JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	P. Muggli, “The AWAKE Proton-Driven Plasma Wakefield Acceleration Experiment at CERN”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOOBB1, pp. 72-74. 
[n]	E. W. Nissen, “The Beam-Beam Effect and Its Consequences for the Modeling of the Jefferson Lab EIC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3909-3911. doi:10.18429/JACoW-IPAC2017-THPAB082
[n]	A. Migliori, D. W. Reagor, D. E. Peterson, J. O. Willis, Z. Fisk, and R. C. Smith, “RF and Microwave Measurements at Los Alamos on Oxide Superconductors”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87B07, pp. XX-XX. 
[n]	G. Devanz, “A 2D Multipactor Simulation Code for RF Components and Accelerating Cavities”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2A02, pp. 1366-1368. 
[n]	C.-K. Ng and T. Weiland, “Impedance Analysis of the PEP-II Vacuum Chamber”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAB18, pp. 3061-3063. 
[n]	N. Hazewindus, “Some Studies on the Axial Injection System for a Compact Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69G05, pp. XX-XX. 
[n]	T. J. Maxwell, C. L. Bohn, D. Mihalcea, and P. Piot, “Vector Diffraction Theory and Coherent Transition Radiation Interferometry in Electron Linacs”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS035, pp. 4015-4017. 
[n]	G. Lopez, “Quench Simulation Studies of the TAC Jelly Roll Superferric Dipole Corrector Elements for the SSC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2224-2227. 
[n]	B. N. Markov, “The JINR U-400 Isochronous Heavy Ion Cyclotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1215-1218. 
[n]	K. Johnsen, “Experiences in During the Early Running-in Phase of the ISR”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 199-204. 
[n]	S. Posen et al., “Flux Expulsion Variation in SRF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB104, pp. 404-408. 
[n]	J. Wu, “LCLS-II: An Upgrade for the Linac Coherent Light Source”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper TUOBI1, pp. 197-197. 
[n]	N. Barov, “A Low-Voltage Klystron for the ILC and ILC Testing Program”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS083, pp. 2526-2528. 
[n]	W. Liu, W. Gai, and K.-J. Kim, “Systematic Study of Undulator Based ILC Positron Source: Production and Capture”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN090, pp. 2918-2920. 
[n]	V. D. Shiltsev, “Novel ASTA Users Facility at Fermilab: a Testbed for Superconductying RF Technology and ERL R&D”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper WG305, pp. 54-57. 
[n]	D. Husmann, “Review of CW Electron Machines”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 62-67. 
[n]	S. Aderhold, D. Kostin, A. Matheisen, A. Navitski, and D. Reschke, “Analysis of Degraded Cavities in Prototype Modules for the European XFEL”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB090, pp. 355-358. 
[n]	B. C. Yunn, “High Brightness Injectors Based on Photocathode DC Gun”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH070, pp. 2254-2256. 
[n]	C. Tennant, “Modeling Challenges for Energy Recovery Linacs With Long, High Charge Bunches”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3544-3547. doi:10.18429/JACoW-IPAC2018-THPAK129
[n]	E. S. Masunov and A. S. Roshal, “Focusing of Ribbon Beam in Undulator Linear Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W007, pp. 2835-2837. 
[n]	G. Reinhold, “High Voltage DC Power Supplies for Beam Injectors”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 117-119. 
[n]	R. Hajima and T. Tajima, “Beyond the International Linear Collider: Driven by FEL with Energy Recovery at 5-10TeV”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP066, pp. XX-XX. 
[n]	V. M. Panasyuk, M. I. Bryzgunov, A. V. Bubley, V. V. Parkhomchuk, and V. B. Reva, “Matching of Magnetic Field with Energy of Electrons in 2 MeV COSY Cooler”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO07, pp. 110-112. 
[n]	M. Znidarcic, “Spark EL - Single Pass BPM”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 471-473. doi:10.18429/JACoW-FEL2015-TUP044
[n]	T. Higo, “Linear Collider Structures”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper WE1-03, pp. 621-625. 
[n]	R. Li, “Applications of the Cancellation Effect in the CSR Studies”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC009, pp. 208-210. 
