Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. J. Nawrocky, J. Galayda, D. Klein, O. Singh, and L. H. Yu, “Automatic Steering of X-Ray Beams from NSLS Insertion Devices Using Closed Orbit Feedback”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1856-1859.
[n] D. Liska et al., “Mechanical Design of the High-Energy Beam-Transport Line for the FMIT 2-MeV Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2824-2827.
[n] M. P. Kepinski et al., “TREC: Traceability of Radioactive Equipment at CERN”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA042, pp. 3234-3236.
[n] L. Tkachenko et al., “A Possibility of Development of Superconducting Dipole for Fast-Cycling Magnetic Fields”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE005, pp. 2436-2438.
[n] M. A. Fraser et al., “Modelling the Radioactivity Induced by Slow-Extraction Losses in the CERN SPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1897-1900. doi:10.18429/JACoW-IPAC2017-TUPIK086
[n] A. W. Grau et al., “In-vacuum, Cryogen-free Field Measurement System for Superconducting Undulator Coils”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP067, pp. 714-716.
[n] H. V. Smith, P. Allison, and J. Sherman, “Pulsed H Beams from Penning SPS Sources Equipped with Circular Emitters”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-47, pp. 164-166.
[n] C. Peters et al., “Design and Performance of 40mm, 6.5 T, Collared, Cold-Iron Model Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3728-3731.
[n] P. K. Sigg, J. Cherix, H. R. Fitze, H. Frei, M. M?ñrki, and U. Schryber, “Invited Paper: High Beam Power RF-Systems for Cyclotrons”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-01, pp. 161-168.
[n] X. Y. Zhang et al., “Preliminary Design of 325 MHz Half-Wave Resonator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO025, pp. 2369-2371.
[n] Y. Cho, T. K. Khoe, J. Moenich, and L. G. Ratner, “A Cold-Bore Vacuum System Design for POPAE”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1293-1296.
[n] U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Post-Processing of Nb3Sn Coated Nb”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1190-1193. doi:10.18429/JACoW-IPAC2017-MOPVA144
[n] D. J. Wang, C. K. Kuan, H. C. Ho, S. Y. Perng, and J. R. Chen, “Mechanical Improvement in Beam Stability at NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOM201, pp. XX-XX.
[n] F. Valentini, T. Ladzinski, P. Ninin, and L. Scibile, “Safety Testing for LHC Access System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD037, pp. 532-534.
[n] K. M. Terwilliger, “Orbit Dynamics for a Four-Spiral-Sector Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A16, pp. 73-75.
[n] G. Parzen, “Theory of the Tune Shift Due to Linear Coupling”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 658-661.
[n] N. Carmignani et al., “Lifetime Improvements with a Harmonic RF System for the ESRF EBS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1644-1647. doi:10.18429/JACoW-IPAC2016-TUPOR001
[n] D. Z. Chen et al., “Progress of the RF Negative Ion Source Research at HUST”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 430-432. doi:10.18429/JACoW-IPAC2014-MOPME024
[n] V. A. Anferov et al., “Siberian Snake Experiments at the IUCF Cooler Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEDR1, pp. 392-394.
[n] P. Wanderer et al., “Initial Test of a Fast-Ramped Superconducting Model Dipole for GSI's Proposed SIS200 Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB054, pp. 2162-2164.
[n] Th. J. M. Sluyters, R. Damm, and A. Otis, “A Single Pulse Transverse Phase Space Beam Analyser”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1143-1151.
[n] H. Vernon Smith, P. Allison, K. Saadatmand, and J. David Schneider, “Spatial Distributions of the Emitting Species in a Penning Surface-Plasma Source”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 659-662.
[n] G. Baribaud et al., “The LEP Beam Orbit Measurement System: Status and Running-in Results”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 137-140.
[n] G. Kim, H.-S. Kang, C. Kim, B. G. Oh, and D. C. Shin, “Wire Scanner Measurements at the PAL-XFEL”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 445-447. doi:10.18429/JACoW-IBIC2018-WEPB09
[n] P. Koert, S. Eckhouse, A. Fisher, and N. Rostoker, “Design Criteria for Modified Elongated Betatron Systems”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 972-975.
[n] D. J. Ciardullo et al., “The AGS Booster Beam Position Monitor System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1347-1350.
[n] C. C. Friedrichs, B. M. Campbell, and L. Walling, “Design of an Accelerating Cavity for the Superconducting Super Collider Low-Energy Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1020-1023.
[n] G. Parzen, “Calculating Orbit Properties of F-F Cyclotrons”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A09, pp. 40-44.
[n] N. K. Mahale and A. Furman, “Debunching and Capture in the LEB for the SSC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 386-389.
[n] D. J. Clark, “Invited Paper: Cyclotrons as Mass Spectrometers”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper L03, pp. 534-539.
[n] N. Hafz, D.-K. Ko, and J. Lee, “Generation of Stable GeV-class Electron Beams from Laser-Plasmas and their Applications in Compact FELs”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THCAU05, pp. 521-523.
[n] S. Kuzikov, “A cryogenic dielectric pulse compressor”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 119-122. doi:10.18429/JACoW-LINAC2024-MOPB035
[n] R. Frankel and I. E. Pyros, “Computer Interface Design between a Master Computer and a Slave Computer for Simulation Control and Instrumentation Monotoring of the Brookhaven 200 MeV Linac Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 412-414.
[n] H. Takeda and J. Billen, “Recent Improvements in the PARMILA Code”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG028, pp. 3518-3520.
