Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Vandoni, S. Blanchard, P. Chiggiato, and K. Radwan, “The HIE-Isolde Vacuum System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2372-2374. doi:10.18429/JACoW-IPAC2014-WEPME046
[n] D. J. Harding et al., “A Wide Aperture Quadrupole for the Fermilab Main Injector Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS008, pp. 455-457.
[n] D. J. Harding et al., “Design Considerations and Prototype Performance of the Fermilab Main Injector Dipole”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2477-2480.
[n] A. Hofmann, K. Hubner, and B. Zotter, “A Computer Code for the Calculation of Beam Stability in Circular Electron Machines”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3514-3517.
[n] Yu. V. Korotaev, I. N. Meshkov, S. V. Mironov, A. O. Sidorin, and E. Syresin, “The Low Energy Positron Storage Ring for Positronium Generation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP07B, pp. 853-855.
[n] L. H. Chang, M. C. Lin, G. H. Luo, and Ch. Wang, “Calculation of the Maximum Stored Beam Current Considering the Phase Noise of a Generator RF Signal”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG034, pp. 2670-2672.
[n] I. M. Karnaukhov et al., “Status of Kharkov X-ray Generator NESTOR Based on Compton Back Scattering”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC047, pp. 175-177.
[n] R. Frankel and C. Salwen, “Advanced Concepts in Accelerator Timing Control”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1087-1090.
[n] L. Xiao, D. Tong, H. Zhang, S. Hu, and Y. Lin, “Measurements of Higher Order Mode in an X-Band Accelerator”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D040, pp. 181-183.
[n] D. Olsen, “Status of the SNS Project”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUM401, pp. XX-XX.
[n] J. Delayen, “Superconducting Accelerating Structures for High-Current Ion Beams”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-60, pp. 199-201.
[n] C. Crouzel, D. Comar, C. Kellershohn, R. Knipper, C. Le Poec, and C. Sejourne, “Installation of a Compact Variable Energy Cyclotron in a Hospital and Preliminary Results Obtained”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper F-08, pp. 440-443.
[n] Yu. V. Korotaev, I. N. Meshkov, S. V. Mironov, A. O. Sidorin, and E. Syresin, “The Modified Betatron Prototype Dedicated to Electron Cooling”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP06J, pp. 1061-1063.
[n] J. Snuverink, J. Pfingstner, and D. Schulte, “Recent Improvements in the Orbit Feedback and Ground Motion Mitigation Techniques for CLIC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR028, pp. 1876-1878.
[n] N. Kikuzawa, R. Nagai, M. Sawamura, N. Nishimori, E. Minehara, and Y. Suzuki, “Performance of Compact Refrigerators System for SRF Cavities in the JAERI FEL”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C40, pp. 769-773.
[n] J. W. Younger and K. W. Sides, “A 10 MW Linear Modulator with 500 kHz Frequency Response”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 529-533.
[n] A. Sargsyan, V. Sahakyan, G. S. Zanyan, and W. Decking, “New BBA Algorithm for Electron Beam Orbit Steering in Linear Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1650-1652. doi:10.18429/JACoW-IPAC2014-TUPRI040
[n] F. Le Pimpec, R. Ganter, C. Gough, C. P. Hauri, and M. Paraliev, “Comparison of High Gradient Achievement for Different Metals in DC and Pulsed DC Mode”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH001, pp. 227-230.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Vandoni, S. Blanchard, P. Chiggiato, and K. Radwan, “The HIE-Isolde Vacuum System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2372-2374.
- D. J. Harding et al., “A Wide Aperture Quadrupole for the Fermilab Main Injector Synchrotron”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS008, pp. 455-457.
- D. J. Harding et al., “Design Considerations and Prototype Performance of the Fermilab Main Injector Dipole”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2477-2480.
- A. Hofmann, K. Hubner, and B. Zotter, “A Computer Code for the Calculation of Beam Stability in Circular Electron Machines”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3514-3517.
- Yu. V. Korotaev, I. N. Meshkov, S. V. Mironov, A. O. Sidorin, and E. Syresin, “The Low Energy Positron Storage Ring for Positronium Generation”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP07B, pp. 853-855.
- L. H. Chang, M. C. Lin, G. H. Luo, and Ch. Wang, “Calculation of the Maximum Stored Beam Current Considering the Phase Noise of a Generator RF Signal”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG034, pp. 2670-2672.
- I. M. Karnaukhov et al., “Status of Kharkov X-ray Generator NESTOR Based on Compton Back Scattering”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC047, pp. 175-177.
- R. Frankel and C. Salwen, “Advanced Concepts in Accelerator Timing Control”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1087-1090.
- L. Xiao, D. Tong, H. Zhang, S. Hu, and Y. Lin, “Measurements of Higher Order Mode in an X-Band Accelerator”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D040, pp. 181-183.
- D. Olsen, “Status of the SNS Project”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUM401, pp. XX-XX.
- J. Delayen, “Superconducting Accelerating Structures for High-Current Ion Beams”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-60, pp. 199-201.
- C. Crouzel, D. Comar, C. Kellershohn, R. Knipper, C. Le Poec, and C. Sejourne, “Installation of a Compact Variable Energy Cyclotron in a Hospital and Preliminary Results Obtained”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper F-08, pp. 440-443.
- Yu. V. Korotaev, I. N. Meshkov, S. V. Mironov, A. O. Sidorin, and E. Syresin, “The Modified Betatron Prototype Dedicated to Electron Cooling”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP06J, pp. 1061-1063.
- J. Snuverink, J. Pfingstner, and D. Schulte, “Recent Improvements in the Orbit Feedback and Ground Motion Mitigation Techniques for CLIC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR028, pp. 1876-1878.
- N. Kikuzawa, R. Nagai, M. Sawamura, N. Nishimori, E. Minehara, and Y. Suzuki, “Performance of Compact Refrigerators System for SRF Cavities in the JAERI FEL”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C40, pp. 769-773.
- J. W. Younger and K. W. Sides, “A 10 MW Linear Modulator with 500 kHz Frequency Response”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 529-533.
- A. Sargsyan, V. Sahakyan, G. S. Zanyan, and W. Decking, “New BBA Algorithm for Electron Beam Orbit Steering in Linear Accelerators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1650-1652.
- F. Le Pimpec, R. Ganter, C. Gough, C. P. Hauri, and M. Paraliev, “Comparison of High Gradient Achievement for Different Metals in DC and Pulsed DC Mode”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH001, pp. 227-230.
Back to search