pb beams”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2503-2506. doi:10.18429/JACoW-IPAC2023-TUPM120
[n] S. Kozub et al., “Design and Tests of UNK Superconducting Correction Magnet Models”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2772-2775.
[n] R. I. Cutler and L. Young, “Performance of the High Power RF System of the NBS-Los Alamos Racetrack Microtron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1863-1866.
[n] C. Dickey, G. V. Karpov, J. Madey, A. S. Medvedko, E. I. Shubin, and N. I. Zinevich, “NMR System for Magnetic Field Measurements at the MARK-3 Free Electron Laser”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP009G, pp. 2541-2542.
[n] G. J. Caporaso, A. G. Cole, and K. W. Struve, “Beam Breakup (BBU) Instability Experiments on the Experimental Test Accelerator (ETA) and Predictions for the Advanced Test Accelerator (ATA)”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2507-2510.
[n] T. Shintake et al., “C-Band Linac System for SASE-FEL at SPring-8”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper WE101, pp. 524-528.
[n] B. S. K. Srivastava, R. K. Agrawal, K. G. Barpande, P. Fatnani, and C. P. Navathe, “FLogbook: From Concept to Realization”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD06, pp. 148-150.
[n] H. Takeda, “Semi-Analytical Calculation of Accelerating Beam in a Photo-Injector Cavity”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU425, pp. 369-371.
[n] H. Ghasem, E. Ahmadi, and F. Saeidi, “Lattice Design History of the Iranian Light Source Facility Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 249-251. doi:10.18429/JACoW-IPAC2014-MOPRO072
[n] P. Leban and G. Decker, “Initial Tests of New Electron and Photon Beam Position Monitor Electronics at the Advanced Photon Source”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD19, pp. 344-346.
[n] B. G. Chidley, J. C. Brown, and J. Ungrin, “Conditioning Experiments on the 100% Duty Factor 3 MeV Alvarez Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S6-7, pp. 360-363.
[n] F. Nolden, “Numerical Analysis of Low-Intensity Schottky Spectra Recorded as Time Series”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper THPMCP001, pp. 123-126.
[n] H. Li et al., “DEVELOPMENT OF A VERY LOW BETA SUPERCONDUCTING SINGLE SPOKE CAVITY FOR CHINA-ADS LINAC”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP022, pp. 942-945.
[n] K. P. Nesteruk, M. Auger, S. Braccini, T. S. Carzaniga, A. Ereditato, and P. Scampoli, “Study of the Transverse Beam Emittance of the Bern Medical Cyclotron”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 134-138. doi:10.18429/JACoW-IBIC2015-MOPB041
[n] M. R. Clausen, M. Moeller, S. Rettig-Labusga, and B. Schoeneburg, “What it Takes to Make a System Reliable”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD02, pp. 139-141.
[n] V. S. Klenov, Yu. V. Kiselev, O. Volodkevich, and V. Zubets, “Development of Remote Control System for H-minus Ions Source of INR LINAC”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC44, pp. 423-425.
[n] T.-Y. Lee, “RMS Mode Size of the XFEL Radiation”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH064, pp. 128-130.
[n] B. H. Smith, R. J. Burton, and R. M. Hutcheon, “High Speed Resonant Frequency Determination Applied to Field Mapping Using Perturbation Techniques”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-55, pp. 468-470.
[n] I. Yamane, “Present status of POP experiment of lasaer stripping at BNL”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THBY02, pp. XX-XX.
[n] O. Felden, R. Gebel, K. Grigoryev, V. Kamerdzhiev, and Y. Valdau, “JULIC - Driver Accelerator for HBS”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper THPO005, pp. 303-306. doi:10.18429/JACoW-CYCLOTRONS2022-THPO005
[n] F. Marti et al., “Beam Dynamics Issues in the NSCL Coupled Cyclotron Upgrade”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-01, pp. 447-453.
[n] R. R. Lindberg, W. M. Fawley, K.-J. Kim, and Yu. Shvyd, “Simulation Studies of the X-ray Free-Electron Laser Oscillator”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC40, pp. 587-590.
