Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Ohnishi et al., “Dynamic Aperture Optimization in SuperKEKB”, in Proc. HF'14, Beijing, China, Oct. 2014, paper FRT1B2, pp. 73-78.
[n] A. Kilicgedik et al., “RF Measurements and Tuning of the Test Module of 800 MHz Radio-Frequency Quadrupole”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 438-440. doi:10.18429/JACoW-LINAC2022-TUPOPA12
[n] J. W. McKenzie and B. L. Militsyn, “A Velocity Bunching Scheme for Creating Sub-picosecond Electron Bunches from an RF Photocathode Gun”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC132, pp. 3194-3196.
[n] A. V. Bogomyagkov, E. B. Levichev, and P. A. Piminov, “Interaction Region Design of Super-CT-Factory in Novosibirsk”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP071, pp. 2264-2266.
[n] R. Corsini, F. Tecker, P. Urschütz, H.-H. Braun, S. Doebert, and E. Jensen, “Efficient Long-Pulse, Fully Loaded CTF3 Linac Operation”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP002, pp. 31-33.
[n] P. Craievich, M. Petronio, and R. Vescovo, “Deflecting Mode Optimization for a High Energy Beam Diagnostic Tool”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP063, pp. 4096-4098.
[n] K. R. Lauer, D. B. Allan, and T. A. Caswell, “caproto: An EPICS Channel Access Interface in Pure Python”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WESH4001, pp. XX-XX.
[n] P. W. Allison, C. R. Emigh, and R. R. Stevens, “The Injector Complex for the LAMPF Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 135-140.
[n] K. Torgasin et al., “Coaxial Quarter Wavelength Impedance Converter for Coupling Control of Triode Cavity”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 689-691. doi:10.18429/JACoW-RUPAC2016-THPSC067
[n] J. M. Haughian and R. M. Main, “An Inexpensive Method of Cooling an RF Cavity”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 395-397.
[n] V. G. Dudnikov and C. M. Ankenbrandt, “Beam Brightness Booster with Charge Exchange Injection and Superintense Circulating Beams Production”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP016, pp. 844-846.
[n] A. P. Kaan, J. F. J. van den Brand, M. Doets, E. van Leeuwen, and O. Postma, “Internal Gas Targets in AmPS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P019, pp. 3630-3632.
[n] N. Solyak et al., “HOM Coupler Performance in CW Regime in Horizontal and Vertical Tests”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB089, pp. 1349-1353.
[n] A. H. Lumpkin, W. J. Berg, M. Borland, J. W. Lewellen, and N. S. Sereno, “Initial CTR-Based Bunch Length Measurements of Linac Beams Following the APS Bunch Compressor”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB005, pp. 2420-2422.
[n] Y. Kim et al., “New Generation Digital Longitudinal Feedback System for Duke FEL and HIGS Facilities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS037, pp. 518-520.
[n] S. Fujishima, H. Okuno, T. Tominaka, A. Goto, and Y. Yano, “Design of the Injection and Extraction Systems for the RIKEN SRC”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P1-13, pp. XX-XX.
[n] K. Tian, J. J. Sebek, and J. L. Vargas, “Investigation of Transverse Beam Instability Induced by an In-vacuum Undulator at SPEAR3”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 31-34. doi:10.18429/JACoW-IBIC2016-MOPG03
[n] C. A. Swoboda, R. E. Daniels, H. C. Lau, and A. Tummillo, “PRIMET: A Versatile Accelerator Timing System”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 653-656.
[n] J.-B. Lagrange et al., “nuSTORM FFAG Decay Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3369-3371. doi:10.18429/JACoW-IPAC2016-THPMB053
[n] S. Hirlaender et al., “LEIR Injection Efficiency Studies as a Function of the Beam Energy Distribution from Linac3”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 758-760. doi:10.18429/JACoW-IPAC2018-TUPAF034
[n] G. Hoffstaetter et al., “Progress Toward an ERL Extension to CESR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOOBAB02, pp. 107-109.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Ohnishi et al., “Dynamic Aperture Optimization in SuperKEKB”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper FRT1B2, pp. 73-78.
- A. Kilicgedik et al., “RF Measurements and Tuning of the Test Module of 800 MHz Radio-Frequency Quadrupole”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 438-440.
- J. W. McKenzie and B. L. Militsyn, “A Velocity Bunching Scheme for Creating Sub-picosecond Electron Bunches from an RF Photocathode Gun”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC132, pp. 3194-3196.
- A. V. Bogomyagkov, E. B. Levichev, and P. A. Piminov, “Interaction Region Design of Super-CT-Factory in Novosibirsk”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP071, pp. 2264-2266.
- R. Corsini, F. Tecker, P. Urschütz, H.-H. Braun, S. Doebert, and E. Jensen, “Efficient Long-Pulse, Fully Loaded CTF3 Linac Operation”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP002, pp. 31-33.
- P. Craievich, M. Petronio, and R. Vescovo, “Deflecting Mode Optimization for a High Energy Beam Diagnostic Tool”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP063, pp. 4096-4098.
- K. R. Lauer, D. B. Allan, and T. A. Caswell, “caproto: An EPICS Channel Access Interface in Pure Python”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WESH4001, pp. XX-XX.
- P. W. Allison, C. R. Emigh, and R. R. Stevens, “The Injector Complex for the LAMPF Accelerator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 135-140.
- K. Torgasin et al., “Coaxial Quarter Wavelength Impedance Converter for Coupling Control of Triode Cavity”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 689-691.
- J. M. Haughian and R. M. Main, “An Inexpensive Method of Cooling an RF Cavity”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 395-397.
- V. G. Dudnikov and C. M. Ankenbrandt, “Beam Brightness Booster with Charge Exchange Injection and Superintense Circulating Beams Production”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP016, pp. 844-846.
- A. P. Kaan, J. F. J. van den Brand, M. Doets, E. van Leeuwen, and O. Postma, “Internal Gas Targets in AmPS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P019, pp. 3630-3632.
- N. Solyak et al., “HOM Coupler Performance in CW Regime in Horizontal and Vertical Tests”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB089, pp. 1349-1353.
- A. H. Lumpkin, W. J. Berg, M. Borland, J. W. Lewellen, and N. S. Sereno, “Initial CTR-Based Bunch Length Measurements of Linac Beams Following the APS Bunch Compressor”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB005, pp. 2420-2422.
- Y. Kim et al., “New Generation Digital Longitudinal Feedback System for Duke FEL and HIGS Facilities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS037, pp. 518-520.
- S. Fujishima, H. Okuno, T. Tominaka, A. Goto, and Y. Yano, “Design of the Injection and Extraction Systems for the RIKEN SRC”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P1-13, pp. XX-XX.
- K. Tian, J. J. Sebek, and J. L. Vargas, “Investigation of Transverse Beam Instability Induced by an In-vacuum Undulator at SPEAR3”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 31-34.
- C. A. Swoboda, R. E. Daniels, H. C. Lau, and A. Tummillo, “PRIMET: A Versatile Accelerator Timing System”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 653-656.
- J.-B. Lagrange et al., “nuSTORM FFAG Decay Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3369-3371.
- S. Hirlaender et al., “LEIR Injection Efficiency Studies as a Function of the Beam Energy Distribution from Linac3”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 758-760.
- G. Hoffstaetter et al., “Progress Toward an ERL Extension to CESR”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOOBAB02, pp. 107-109.
Back to search