Favourites
For Word
[n] F. Ames, R. A. Baartman, P. G. Bricault, K. Jayamanna, and A. Mj?©s, “Operation of an ECRIS Charge State Breeder at TRIUMF”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper THYO01, pp. 163-166.
[n] M. Carpinelli et al., “Phase Contrast Imaging Using a Single Picosecond X-ray Pulse of the Inverse Compton Source at the BNL Accelerator Test Facility”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP124, pp. 1062-1064.
[n] H. Kim et al., “Temperature Measurement of Cryomodules”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 299-302. doi:10.18429/JACoW-HB2018-WEP2PO016
[n] M. A. Chaudhri and M. Lee, “Trace Elements Determination in Blank Polystyrene Air Filters by Charged Particle Activation Analysis with a Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper J-13, pp. 612-614.
[n] A. Will et al., “Experimental Setup to Characterize the Radiation Hardness of Cryogenic Bypass Diodes for the HL-LHC Inner Triplet Circuits”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2620-2623. doi:10.18429/JACoW-IPAC2018-WEPMG006
[n] L. Xiao et al., “TTF3 Power Coupler Thermal Analysis for LCLS-II CW Operation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3503-3505. doi:10.18429/JACoW-IPAC2015-WEPWI007
[n] G. Prior, I. Efthymiopoulos, D. V. Neuffer, P. Snopok, C. T. Rogers, and D. Stratakis, “Magnet Misalignment Studies for the Front-end of the Neutrino Factory”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI019, pp. 1373-1375.
[n] S. J. Li, C. H. Li, J. Liu, H. Wang, and Z. Wang, “Design of the Girder Control System for HEPS-TF”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4560-4561. doi:10.18429/JACoW-IPAC2017-THPVA053
[n] X. L. Xu, C.-X. Tang, and Q. Z. Xing, “Design of FEL by the EEHG Scheme at Tsinghua University”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE034, pp. 2218-2220.
[n] E.-S. Kim, J. Bahng, and J. Qiang, “Design Study of the Low Energy Beam Transport System at RISP”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO037, pp. 1955-1957.
[n] J. G. Hwang, E.-S. Kim, and T. Miyajima, “Emittance Minimization by Courant-Snyder Parameter Scan in Merger Section at the Compact Energy Recovery Linear Accelerator.”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPO033, pp. 1506-1508.
[n] Y. I. Levinsen, M. Eshraqi, L. Celona, and L. Neri, “In-depth Analysis and Optimization of the European Spallation Source Front End Lattice”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1274-1277. doi:10.18429/JACoW-IPAC2016-TUPMR020
[n] M. Siano et al., “Two-dimensional electron beam size measurements with X-ray Heterodyne Near Field Speckles”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2594-2598. doi:10.18429/JACoW-IPAC2023-WEYD1
For LaTeX
Use Complete Form
For BibTeX
References
- F. Ames, R. A. Baartman, P. G. Bricault, K. Jayamanna, and A. Mj?©s, “Operation of an ECRIS Charge State Breeder at TRIUMF”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper THYO01, pp. 163-166.
- M. Carpinelli et al., “Phase Contrast Imaging Using a Single Picosecond X-ray Pulse of the Inverse Compton Source at the BNL Accelerator Test Facility”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP124, pp. 1062-1064.
- H. Kim et al., “Temperature Measurement of Cryomodules”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 299-302.
- M. A. Chaudhri and M. Lee, “Trace Elements Determination in Blank Polystyrene Air Filters by Charged Particle Activation Analysis with a Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper J-13, pp. 612-614.
- A. Will et al., “Experimental Setup to Characterize the Radiation Hardness of Cryogenic Bypass Diodes for the HL-LHC Inner Triplet Circuits”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2620-2623.
- L. Xiao et al., “TTF3 Power Coupler Thermal Analysis for LCLS-II CW Operation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3503-3505.
- G. Prior, I. Efthymiopoulos, D. V. Neuffer, P. Snopok, C. T. Rogers, and D. Stratakis, “Magnet Misalignment Studies for the Front-end of the Neutrino Factory”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI019, pp. 1373-1375.
- S. J. Li, C. H. Li, J. Liu, H. Wang, and Z. Wang, “Design of the Girder Control System for HEPS-TF”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4560-4561.
- X. L. Xu, C.-X. Tang, and Q. Z. Xing, “Design of FEL by the EEHG Scheme at Tsinghua University”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE034, pp. 2218-2220.
- E.-S. Kim, J. Bahng, and J. Qiang, “Design Study of the Low Energy Beam Transport System at RISP”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO037, pp. 1955-1957.
- J. G. Hwang, E.-S. Kim, and T. Miyajima, “Emittance Minimization by Courant-Snyder Parameter Scan in Merger Section at the Compact Energy Recovery Linear Accelerator.”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPO033, pp. 1506-1508.
- Y. I. Levinsen, M. Eshraqi, L. Celona, and L. Neri, “In-depth Analysis and Optimization of the European Spallation Source Front End Lattice”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1274-1277.
- M. Siano et al., “Two-dimensional electron beam size measurements with X-ray Heterodyne Near Field Speckles”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEYD1, pp. 2594-2598.
Back to search