[n]	R. McAdams, A. J. T. Holmes, G. Proudfoot, R. F. King, and S. Cox, “Development of Bright Negative Ion Sources at Culham Laboratory”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-12, pp. 636-638. 
[n]	J. Qiao, Y. H. Pu, and X. C. Xie, “The Beam Dynamics Design of the Proton Synchrotron Linear Injector for Proton Therapy”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3167-3169. doi:10.18429/JACoW-IPAC2019-WEPTS031
[n]	P. Krejcik, “Waveguide Stub-Line Tuning of RF Cavities with Heavy Beam Loading”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P027, pp. 3030-3032. 
[n]	G. Reinhold, J. Bill, and K. Truempy, “The Symmetrical Rectifier. An Accelerator Power Supply in the Megavolt and Milliampere Range”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 288-293. 
[n]	Yu. N. Grigor'ev and A.Yu. Zelinsky, “A Mathematical Model for Investigating Chromatic Electron Beam Extraction from a Pulse Stretcher Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA07, pp. 539-541. 
[n]	S. G. Arutunian, “The Particles Scattering on the Hard Part of Synchrotron Radiation in the Accelerators and Storage Rings: The Influence on the Beam Dynamics”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 629-631. 
[n]	P. Zhang et al., “A 166.6 MHz Superconducting RF System for the HEPS Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1049-1051. doi:10.18429/JACoW-IPAC2017-MOPVA079
[n]	L. Liu et al., “Advances in Beam Orbit Stability at the LNLS Electron Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH005, pp. 1924-1926. 
[n]	R. C. Sethi, “Electron Beam Accelerators for Material Processing: A BARC Scenario”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16063, pp. XX-XX. 
[n]	E. Tanabe, M. Bayer, and M. Trail, “A Small Diameter Standing Wave Linear Accelerator Structure”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2975-2978. 
[n]	J. Struckmeier, “Self-Consistent Non-K-V Distributions for Periodic Focusing Systems”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2516-2519. 
[n]	M. Kesselman, “Spallation Neutron Source Beam Current Monitor Electronics”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH102, pp. 2323-2325. 
[n]	W. Lawson, “Space-charge-limited Magnetron Injection Guns for Gyroklystrons”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF055, pp. 1072-1074. 
[n]	A. Dobrosavljevi, M. Raj, N. Gruji, and V. Vujovi, “Spiral Inflector Exchange System Of The Vincy Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 409-411. 
[n]	M. L. Sundquist et al., “Operation of a 3 MeV Ampere Intensity DC Electron Recirculation System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 316-319. 
[n]	J. McKeown, R. T. F. Bird, K. C. D. Chan, S. H. Kidner, and J.-P. Labrie, “High Power, On-Axis Coupled Linac Structure”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper I04, pp. 332-334. 
[n]	G. Tool, “A Fast Digitizer and Display System”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1567-1570. 
[n]	P. Livdahl, “Linac Fabrication Problems”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 14-01, pp. 449-455. 
[n]	J. L. Laclare, “Critical Review of Target Specifications for Third Generation Synchrotron Radiation Light Sources”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 113-116. 
[n]	J. M. Ortega, “Coherent XUV Harmonic ProductionProposals for Synchrotron Light Sources”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3359-3363. 
[n]	K. Saito, “Experimental Formula of the ON-set Level of Two-point Multipacting Over the RF Frequency Range 500 MHz to 1300 MHz”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PR019, pp. 419-422. 
[n]	P. Emma and T. O. Raubenheimer, “Circumference Correction Chicanes for Damping Rings”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA23, pp. 3438-3440. 
[n]	D. Garzella et al., “SRFEL Linewidth Narrowing in the Ultraviolet”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP001, pp. XX-XX. 
[n]	J. A. Holt, “Normal Form Analzsis of the Tevatron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 988-991. 
[n]	C. Birattari et al., “Transverse Beam Measurments using a Compter Based Image Analysis System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1661-1664. 
[n]	D. C. Hagerman, “Los Alamos Meson Factory: Present Status and Future Plans”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper E-002, pp. XX-XX. 
[n]	N. Pichoff and J.-M. Lagniel, “End to End Simulations of the RX2 Beam Transport”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT050, pp. 2595-2597. 