[n] T. Katayama and Y. N. Rao, “Intrabeam Scattering of Heavy Ion in DSR”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP019G, pp. 1024-1026.
[n] Y. Sakurada, S. M. Bielamowicz, G. D. DeHaven, R. L. Haisler, H. W. Peeler, and W. J. Walterscheid, “Heavy-Ion Source for the Texas AM 88-Inch Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-13, pp. 2175-2178.
[n] C. M. Lyneis, “Scaling Laws in Electron Cyclotron Resonance Ion Sources”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. XX-XX. doi:10.18429/JACoW-ECRIS2016-MOAO01
[n] G. Spalek and A. Klapetzky, “A Coaxial Line Azimuthal Field Stabilizer for Radio Frequency Quadrupoles”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO410, pp. 67-69.
[n] B. Lindstrom et al., “Crab Cavity Failures Combined with a Loss of the Beam-Beam Kick in the High Luminosity LHC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 192-195. doi:10.18429/JACoW-IPAC2018-MOPMF042
[n] S. Mazzoni et al., “Recent Results on Non-invasive Beam Size Measurement Methods Based on Polarization Currents”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 464-467. doi:10.18429/JACoW-IBIC2018-WEPB14
[n] G. von Holtey, W. Niessen, and P. Roudeau, “Synchrotron Radiation Masks for LEP2”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 454-457.
[n] H. Stechemesser et al., “Design and Technical Features of the Vacuum System at COSY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1410-1413.
[n] R. M. Bodenstein, P. Burrows, and E. Marin, “Challenges and Status of Tuning Simulations for CLIC Traditional Beam Delivery System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 412-414. doi:10.18429/JACoW-IPAC2018-MOPML010
[n] R. P. Johnson, W. R. Knopf, and A. D. Thomas, “The Fermilab Timeline Generation System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2053-2056.
[n] B. M. Dunham and M. Jablonka, “A High Charge Injector for the TESLA Test Facility”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 695-698.
[n] D. L. Smart and B. H. Smith, “Investigation of the Characteristics of Ceramic Capacitators for Synchrotron Kicker-Magnet Applications”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 772-775.
[n] E. Bravin et al., “Collision Rate Monitors for LHC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN067, pp. 4171-4173.
[n] L. Yang, F. Long, and Z. H. ZhenHua, “Design and Development of Accelerator Magnet Power Supply Based on SiC-MOSFET”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3429-3431. doi:10.18429/JACoW-IPAC2017-WEPVA068
[n] B. X. Yang, N. Arnold, W. Berg, E. R. Rotela, S. Sharma, and S. J. Stein, “Design and Performance of a Compact Imaging System for the APS Linac Bunch Compressor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH107, pp. 2335-2337.
[n] H. Henke and O. Napoly, “Wake Fields Between Two Parallel Resistive Plates”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1046-1049.
[n] C. Charrondiere et al., “RADE - A Rapid Application Development Framework Used for LHC Hardware Commissioning Tools and Other Accelerator Related Applications”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP097, pp. 868-870.
[n] J. Watson et al., “Design of the SSC Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 572-575.
[n] N. C. Pering et al., “General Description and Performance Measurements on DESY Linac II Electron-Positron Injector”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 579-584.
[n] H. Schoenauer, “Neutralization of Bunched Proton Beams”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 866-869.
[n] J. Haimson and B. Mecklenburg, “Design and Construction of a 33 GHz Brazed Accelerator Waveguide for High Gradient Operation”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1928-1931.
[n] H. Zhao, Z. Shen, and B. W. Wei, “Emittance Measurements in the HIRFL Beam Line”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXD-04, pp. 479-482.
[n] K. L. Junck and E. S. McCrory, “Beam Position Correction in the Fermilab Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-76, pp. 881-883.
[n] J. Haimson, B. Mecklenburg, and C. Williamson, “Comparison of Conventional L and S-Band Electron Linacs as Pion Sources Suitable for Radiotherapy”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1805-1809.
[n] C. A. Brau, H. L. Andrews, C. H. Boulware, and J. D. Jarvis, “Effect of Losses on the Gain and Start Current in Smith-Purcell Free-Electron Lasers”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THOC004, pp. XX-XX.
