Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] I. P. S. Martin, R. Bartolini, R. T. Fielder, E. C. Longhi, and B. Singh, “Further Advances in Understanding and Optimising Beam Dynamics in the Diamond Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC025, pp. 3032-3034.
[n] T. Mitsuhashi and M. Tadano, “Measurement of Bunch Length using Intensity Interferometry”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI110, pp. 1936-1938.
[n] Y. You, W.-H. Huang, C.-X. Tang, L. X. Yan, H. Shimizu, and J. Urakawa, “Gaussian Spectrum Fiber Laser Pulses Generated in an All-normal-dispersion Cavity”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME024, pp. 2983-2985.
[n] S. Dat?® et al., “Operation Status of the SPring-8 Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A05, pp. 672-674.
[n] B. E. Fischer and R. Spohr, “Invited Paper: Production of Microstructures by Heavy Ions”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper J-02, pp. 555-565.
[n] F. W. Wang and Z. Li, “High Power Tests of the 2-Pin Waveguide Structures”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI083, pp. 2890-2892.
[n] P. Miller, “STATUS OF THE COUPLED CYCLOTRON FACILITY AT NSCL”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18B2, pp. XX-XX.
[n] M. Shirakata et al., “Slow Extraction Control Using the Digital Feedback System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A03, pp. 1921-1923.
[n] C. Montag, “Simulation of Resonance Streaming at the eRHIC Electron Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE031, pp. 2215-2217.
[n] D. Proch, “The TESLA Cavity: Design Considerations and RF Properties”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93G01, pp. XX-XX.
[n] L. Phillips, “An Update on Windows, Couplers, Higher-Order-Mode Damping, and Interlocks”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93D02, pp. XX-XX.
[n] K. W. Shepard, M. Kedzie, J. R. Delayen, C. Piller, and A. M. Porcellato, “Development of Niobium Spoke Cavities for a Superconducting Light-Ion Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4082, pp. 956-958.
[n] X. Zhai et al., “Fourteen MeV Electron Radiation Processing Accelerator and Its Applications”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-30, pp. 601-602.
[n] W. W. MacKay et al., “Commissioning Spin Rotators in RHIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB038, pp. 1697-1699.
[n] E. Baron, L. Ah-Hot, M. P. Bourgarel, C. Bieth, A. Cabrespine, and G. Goldstein, “Status Report on the Alice Project”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69G06, pp. XX-XX.
[n] L. G. Yan, D. R. Deng, and J. Wang, “The Mini-Period Permanent Magnet Staggered Undulator for Compact X-Ray Free Electron Laser”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1797-1800. doi:10.18429/JACoW-IPAC2019-TUPRB052
[n] A. Buteau, P. Betinelli, and B. Gagey, “Status of the SOLEIL Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP085, pp. XX-XX.
[n] M. W. Wang et al., “A Rotation Method to Calibrate BPM Electric Offsets”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2595-2597. doi:10.18429/JACoW-IPAC2019-WEPGW052
[n] D. Rice, S. Greenwald, Z. Greenwald, and S. Peck, “Measurements of Synchro-Betatron Coupling by an RF Cavity in CESR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 464-467.
[n] D. Wang, I. Ben-Zvi, X. Chang, J. Kewisch, C. Montag, and F. Zhou, “Simulation of Magnetized Beams”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG003, pp. 3186-3188.
[n] K. Bhandari, “STATUS OF THE KOLKATA K500 SUPERCONDUCTING CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18A4, pp. XX-XX.
[n] B. Jacquot, “GANIL STATUS REPORT”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18B1, pp. XX-XX.
[n] A. Ueno, C. Kubota, Y. Mori, A. Takagi, and Y. Yamazaki, “RF Field Measurement of an RFQ Cold Model Cavity for the JHP”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO408, pp. 60-62.
[n] J. Pivarccaron, “Vacuum for Cyclotron Beam Transport Lines”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-40, pp. 318-321.
[n] N. Rahimpour Kalkhoran, H. Afarideh, R. Solhju, and M. Ghergherehchi, “Design and Simulation of 18 MeV Cyclotron Magnet by TOSCA Code”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 77-80. doi:10.18429/JACoW-ICAP2015-WEP09
[n] S. Artikova, Y. Kondo, T. Mibe, and M. Otani, “Deflector Design for Spin Rotator in Muon Linear Accelerator”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 830-832. doi:10.18429/JACoW-LINAC2016-THPRC028
[n] J. F. Benesch, “Preliminary Statistical Analysis of CEBAF's Cavity Pair Assembly Process Data”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I04, pp. XX-XX.
[n] G. Yocky, F.-J. Decker, N. Lipkowitz, U. Wienands, and M. Woodley, “Anomalously Long Bunches from the SLAC North Damping Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO065, pp. 2015-2017.
[n] H. Akikawa et al., “Beam Profile Measurements by Using Wire Detectors in J-PARC”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POW004, pp. XX-XX.