[n] A. A. Sulimov, V. Gubarev, and S. Yasar, “RF Aspects of Quality Control for Industrial XFEL Cavities Fabrication”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP052, pp. 237-239.
For LaTeX
Use Complete Form
For BibTeX
References
- R. J. Nawrocky, J. Galayda, D. Klein, O. Singh, and L. H. Yu, “Automatic Steering of X-Ray Beams from NSLS Insertion Devices Using Closed Orbit Feedback”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1856-1859.
- D. Liska et al., “Mechanical Design of the High-Energy Beam-Transport Line for the FMIT 2-MeV Accelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2824-2827.
- M. P. Kepinski et al., “TREC: Traceability of Radioactive Equipment at CERN”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA042, pp. 3234-3236.
- L. Tkachenko et al., “A Possibility of Development of Superconducting Dipole for Fast-Cycling Magnetic Fields”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE005, pp. 2436-2438.
- M. A. Fraser et al., “Modelling the Radioactivity Induced by Slow-Extraction Losses in the CERN SPS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1897-1900.
- A. W. Grau et al., “In-vacuum, Cryogen-free Field Measurement System for Superconducting Undulator Coils”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP067, pp. 714-716.
- H. V. Smith, P. Allison, and J. Sherman, “Pulsed H Beams from Penning SPS Sources Equipped with Circular Emitters”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-47, pp. 164-166.
- C. Peters et al., “Design and Performance of 40mm, 6.5 T, Collared, Cold-Iron Model Magnets”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3728-3731.
- P. K. Sigg, J. Cherix, H. R. Fitze, H. Frei, M. M?ñrki, and U. Schryber, “Invited Paper: High Beam Power RF-Systems for Cyclotrons”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-01, pp. 161-168.
- X. Y. Zhang et al., “Preliminary Design of 325 MHz Half-Wave Resonator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO025, pp. 2369-2371.
- Y. Cho, T. K. Khoe, J. Moenich, and L. G. Ratner, “A Cold-Bore Vacuum System Design for POPAE”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1293-1296.
- U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Post-Processing of Nb3Sn Coated Nb”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1190-1193.
- D. J. Wang, C. K. Kuan, H. C. Ho, S. Y. Perng, and J. R. Chen, “Mechanical Improvement in Beam Stability at NSRRC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOM201, pp. XX-XX.
- F. Valentini, T. Ladzinski, P. Ninin, and L. Scibile, “Safety Testing for LHC Access System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD037, pp. 532-534.
- K. M. Terwilliger, “Orbit Dynamics for a Four-Spiral-Sector Cyclotron”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A16, pp. 73-75.
- G. Parzen, “Theory of the Tune Shift Due to Linear Coupling”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 658-661.
- N. Carmignani et al., “Lifetime Improvements with a Harmonic RF System for the ESRF EBS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1644-1647.
- D. Z. Chen et al., “Progress of the RF Negative Ion Source Research at HUST”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 430-432.
- V. A. Anferov et al., “Siberian Snake Experiments at the IUCF Cooler Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEDR1, pp. 392-394.
- P. Wanderer et al., “Initial Test of a Fast-Ramped Superconducting Model Dipole for GSI's Proposed SIS200 Accelerator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB054, pp. 2162-2164.
- Th. J. M. Sluyters, R. Damm, and A. Otis, “A Single Pulse Transverse Phase Space Beam Analyser”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1143-1151.
- H. Vernon Smith, P. Allison, K. Saadatmand, and J. David Schneider, “Spatial Distributions of the Emitting Species in a Penning Surface-Plasma Source”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 659-662.
- G. Baribaud et al., “The LEP Beam Orbit Measurement System: Status and Running-in Results”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 137-140.
- G. Kim, H.-S. Kang, C. Kim, B. G. Oh, and D. C. Shin, “Wire Scanner Measurements at the PAL-XFEL”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 445-447.
- P. Koert, S. Eckhouse, A. Fisher, and N. Rostoker, “Design Criteria for Modified Elongated Betatron Systems”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 972-975.
- D. J. Ciardullo et al., “The AGS Booster Beam Position Monitor System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1347-1350.
- C. C. Friedrichs, B. M. Campbell, and L. Walling, “Design of an Accelerating Cavity for the Superconducting Super Collider Low-Energy Booster”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1020-1023.
- G. Parzen, “Calculating Orbit Properties of F-F Cyclotrons”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A09, pp. 40-44.
- N. K. Mahale and A. Furman, “Debunching and Capture in the LEB for the SSC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 386-389.
- D. J. Clark, “Invited Paper: Cyclotrons as Mass Spectrometers”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper L03, pp. 534-539.
- N. Hafz, D.-K. Ko, and J. Lee, “Generation of Stable GeV-class Electron Beams from Laser-Plasmas and their Applications in Compact FELs”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper THCAU05, pp. 521-523.
- S. Kuzikov, “A cryogenic dielectric pulse compressor”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 119-122.
- R. Frankel and I. E. Pyros, “Computer Interface Design between a Master Computer and a Slave Computer for Simulation Control and Instrumentation Monotoring of the Brookhaven 200 MeV Linac Accelerator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 412-414.
- H. Takeda and J. Billen, “Recent Improvements in the PARMILA Code”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAG028, pp. 3518-3520.
- A. A. Sulimov, V. Gubarev, and S. Yasar, “RF Aspects of Quality Control for Industrial XFEL Cavities Fabrication”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP052, pp. 237-239.
Back to search