[n] M. Yadav et al., “Physical Aspects of Collinear Laser Injection at SLAC FACET-II E-310: Trojan Horse Experiment”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1787-1790. doi:10.18429/JACoW-IPAC2022-WEPOST041
[n] S. A. Gavrilov and A. Feschenko, “Design and Development of Bunch Shape Monitor for FRIB MSU”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 179-181. doi:10.18429/JACoW-IBIC2017-TUPCC13
[n] M. Cavenago, M. Morvillo, and A. M. Porcellato, “High Resolution Bead Technique Measurements and Multipole Analysis”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP036L, pp. 1982-1984.
[n] V. I. Moiseev, “Ultrasound Instrumentation for Beam Diagnostics and Accelerating Structures Control”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POW017, pp. XX-XX.
[n] S. H. Kim, G. K. Shenoy, and P. J. Viccaro, “Spectral Character of Optimized Undulator Insertion Devices for the Synchrotron X-Ray Source at Argonne”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 473-476.
[n] H. S. Vora et al., “Master Slave Topology Based, Remotely Operated, Precision X-ray Beam Profiler and Placement System for High Pressure Physics Experiment at Indus-2 Beam Line”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THCD04, pp. 128-130.
[n] V. I. Moiseev, V. Korchuganov, and A. Vernov, “RF Cavities HOM Longitudinal Instabilities at SR Source Siberia-2 in KCSR”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB021, pp. 210-211.
[n] I. A. Ivanenko, I. V. Kalagin, V. I. Kazacha, and N. Yu. Kazarinov, “Getting Uniform Ion Density on Target in High-Energy Beam Line of Cyclotron U-400M with Two”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT007, pp. 335-337.
[n] L. Fernandez-Hernando et al., “A Beam Condition Monitor for the Experimental Areas of the LHC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT008, pp. 2475-2477.
[n] G. Kazakevich, M. Popovic, and R. Johnson, “Studies of operation and control of CW magnetrons for HEP and ADS accelerators”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR30, unpublished.
[n] G. E. Danby and J. W. Jackson, “Static and Dynamic Magnetic End Effects and Correction Magnets for the AGS Booster”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 381-384.
[n] J. Bengtsson, D. Briggs, and M. Meddahi, “Six-Dimensional Modeling of Coherent Bunch Instabilities and Related Feedback Systems in Storage Rings with Power-Series Maps for the Lattice”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1084-1087.
[n] N. Samadi, L. D. Chapman, and L. O. Dallin, “A Vertical Phase Space Beam Position and Emittance Monitor for Synchrotron Radiation”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 186-189. doi:10.18429/JACoW-IBIC2018-TUOB04
[n] J. Neilson, V. A. Dolgashev, and S. G. Tantawi, “Design of an RF Feed System for Standing-wave Accelerator Structures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC072, pp. 244-246.
[n] H. Reymond, M. F. Gomez De La Cruz, I. T. Matasaho, and A. Rijllart, “The Control System of the CERN Platform for the Test of the High Luminosity LHC Superconducting Magnets”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 918-922. doi:10.18429/JACoW-ICALEPCS2017-TUPHA202
[n] A. Ts. Amatuni et al., “The Yerevan Electron Accelerator: Status and Development”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 406-409.
[n] J. J. Song, P. J. Matthews, and J. Zhou, “Longitudinal Coupling Impedance of a Bellows and a Ceramic Gap in a Circular Beam Pipe for the Advanced Photon Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1336-1339.
[n] R. Frankel, “Variable Mode Solid State Magnet Cycle Timer”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 427-430.
[n] I. Yamane and Y. Yamaguchi, “Stripping Carbon Foils for H-Charge-Exchange Injection into the KEK-PS Booster”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1948-1951.
[n] U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper THM2IS03, pp. 308-308.
[n] J. Buon, P. Puzo, J. Jeanjean, F. Le Diberder, V. Lepeltier, and B. Delcourt, “The Orsay Spot Size Monitor for the Final Focus Test Beam”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2513-2516.
