Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. M. Cousineau et al., “Status of Preparations for a 10 us H- Laser-Assisted Stripping Experiment”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper WEO3AB02, pp. 299-303.
[n] M. Blaskiewicz et al., “RF System for the SNS Accumulator Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAA007, pp. 490-494.
[n] T. Tanaka et al., “Status of Ramp;D for SCSS Project”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP018, pp. XX-XX.
[n] B. Bravo et al., “Calibration of the Acceleration Voltage of Six Normal Conducting Cavities at ALBA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3036-3038. doi:10.18429/JACoW-IPAC2015-WEPMN049
[n] V. Kovaltsov et al., “Upgrading of the Beam Diagnostic System of U-70 Beam Transfer Lines”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP005, pp. XX-XX.
[n] K. M. Hock and A. Wolski, “Effect of Fill Patterns on Extraction Jitter in Damping Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP051, pp. 664-666.
[n] B. Bravo, J. M. Alvarez, F. Perez, and A. Salom, “1.5 GHz Cavity Design for the CLIC Damping Ring and as Active Third Harmonic Cavity for ALBA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4263-4265. doi:10.18429/JACoW-IPAC2017-THPIK078
[n] S. Yaramyshev et al., “Upgrade of the HIT Injector LINAC-Frontend”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper TH-09, pp. 183-187.
[n] J. M. Brennan et al., “Design of Ferrite Loaded High Voltage Barrier Cavity”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP22G, pp. 1829-1831.
[n] M. A. Allen and P. B. Wilson, “Linac-Type RF Structures for High Energy Storage Rings”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper J04, pp. 279-282.
[n] G. V. Stupakov, “Effect of Coulomb Collisions on Echo-Enabled Harmonic Generation (EEHG)”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPB20, pp. 49-52.
[n] C. Christou et al., “Progress With the Diamond Light Source RF Upgrade”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4358-4361. doi:10.18429/JACoW-IPAC2017-THPIK112
[n] M. A. Allen and L. G. Karvonen, “High Duty Factor Structures for e+e- Storage Rings”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper C12, pp. 175-178.
[n] B. Bravo, F. Mares, and F. Perez, “CoStub: A 6 1/8'' Coaxial Short Circuit using Stubs”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI049, pp. 2809-2811.
[n] G. Berden et al., “Chirped-Laser Based Electron Bunch Length Monitor”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAB008, pp. 519-523.
[n] Y. M. Nosochkov et al., “Dark Sector Experiments at LCLS-II (DASEL) Accelerator Design”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2008-2011. doi:10.18429/JACoW-IPAC2017-TUPIK121
[n] K. M. Hock, A. Wolski, and R. Appleby, “Applying the 'Simple Accelerator Modelling in Matlab' (SAMM) Code to High Luminosity LHC Upgrade”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA077, pp. 2690-2692.
[n] M. A. Allen, Z. D. Farkas, H. A. Hogg, E. W. Hoyt, and P. B. Wilson, “Superconducting Niobium Cavity Measurements at SLAC”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 168-173.
[n] C. Christou, J. Kay, and R. Bartolini, “Tuning of the Injector System to Match Possible Lattice Upgrades at Diamond Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA069, pp. 243-245.
[n] B. Bravo, F. Mares, F. Perez, P. Sanchez, and M. L. Langlois, “CaCo: A Cavity Combiner for IOTs Amplifiers”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC046, pp. 181-183.
For LaTeX
Use Complete Form
For BibTeX
References
- S. M. Cousineau et al., “Status of Preparations for a 10 us H- Laser-Assisted Stripping Experiment”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper WEO3AB02, pp. 299-303.
- M. Blaskiewicz et al., “RF System for the SNS Accumulator Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAA007, pp. 490-494.
- T. Tanaka et al., “Status of Ramp;D for SCSS Project”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP018, pp. XX-XX.
- B. Bravo et al., “Calibration of the Acceleration Voltage of Six Normal Conducting Cavities at ALBA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3036-3038.
- V. Kovaltsov et al., “Upgrading of the Beam Diagnostic System of U-70 Beam Transfer Lines”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP005, pp. XX-XX.
- K. M. Hock and A. Wolski, “Effect of Fill Patterns on Extraction Jitter in Damping Rings”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP051, pp. 664-666.
- B. Bravo, J. M. Alvarez, F. Perez, and A. Salom, “1.5 GHz Cavity Design for the CLIC Damping Ring and as Active Third Harmonic Cavity for ALBA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4263-4265.
- S. Yaramyshev et al., “Upgrade of the HIT Injector LINAC-Frontend”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper TH-09, pp. 183-187.
- J. M. Brennan et al., “Design of Ferrite Loaded High Voltage Barrier Cavity”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP22G, pp. 1829-1831.
- M. A. Allen and P. B. Wilson, “Linac-Type RF Structures for High Energy Storage Rings”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper J04, pp. 279-282.
- G. V. Stupakov, “Effect of Coulomb Collisions on Echo-Enabled Harmonic Generation (EEHG)”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOPB20, pp. 49-52.
- C. Christou et al., “Progress With the Diamond Light Source RF Upgrade”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4358-4361.
- M. A. Allen and L. G. Karvonen, “High Duty Factor Structures for e+e- Storage Rings”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper C12, pp. 175-178.
- B. Bravo, F. Mares, and F. Perez, “CoStub: A 6 1/8'' Coaxial Short Circuit using Stubs”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI049, pp. 2809-2811.
- G. Berden et al., “Chirped-Laser Based Electron Bunch Length Monitor”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAB008, pp. 519-523.
- Y. M. Nosochkov et al., “Dark Sector Experiments at LCLS-II (DASEL) Accelerator Design”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2008-2011.
- K. M. Hock, A. Wolski, and R. Appleby, “Applying the 'Simple Accelerator Modelling in Matlab' (SAMM) Code to High Luminosity LHC Upgrade”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA077, pp. 2690-2692.
- M. A. Allen, Z. D. Farkas, H. A. Hogg, E. W. Hoyt, and P. B. Wilson, “Superconducting Niobium Cavity Measurements at SLAC”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 168-173.
- C. Christou, J. Kay, and R. Bartolini, “Tuning of the Injector System to Match Possible Lattice Upgrades at Diamond Light Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA069, pp. 243-245.
- B. Bravo, F. Mares, F. Perez, P. Sanchez, and M. L. Langlois, “CaCo: A Cavity Combiner for IOTs Amplifiers”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC046, pp. 181-183.
Back to search