[n]	H. Zen et al., “Status of Top-up Operation in UVSOR-II”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA039, pp. 2576-2578. 
[n]	S. L. Kramer and J. B. Murphy, “Variable Momentum Compaction Lattice Studies”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUBL6, pp. 140-142. 
[n]	R. Grill, W. C. Feuring, W. C. Heraeus GmbH, W. Simader, and B. Spaniol, “Production of High-Purity-Niobium under Industrial Scale for Upcoming Linear Collider Projects”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP001, pp. 1287-1289. 
[n]	Shigeru. Takeda, K. Oide, and Masakazu. Yoshioka. Kikuo. Kudo, “Ground Motion Issue on the Large Accelerator Alignment”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D072, pp. 266-270. 
[n]	J. M. Watson, “The Los Alamos Free-Electron Laser”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3363-3368. 
[n]	J. M. Peterson, “Reduction of Beam Emittance by a Tapered-Foil Technique”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2403-2406. 
[n]	S. Conetti and A. G. Ruggiero, “Storage Ring Filling Via Direct Production of Electron and Positrons by High Energy Protons”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2693-2696. 
[n]	A. N. Fedorova, M. G. Zeitlin, and Z. Parsa, “Wavelet Approach to Accelerator Problems, III. Melnikov Functions and Symplectic Topology”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V006, pp. 1508-1510. 
[n]	A. Vostrikov, A. Grassellino, A. Romanenko, L. Horyn, Y. K. Kim, and T. Murat, “Modifications of Superconducting Properties of Niobium Caused by Nitrogen Doping of Ultra-High Quality Factor Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB027, pp. 144-148. 
[n]	P. F. Tavares, “A Semi-analytical Approach to the Design of Low Energy Cylindrically Symmetric Transport Lines”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ29, pp. 3352-3354. 
[n]	D. K. Bewley, “Medical Uses of Cyclotrons: Treatment and Diagnosis”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper GI-03, pp. 653-660. 
[n]	S. G. Tantawi and C. D. Nantista, “High Power Tests of a Multimode X-Band RF Distribution System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAA008, pp. 482-486. 
[n]	S. R. Douglass, T. F. Godlove, and E. Zaidman, “An Efficient Induction Modulator for the Relativistic Klystron Two Beam Accelerator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH023, pp. 3717-3719. 
[n]	J. S. Cao et al., “Commissioning of C-ADS Injector I”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 348-350. doi:10.18429/JACoW-HB2016-TUPM6Y01
[n]	H. Zaim and G. D. Alton, “Computational Design Studies for an Ion Extraction System for the Oak Ridge National Laboratory ECR Ion Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH016, pp. 2114-2116. 
[n]	T. Tajima, “Laser Beat-Wave Accelerator for Ultra-High Energies”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3209-3212. 
[n]	S. N. Kaplan, C. F. Burrell, R. V. Pyle, L. Ruby, A. S. Schlachter, and J. W. Stearns, “Electron-Spin-Polarized Targets for a Collisionally Pumped Polarized-Ion Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1739-1742. 
[n]	G. LeBlanc and W. Stiefler, “Alignment Procedures for the MAX-II Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP089G, pp. 2606-2608. 
[n]	S. Spampinati et al., “Commissioning of the FERMI@ELETTRA Laser Heater”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD58, pp. 177-180. 
[n]	J. D. Gilpatrick and D. L. Grant, “Multiple-Measurement Beam Probe”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-46, pp. 154-156. 
[n]	Z. D. Farkas, “A New Formulation for Linear Accelerator Design”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3225-3228. 
[n]	Christine Petit-Jean-Genaz, “Implementation of JFPC  Under Linux - A Mechanism to Access Industrial I/Os in a Java/Linux-Environment”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEBT004, pp. XX-XX. 
[n]	J. J. Kritzinger, A. M??ller, and H. A. Smit, “Experience with Electrical Contact Systems for Radio Frequencies at NAC”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-25, pp. 261-264. 
[n]	C. C. Du and J. Q. Wang, “Incoherent Transverse Tune Shift Caused by Space-charge Effects in HEPS Storage Ring and Booster”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 131-133. doi:10.18429/JACoW-SAP2017-TUCH3
[n]	J. D. Gilpatrick, “Highlights from the 2010 Beam Instrumentation Workshop”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUOC01, pp. 297-301. 