[n] J. Y. Lee et al., “Design of 1.5 GeV Compact Storage Ring for the EUV and Soft X-rays”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1028-1030. doi:10.18429/JACoW-IPAC2019-MOPTS079
[n] L. Bandiera et al., “Study and optimization of an hybrid crystal-based positron source for the FCC-ee”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA085, unpublished.
[n] D.Pestrikov, “COLLECTIVE BEAM-BEAM INSTABILITIES OF BUNCHES WITH TUNESPREADS”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH06, pp. XX-XX.
[n] J. C. Brown and B. G. Chidley, “A High Power RF Supply for the Chalk River 100% Duty Factor Alvarez Linac”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper E10, pp. 296-299.
[n] M. J. Syphers and A. Narayanan, “Sensitivity Analyses of All-Electric Storage Ring Designs”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1148-1151. doi:10.18429/JACoW-IPAC2019-MOPTS113
[n] M. Popovic et al., “Development and Testing of High Power CW 1497 MHz Magnetron”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1351-1353. doi:10.18429/JACoW-IPAC2022-TUPOTK058
[n] M. Abs, J. M. Capdevila, T. Delvigne, F. Genin, Y. Jongen, and A. Nguyen, “RHODOTRON Accelerators for Industrial Electron-Beam Processing: A Progress Report”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP076G, pp. 2687-2692.
[n] F. Bordry and A. Dupaquier, “High Current, Low Voltage Power Converters for LHC. Present Development Directions”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP009G, pp. 2314-2316.
[n] R. D?Âlling, “Progress of the Diagnostics at the Proscan Beam Lines”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC23, pp. 361-363.
[n] S. J. Park, Y. J. Park, J. H. Hwang, S.-G. Shin, S. Y. Hyun, and D. H. Yu, “Electron-beam Matching to Solenoid Magnetic Field in a Klystron”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 534-536. doi:10.18429/JACoW-LINAC2018-TUPO090
[n] Y. L. Xu et al., “Phase Extraction and Stabilization for Coherent Pulse Stacking”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4895-4897. doi:10.18429/JACoW-IPAC2018-THPML099
[n] E. Trakhtenberg et al., “LCLS Undulator Production”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN100, pp. 1148-1150.
[n] A. V. Mishin, H. DeRuyter, T. Roumbanis, and R. G. Schonberg, “Intraoperative X-band Accelerator Microwave Structure Design”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2185-2188.
[n] J. M. Potter, “An RF Power Manifold for the Radio Frequency Quadrupole Linear Accelerator”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S3-2, pp. 138-143.
[n] R. Kustom, A. Nassiri, K. J. Suthar, and G. J. Waldschmidt, “Dielectrically-Loaded Waveguide as a Short Period Superconducting Microwave Undulator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 897-900. doi:10.18429/JACoW-NAPAC2016-WEPOB07
[n] M. W. U. Van Dijk et al., “The K12 Beamline for the KLEVER Experiment”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3726-3729. doi:10.18429/JACoW-IPAC2019-THPGW061
[n] O. Hensler, “Controls Architecture for the Diagnostic Devices at the European XFEL”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THCC02, pp. 121-123.
[n] S. J. Gessner, E. Adli, F.-J. Decker, M. J. Hogan, T. O. Raubenheimer, and A. Scheinker, “Longitudinal Phase Space Dynamics with Novel Diagnostic Techniques at FACET”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA069, pp. 1865-1867.
[n] W. H?Âfle et al., “LHC Transverse Feedback System and its Hardware Commissioning”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC121, pp. 3266-3268.
[n] P. Xydi et al., “Main Field Tracking Measurement in the LHC Superconducting Dipole and Quadrupole Magnets”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD034, pp. 2485-2487.
[n] I. Yamane, S. Hiramatsu, M. Kihara, N. Kumagai, and E. Takasaki, “Performance Improvement of the KEK PS-Booster Synchrotron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 301-304.
[n] Yu. A. Rogovsky and I. Nesterenko, “Calibration of the Electrostatic Beam Position Monitors for VEPP-2000”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA028, pp. 98-100.