[n] E. Willen et al., “Superconducting Helical Snake Magnet for the AGS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT046, pp. 2935-2937.
For LaTeX
Use Complete Form
For BibTeX
References
- I. P. S. Martin, R. Bartolini, R. T. Fielder, E. C. Longhi, and B. Singh, “Further Advances in Understanding and Optimising Beam Dynamics in the Diamond Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC025, pp. 3032-3034.
- T. Mitsuhashi and M. Tadano, “Measurement of Bunch Length using Intensity Interferometry”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI110, pp. 1936-1938.
- Y. You, W.-H. Huang, C.-X. Tang, L. X. Yan, H. Shimizu, and J. Urakawa, “Gaussian Spectrum Fiber Laser Pulses Generated in an All-normal-dispersion Cavity”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME024, pp. 2983-2985.
- S. Dat?® et al., “Operation Status of the SPring-8 Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A05, pp. 672-674.
- B. E. Fischer and R. Spohr, “Invited Paper: Production of Microstructures by Heavy Ions”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper J-02, pp. 555-565.
- F. W. Wang and Z. Li, “High Power Tests of the 2-Pin Waveguide Structures”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI083, pp. 2890-2892.
- P. Miller, “STATUS OF THE COUPLED CYCLOTRON FACILITY AT NSCL”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18B2, pp. XX-XX.
- M. Shirakata et al., “Slow Extraction Control Using the Digital Feedback System”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A03, pp. 1921-1923.
- C. Montag, “Simulation of Resonance Streaming at the eRHIC Electron Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE031, pp. 2215-2217.
- D. Proch, “The TESLA Cavity: Design Considerations and RF Properties”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93G01, pp. XX-XX.
- L. Phillips, “An Update on Windows, Couplers, Higher-Order-Mode Damping, and Interlocks”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93D02, pp. XX-XX.
- K. W. Shepard, M. Kedzie, J. R. Delayen, C. Piller, and A. M. Porcellato, “Development of Niobium Spoke Cavities for a Superconducting Light-Ion Linac”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4082, pp. 956-958.
- X. Zhai et al., “Fourteen MeV Electron Radiation Processing Accelerator and Its Applications”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-30, pp. 601-602.
- W. W. MacKay et al., “Commissioning Spin Rotators in RHIC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB038, pp. 1697-1699.
- E. Baron, L. Ah-Hot, M. P. Bourgarel, C. Bieth, A. Cabrespine, and G. Goldstein, “Status Report on the Alice Project”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69G06, pp. XX-XX.
- L. G. Yan, D. R. Deng, and J. Wang, “The Mini-Period Permanent Magnet Staggered Undulator for Compact X-Ray Free Electron Laser”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1797-1800.
- A. Buteau, P. Betinelli, and B. Gagey, “Status of the SOLEIL Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP085, pp. XX-XX.
- M. W. Wang et al., “A Rotation Method to Calibrate BPM Electric Offsets”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2595-2597.
- D. Rice, S. Greenwald, Z. Greenwald, and S. Peck, “Measurements of Synchro-Betatron Coupling by an RF Cavity in CESR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 464-467.
- D. Wang, I. Ben-Zvi, X. Chang, J. Kewisch, C. Montag, and F. Zhou, “Simulation of Magnetized Beams”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG003, pp. 3186-3188.
- K. Bhandari, “STATUS OF THE KOLKATA K500 SUPERCONDUCTING CYCLOTRON”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18A4, pp. XX-XX.
- B. Jacquot, “GANIL STATUS REPORT”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18B1, pp. XX-XX.
- A. Ueno, C. Kubota, Y. Mori, A. Takagi, and Y. Yamazaki, “RF Field Measurement of an RFQ Cold Model Cavity for the JHP”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO408, pp. 60-62.
- J. Pivarccaron, “Vacuum for Cyclotron Beam Transport Lines”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-40, pp. 318-321.
- N. Rahimpour Kalkhoran, H. Afarideh, R. Solhju, and M. Ghergherehchi, “Design and Simulation of 18 MeV Cyclotron Magnet by TOSCA Code”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 77-80.
- S. Artikova, Y. Kondo, T. Mibe, and M. Otani, “Deflector Design for Spin Rotator in Muon Linear Accelerator”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 830-832.
- J. F. Benesch, “Preliminary Statistical Analysis of CEBAF's Cavity Pair Assembly Process Data”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I04, pp. XX-XX.
- G. Yocky, F.-J. Decker, N. Lipkowitz, U. Wienands, and M. Woodley, “Anomalously Long Bunches from the SLAC North Damping Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO065, pp. 2015-2017.
- H. Akikawa et al., “Beam Profile Measurements by Using Wire Detectors in J-PARC”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POW004, pp. XX-XX.
- E. Willen et al., “Superconducting Helical Snake Magnet for the AGS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT046, pp. 2935-2937.
Back to search