[n]	J. P. Sikora, J. A. Crittenden, J. S. Ginsberg, and D. L. Rubin, “Electron Cloud Measurements using Shielded Pickups at CesrTA”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB55, pp. 198-200. 
[n]	Y. Zhao, “A New Structure of Linear Accelerator”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP41C, pp. 785-790. 
[n]	G. Ramian and L. Elais, “High-Current Beam Transport in Electrostatic Accelerator Tubes”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 307-310. 
[n]	Jong-Won Kim, “Effects of Vertical Misalignment of Superconducting Coils in Cyclotrons”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-08, pp. XX-XX. 
[n]	M. Eriksson, L. J. Lindgren, E. Wall n, and S. Werin, “A Combined Injector and FEL Facility at MAX-lab”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP07E, pp. 1468-1470. 
[n]	S. Virostek, D. Oshatz, and J. W. Staples, “A Thermal Analysis Model for High Power Density Beam Stops”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH153, pp. 1577-1579. 
[n]	D. R. Welch, T. C. Genoni, C. L. Olson, and D. V. Rose, “Two-Stream Studies for Heavy Ion Beam Propagation in a Reactor Chamber”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB073, pp. 3165-3167. 
[n]	L. Lager, R. Brand, and J. Maurer, “Artificial Intelligence Techniques for Tuning Linear Induction Accelerators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3082-3085. 
[n]	K. Langbein, “Further Development of the Plasma Beam Ion Source”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1228-1231. 
[n]	J. D. Sedillo and J. D. Gilpatrick, “LANSCE-RM Wire Scanners: SLIP-Encoded Serial Communication for Maintenance Display at the Instrument”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC25, pp. 1196-1198. 
[n]	R. P. Fliller, A. A. Derbenev, T. V. Shaftan, and G. M. Wang, “Top Off Algorithm Development and Commissioning at NSLS-II”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2988-2990. doi:10.18429/JACoW-IPAC2016-WEPOW060
[n]	H. S. Suh et al., “Design, Fabrication, and Performance Tests of Dipole and Quadrupole Magnets for PAL-XFEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP033, pp. 90-92. 
[n]	J. L. Steinmann et al., “Continuous Bunch-by-Bunch Reconstruction of Short Detector Pulses”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2501-2503. doi:10.18429/JACoW-IPAC2019-WEPGW017
[n]	R. Keller, E. Forest, H. Nishimura, and M. S. Zisman, “Study of a Relaxed" ALS Storage Ring Lattice"”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1479-1482. 
[n]	M. Pina and J-L. Paillard, “Cilex-Apollon Synchronization and Security System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC045, pp. 188-190. 
[n]	H. Grote and C. Iselin, “Recent Developments in Mad Version 8”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1682-1685. 
[n]	R. Li and Y. S. Derbenev, “Discussions on the Cancellation Effect on a Curved Orbit”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT019, pp. 1631-1633. 
[n]	M. Olivo, “Beam Diagnostic Equipment for Cyclotrons (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper E-01, pp. 331-340. 
[n]	C. Benvenuti, “Non-Evaporable Getters : from Pumping Strips to Thin Film Coatings”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THZ02A, pp. 200-206. 
[n]	M. R. Cleland, P. R. Hanley, and C. C. Thompson, “Acceleration of Intense Positive Ion Beams at Megavolt Potentials”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 113-117. 
[n]	S. R. Bull, R. H. Hoft, and N. Slaten, “Small Accelerators for Studies in the Application of Neutrons in Bio-Medicine”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 1002-1007. 
[n]	W. J. Gallagher, “Propagation Characteristics of Finite Lengths of Periodic Structures”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1045-1049. 
[n]	W. Mexner, E. Iurchenko, H. Pasic, D. Ressmann, and T. Spangenberg, “A New Flexible Integration of NeXus Datasets to ANKA by Fuse File Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC008, pp. 566-569. 
[n]	T. C. Katsouleas, “Advanced Acceleration Techniques”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 398-404. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search