[n] V. A. Dolgashev et al., “Status of X-band Standing Wave Structure Studies at SLAC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB031, pp. 1264-1266.
[n] A. Kanareykin et al., “Simulations and Measurements of Beam Breakup in Dielectric Wakefield Structures”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC081, pp. 1904-1906.
[n] E. Keil and A. M. Sessler, “Muon Acceleration in FFAG Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAB010, pp. 414-416.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Leitner and C. M. Lyneis, “High Intensity High Charge State ECR Ion Sources”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPB002, pp. 179-183.
- B. Nguyen et al., “Design and characterization of adjustable-length pulse generator for beam kicker system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS30, pp. 3803-3805.
- Y. Yang, A. Nassiri, T. L. Smith, G. J. Waldschmidt, G. Wu, and H. Wang, “Mode Damping Measurement for the APS Deflecting Cavity”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC02, pp. 787-789.
- I. N. D. Draganic et al., “Bunch Shape Monitor Measurements at the LANSCE Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 25-27.
- P. Duval, A. Aghababyan, O. Hensler, and K. Rehlich, “Control System Interoperability, an Extreme Case: Merging DOOCS and TINE”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THIB04, pp. 115-117.
- R. Frankel, “The Knife Switch, The Relay and The IC”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 418-419.
- R. Cai et al., “LHC crystal collimation tests with 6.8 Z TeV Pb beams”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM120, pp. 2503-2506.
- S. Kozub et al., “Design and Tests of UNK Superconducting Correction Magnet Models”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2772-2775.
- R. I. Cutler and L. Young, “Performance of the High Power RF System of the NBS-Los Alamos Racetrack Microtron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1863-1866.
- C. Dickey, G. V. Karpov, J. Madey, A. S. Medvedko, E. I. Shubin, and N. I. Zinevich, “NMR System for Magnetic Field Measurements at the MARK-3 Free Electron Laser”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP009G, pp. 2541-2542.
- G. J. Caporaso, A. G. Cole, and K. W. Struve, “Beam Breakup (BBU) Instability Experiments on the Experimental Test Accelerator (ETA) and Predictions for the Advanced Test Accelerator (ATA)”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2507-2510.
- T. Shintake et al., “C-Band Linac System for SASE-FEL at SPring-8”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper WE101, pp. 524-528.
- B. S. K. Srivastava, R. K. Agrawal, K. G. Barpande, P. Fatnani, and C. P. Navathe, “FLogbook: From Concept to Realization”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD06, pp. 148-150.
- H. Takeda, “Semi-Analytical Calculation of Accelerating Beam in a Photo-Injector Cavity”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU425, pp. 369-371.
- H. Ghasem, E. Ahmadi, and F. Saeidi, “Lattice Design History of the Iranian Light Source Facility Storage Ring”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 249-251.
- P. Leban and G. Decker, “Initial Tests of New Electron and Photon Beam Position Monitor Electronics at the Advanced Photon Source”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD19, pp. 344-346.
- B. G. Chidley, J. C. Brown, and J. Ungrin, “Conditioning Experiments on the 100% Duty Factor 3 MeV Alvarez Linac”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S6-7, pp. 360-363.
- F. Nolden, “Numerical Analysis of Low-Intensity Schottky Spectra Recorded as Time Series”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper THPMCP001, pp. 123-126.
- H. Li et al., “DEVELOPMENT OF A VERY LOW BETA SUPERCONDUCTING SINGLE SPOKE CAVITY FOR CHINA-ADS LINAC”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP022, pp. 942-945.
- K. P. Nesteruk, M. Auger, S. Braccini, T. S. Carzaniga, A. Ereditato, and P. Scampoli, “Study of the Transverse Beam Emittance of the Bern Medical Cyclotron”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 134-138.
- M. R. Clausen, M. Moeller, S. Rettig-Labusga, and B. Schoeneburg, “What it Takes to Make a System Reliable”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD02, pp. 139-141.
- V. S. Klenov, Yu. V. Kiselev, O. Volodkevich, and V. Zubets, “Development of Remote Control System for H-minus Ions Source of INR LINAC”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC44, pp. 423-425.
