Favourites
For Word
[n] R. Miyamoto et al., “ESS Low Energy Beam Transport Tuning During the First Beam Commissioning Stage”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1046-1049. doi:10.18429/JACoW-IPAC2019-MOPTS084
[n] T. H. Martin, “Design and Performance of the Sandia Laboratories Hermes II Flash X-Ray Generator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 59-64.
[n] Y. Shimosaki et al., “Design Study of High Brilliant Optics at the SPring-8 Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 283-285. doi:10.18429/JACoW-IPAC2014-MOPRO083
[n] S. M. Janssens et al., “Stabilization and Positioning of CLIC Quadrupole Magnets with sub-Nanometre Resolution”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOMMU005, pp. 74-77.
[n] H.-P. Chang, P. J. Chou, C.-C. Kuo, G.-H. Luo, H.-J. Tsai, and M.-H. Wang, “Nonlinear Beam Dynamics of TPS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS063, pp. 3430-3432.
[n] C.-C. Kuo et al., “Design of Taiwan Future Synchrotron Light Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS068, pp. 3445-3447.
[n] B. E. Bolling and N. Milas, “DC Beam Space-Charge Modeling for OpenXAL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3177-3180. doi:10.18429/JACoW-IPAC2019-WEPTS037
[n] T. H. Martin, “A Nominal One-Megavolt, Pulsed Power Generator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 104-106.
[n] J.-C. Huang, C.-S. Yang, P.-S. Chuang, H. Kitamura, and C.-L. Chen, “Cryogenic permanent magnet undulator at high beam currents”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3794-3796. doi:10.18429/JACoW-IPAC2024-THPS26
[n] G.-H. Luo et al., “Feasibility Study of Constant Current Operation at TLS Storage Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF046, pp. 2380-2382.
[n] J.-C. Jan, F.-Y. Lin, Y.-L. Chu, J.-C. Huang, and C.-K. Yang, “Optimizing the magnetic circuit of HTSU through REBCO tape selection”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2895-2899. doi:10.18429/JACoW-IPAC2024-WEPS81
[n] N. Eddy, J. L. Crisp, and M. Hu, “Measurements and Analysis of Beam Transfer Functions in the Fermilab Recycler Ring Using the Transverse Digital Damper System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC117, pp. 3254-3256.
[n] Y. B. Leng, Z. C. Chen, L. W. Lai, Y. B. Yan, and Y. Yang, “Bunch by Bunch DBPM Processor Development and Preliminary Experiment in SSRF”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 984-986. doi:10.18429/JACoW-IPAC2015-MOPTY022
[n] K. Schulte-Urlichs, D. Ondreka, K. Thoma, M. Kirk, and P. Spiller, “GSI electron lens for space charge compensation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3186-3189. doi:10.18429/JACoW-IPAC2024-THPC70
[n] I. C. Sheng, J.-R. Chen, Y. T. Cheng, G.-Y. Hsiung, C. K. Kuan, and C. Y. Yang, “Design of TPS Crotch Absorber”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA079, pp. 1506-1508.
[n] C.-W. Chen, H. Chen, and J.-C. Huang, “Pulsed wire magnetic field measurements for an in-vacuum undulator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1236-1239. doi:10.18429/JACoW-IPAC2023-MOPM111
[n] S. Gerstl et al., “Beam Heat Load Measurements with COLDDIAG at the Diamond Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA006, pp. 2135-2137.
[n] L. W. Lai and Y. B. Leng, “High-Speed Beam Signal Processor for SHINE”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 283-284. doi:10.18429/JACoW-IBIC2019-TUPP004
[n] T. H. Martin, “The Hydra Electron Beam Generator”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 289-294.
[n] C.-C. Kuo et al., “Vertical Beam Size Control in TLS and TPS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS067, pp. 3442-3444.
[n] C.-K. Yang, H.-H. Chen, C.-W. Chen, Y.-Y. Hsu, and F.-Y. Lin, “Kicker magnets for fast-switching elliptical polarized undulators beamline of the TPS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB028, unpublished.