- T.-Y. Lee, “RMS Mode Size of the XFEL Radiation”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH064, pp. 128-130.
- B. H. Smith, R. J. Burton, and R. M. Hutcheon, “High Speed Resonant Frequency Determination Applied to Field Mapping Using Perturbation Techniques”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-55, pp. 468-470.
- I. Yamane, “Present status of POP experiment of lasaer stripping at BNL”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper THBY02, pp. XX-XX.
- O. Felden, R. Gebel, K. Grigoryev, V. Kamerdzhiev, and Y. Valdau, “JULIC - Driver Accelerator for HBS”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper THPO005, pp. 303-306.
- F. Marti et al., “Beam Dynamics Issues in the NSCL Coupled Cyclotron Upgrade”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-01, pp. 447-453.
- R. R. Lindberg, W. M. Fawley, K.-J. Kim, and Yu. Shvyd, “Simulation Studies of the X-ray Free-Electron Laser Oscillator”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC40, pp. 587-590.
- T. Katayama and Y. N. Rao, “Intrabeam Scattering of Heavy Ion in DSR”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP019G, pp. 1024-1026.
- Y. Sakurada, S. M. Bielamowicz, G. D. DeHaven, R. L. Haisler, H. W. Peeler, and W. J. Walterscheid, “Heavy-Ion Source for the Texas AM 88-Inch Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper D-13, pp. 2175-2178.
- C. M. Lyneis, “Scaling Laws in Electron Cyclotron Resonance Ion Sources”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. XX-XX.
- G. Spalek and A. Klapetzky, “A Coaxial Line Azimuthal Field Stabilizer for Radio Frequency Quadrupoles”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO410, pp. 67-69.
- B. Lindstrom et al., “Crab Cavity Failures Combined with a Loss of the Beam-Beam Kick in the High Luminosity LHC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 192-195.
- S. Mazzoni et al., “Recent Results on Non-invasive Beam Size Measurement Methods Based on Polarization Currents”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 464-467.
- G. von Holtey, W. Niessen, and P. Roudeau, “Synchrotron Radiation Masks for LEP2”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 454-457.
- H. Stechemesser et al., “Design and Technical Features of the Vacuum System at COSY”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1410-1413.
- R. M. Bodenstein, P. Burrows, and E. Marin, “Challenges and Status of Tuning Simulations for CLIC Traditional Beam Delivery System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 412-414.
- R. P. Johnson, W. R. Knopf, and A. D. Thomas, “The Fermilab Timeline Generation System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2053-2056.
- B. M. Dunham and M. Jablonka, “A High Charge Injector for the TESLA Test Facility”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 695-698.
- D. L. Smart and B. H. Smith, “Investigation of the Characteristics of Ceramic Capacitators for Synchrotron Kicker-Magnet Applications”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 772-775.
- E. Bravin et al., “Collision Rate Monitors for LHC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN067, pp. 4171-4173.
- L. Yang, F. Long, and Z. H. ZhenHua, “Design and Development of Accelerator Magnet Power Supply Based on SiC-MOSFET”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3429-3431.
- B. X. Yang, N. Arnold, W. Berg, E. R. Rotela, S. Sharma, and S. J. Stein, “Design and Performance of a Compact Imaging System for the APS Linac Bunch Compressor”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH107, pp. 2335-2337.
- H. Henke and O. Napoly, “Wake Fields Between Two Parallel Resistive Plates”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1046-1049.
- C. Charrondiere et al., “RADE - A Rapid Application Development Framework Used for LHC Hardware Commissioning Tools and Other Accelerator Related Applications”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP097, pp. 868-870.
- J. Watson et al., “Design of the SSC Linac”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 572-575.
- N. C. Pering et al., “General Description and Performance Measurements on DESY Linac II Electron-Positron Injector”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 579-584.
- H. Schoenauer, “Neutralization of Bunched Proton Beams”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 866-869.
- J. Haimson and B. Mecklenburg, “Design and Construction of a 33 GHz Brazed Accelerator Waveguide for High Gradient Operation”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1928-1931.
- H. Zhao, Z. Shen, and B. W. Wei, “Emittance Measurements in the HIRFL Beam Line”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXD-04, pp. 479-482.
- K. L. Junck and E. S. McCrory, “Beam Position Correction in the Fermilab Linac”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-76, pp. 881-883.
- J. Haimson, B. Mecklenburg, and C. Williamson, “Comparison of Conventional L and S-Band Electron Linacs as Pion Sources Suitable for Radiotherapy”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1805-1809.
- C. A. Brau, H. L. Andrews, C. H. Boulware, and J. D. Jarvis, “Effect of Losses on the Gain and Start Current in Smith-Purcell Free-Electron Lasers”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THOC004, pp. XX-XX.
- M. Yadav et al., “Physical Aspects of Collinear Laser Injection at SLAC FACET-II E-310: Trojan Horse Experiment”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1787-1790.
- S. A. Gavrilov and A. Feschenko, “Design and Development of Bunch Shape Monitor for FRIB MSU”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 179-181.
- M. Cavenago, M. Morvillo, and A. M. Porcellato, “High Resolution Bead Technique Measurements and Multipole Analysis”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP036L, pp. 1982-1984.
- V. I. Moiseev, “Ultrasound Instrumentation for Beam Diagnostics and Accelerating Structures Control”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POW017, pp. XX-XX.
- S. H. Kim, G. K. Shenoy, and P. J. Viccaro, “Spectral Character of Optimized Undulator Insertion Devices for the Synchrotron X-Ray Source at Argonne”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 473-476.
- H. S. Vora et al., “Master Slave Topology Based, Remotely Operated, Precision X-ray Beam Profiler and Placement System for High Pressure Physics Experiment at Indus-2 Beam Line”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THCD04, pp. 128-130.
- V. I. Moiseev, V. Korchuganov, and A. Vernov, “RF Cavities HOM Longitudinal Instabilities at SR Source Siberia-2 in KCSR”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB021, pp. 210-211.
- I. A. Ivanenko, I. V. Kalagin, V. I. Kazacha, and N. Yu. Kazarinov, “Getting Uniform Ion Density on Target in High-Energy Beam Line of Cyclotron U-400M with Two”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPPT007, pp. 335-337.
- L. Fernandez-Hernando et al., “A Beam Condition Monitor for the Experimental Areas of the LHC”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT008, pp. 2475-2477.
- G. Kazakevich, M. Popovic, and R. Johnson, “Studies of operation and control of CW magnetrons for HEP and ADS accelerators”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR30, unpublished.
- G. E. Danby and J. W. Jackson, “Static and Dynamic Magnetic End Effects and Correction Magnets for the AGS Booster”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 381-384.
- J. Bengtsson, D. Briggs, and M. Meddahi, “Six-Dimensional Modeling of Coherent Bunch Instabilities and Related Feedback Systems in Storage Rings with Power-Series Maps for the Lattice”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1084-1087.
- N. Samadi, L. D. Chapman, and L. O. Dallin, “A Vertical Phase Space Beam Position and Emittance Monitor for Synchrotron Radiation”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 186-189.
- J. Neilson, V. A. Dolgashev, and S. G. Tantawi, “Design of an RF Feed System for Standing-wave Accelerator Structures”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC072, pp. 244-246.
- H. Reymond, M. F. Gomez De La Cruz, I. T. Matasaho, and A. Rijllart, “The Control System of the CERN Platform for the Test of the High Luminosity LHC Superconducting Magnets”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 918-922.
- A. Ts. Amatuni et al., “The Yerevan Electron Accelerator: Status and Development”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 406-409.
- J. J. Song, P. J. Matthews, and J. Zhou, “Longitudinal Coupling Impedance of a Bellows and a Ceramic Gap in a Circular Beam Pipe for the Advanced Photon Source”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1336-1339.
- R. Frankel, “Variable Mode Solid State Magnet Cycle Timer”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 427-430.
- I. Yamane and Y. Yamaguchi, “Stripping Carbon Foils for H-Charge-Exchange Injection into the KEK-PS Booster”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1948-1951.
- U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper THM2IS03, pp. 308-308.