[n] R. J. Raatikainen, K. Osterberg, T. O. Niinikoski, and G. Riddone, “Progress on Modelling of the Thermo-Mechanical Behavior of the CLIC Two-Beam Module”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC018, pp. 1033-1035.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Miyamoto et al., “ESS Low Energy Beam Transport Tuning During the First Beam Commissioning Stage”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1046-1049.
- T. H. Martin, “Design and Performance of the Sandia Laboratories Hermes II Flash X-Ray Generator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 59-64.
- Y. Shimosaki et al., “Design Study of High Brilliant Optics at the SPring-8 Storage Ring”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 283-285.
- S. M. Janssens et al., “Stabilization and Positioning of CLIC Quadrupole Magnets with sub-Nanometre Resolution”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOMMU005, pp. 74-77.
- H.-P. Chang, P. J. Chou, C.-C. Kuo, G.-H. Luo, H.-J. Tsai, and M.-H. Wang, “Nonlinear Beam Dynamics of TPS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS063, pp. 3430-3432.
- C.-C. Kuo et al., “Design of Taiwan Future Synchrotron Light Source”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS068, pp. 3445-3447.
- B. E. Bolling and N. Milas, “DC Beam Space-Charge Modeling for OpenXAL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3177-3180.
- T. H. Martin, “A Nominal One-Megavolt, Pulsed Power Generator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 104-106.
- J.-C. Huang, C.-S. Yang, P.-S. Chuang, H. Kitamura, and C.-L. Chen, “Cryogenic permanent magnet undulator at high beam currents”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS26, pp. 3794-3796.
- G.-H. Luo et al., “Feasibility Study of Constant Current Operation at TLS Storage Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF046, pp. 2380-2382.
- J.-C. Jan, F.-Y. Lin, Y.-L. Chu, J.-C. Huang, and C.-K. Yang, “Optimizing the magnetic circuit of HTSU through REBCO tape selection”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS81, pp. 2895-2899.
- N. Eddy, J. L. Crisp, and M. Hu, “Measurements and Analysis of Beam Transfer Functions in the Fermilab Recycler Ring Using the Transverse Digital Damper System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC117, pp. 3254-3256.
- Y. B. Leng, Z. C. Chen, L. W. Lai, Y. B. Yan, and Y. Yang, “Bunch by Bunch DBPM Processor Development and Preliminary Experiment in SSRF”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 984-986.
- K. Schulte-Urlichs, D. Ondreka, K. Thoma, M. Kirk, and P. Spiller, “GSI electron lens for space charge compensation”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC70, pp. 3186-3189.
- I. C. Sheng, J.-R. Chen, Y. T. Cheng, G.-Y. Hsiung, C. K. Kuan, and C. Y. Yang, “Design of TPS Crotch Absorber”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA079, pp. 1506-1508.
- C.-W. Chen, H. Chen, and J.-C. Huang, “Pulsed wire magnetic field measurements for an in-vacuum undulator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM111, pp. 1236-1239.
- S. Gerstl et al., “Beam Heat Load Measurements with COLDDIAG at the Diamond Light Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA006, pp. 2135-2137.
- L. W. Lai and Y. B. Leng, “High-Speed Beam Signal Processor for SHINE”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 283-284.
- T. H. Martin, “The Hydra Electron Beam Generator”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 289-294.
- C.-C. Kuo et al., “Vertical Beam Size Control in TLS and TPS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS067, pp. 3442-3444.
- C.-K. Yang, H.-H. Chen, C.-W. Chen, Y.-Y. Hsu, and F.-Y. Lin, “Kicker magnets for fast-switching elliptical polarized undulators beamline of the TPS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB028, this conference.
- R. J. Raatikainen, K. Osterberg, T. O. Niinikoski, and G. Riddone, “Progress on Modelling of the Thermo-Mechanical Behavior of the CLIC Two-Beam Module”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC018, pp. 1033-1035.
Back to search