- J. Buon, P. Puzo, J. Jeanjean, F. Le Diberder, V. Lepeltier, and B. Delcourt, “The Orsay Spot Size Monitor for the Final Focus Test Beam”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2513-2516.
- J. Y. Lee et al., “Design of 1.5 GeV Compact Storage Ring for the EUV and Soft X-rays”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1028-1030.
- L. Bandiera et al., “Study and optimization of an hybrid crystal-based positron source for the FCC-ee”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA085, unpublished.
- D.Pestrikov, “COLLECTIVE BEAM-BEAM INSTABILITIES OF BUNCHES WITH TUNESPREADS”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper TUACH06, pp. XX-XX.
- J. C. Brown and B. G. Chidley, “A High Power RF Supply for the Chalk River 100% Duty Factor Alvarez Linac”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper E10, pp. 296-299.
- M. J. Syphers and A. Narayanan, “Sensitivity Analyses of All-Electric Storage Ring Designs”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1148-1151.
- M. Popovic et al., “Development and Testing of High Power CW 1497 MHz Magnetron”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1351-1353.
- M. Abs, J. M. Capdevila, T. Delvigne, F. Genin, Y. Jongen, and A. Nguyen, “RHODOTRON Accelerators for Industrial Electron-Beam Processing: A Progress Report”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP076G, pp. 2687-2692.
- F. Bordry and A. Dupaquier, “High Current, Low Voltage Power Converters for LHC. Present Development Directions”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP009G, pp. 2314-2316.
- R. D?Âlling, “Progress of the Diagnostics at the Proscan Beam Lines”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC23, pp. 361-363.
- S. J. Park, Y. J. Park, J. H. Hwang, S.-G. Shin, S. Y. Hyun, and D. H. Yu, “Electron-beam Matching to Solenoid Magnetic Field in a Klystron”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 534-536.
- Y. L. Xu et al., “Phase Extraction and Stabilization for Coherent Pulse Stacking”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4895-4897.
- E. Trakhtenberg et al., “LCLS Undulator Production”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN100, pp. 1148-1150.
- A. V. Mishin, H. DeRuyter, T. Roumbanis, and R. G. Schonberg, “Intraoperative X-band Accelerator Microwave Structure Design”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2185-2188.
- J. M. Potter, “An RF Power Manifold for the Radio Frequency Quadrupole Linear Accelerator”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S3-2, pp. 138-143.
- R. Kustom, A. Nassiri, K. J. Suthar, and G. J. Waldschmidt, “Dielectrically-Loaded Waveguide as a Short Period Superconducting Microwave Undulator”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 897-900.
- M. W. U. Van Dijk et al., “The K12 Beamline for the KLEVER Experiment”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3726-3729.
- O. Hensler, “Controls Architecture for the Diagnostic Devices at the European XFEL”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THCC02, pp. 121-123.
- S. J. Gessner, E. Adli, F.-J. Decker, M. J. Hogan, T. O. Raubenheimer, and A. Scheinker, “Longitudinal Phase Space Dynamics with Novel Diagnostic Techniques at FACET”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA069, pp. 1865-1867.
- W. H?Âfle et al., “LHC Transverse Feedback System and its Hardware Commissioning”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC121, pp. 3266-3268.
- P. Xydi et al., “Main Field Tracking Measurement in the LHC Superconducting Dipole and Quadrupole Magnets”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD034, pp. 2485-2487.
- I. Yamane, S. Hiramatsu, M. Kihara, N. Kumagai, and E. Takasaki, “Performance Improvement of the KEK PS-Booster Synchrotron”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 301-304.
- Yu. A. Rogovsky and I. Nesterenko, “Calibration of the Electrostatic Beam Position Monitors for VEPP-2000”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUPSA028, pp. 98-100.
- V. A. Dolgashev et al., “Status of X-band Standing Wave Structure Studies at SLAC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB031, pp. 1264-1266.
- A. Kanareykin et al., “Simulations and Measurements of Beam Breakup in Dielectric Wakefield Structures”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC081, pp. 1904-1906.
- E. Keil and A. M. Sessler, “Muon Acceleration in FFAG Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WOAB010, pp. 414-416.
Back to search