Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Piosczyk, “Preaccelerator Design and Component Development for the SNQ Linear Accelerator”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B04, pp. 43-45.
[n] J. Zemella, C. P. Maag, J. Rossbach, H. Sinn, and M. Tolkiehn, “Numerical Simulations of an XFELO for the European XFEL driven by a Spent Beam”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD29, pp. 429-432.
[n] N. N. Alexeev et al., “Accelerator Technologies Development at ITEP”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUZ02, pp. 34-38.
[n] G. Stancari et al., “Electron Lens for the Fermilab Integrable Optics Test Accelerator”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 170-172. doi:10.18429/JACoW-HB2016-MOPR035
[n] A. Laxdal et al., “High Power Allison Scanner for Electrons”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper TUCP04, pp. 133-135.
[n] V. I. Bobylev, “Operation of the Linac-Injector Modulator into a Mismatched Load”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P03, pp. 314-317.
[n] J. J. Sebek et al., “Frequent Fill Top-Off Injection at SPEAR3”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP217, pp. 2531-2533.
[n] S. Amiri, H. Ghasem, A. Gholampour, H. Khosroabadi, J. Rahighi, and M. Lamehi Rashti, “Photoemission Electron Microscopy Branch of Spectromicroscopy Beamline of the Iranian Light Source Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2078-2080. doi:10.18429/JACoW-IPAC2014-WEPRO058
[n] J. J. Knopp, “Notch Geometry Optimization of APS Upgrade High Heat Load Mirror Systems”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper WEPC06, pp. XX-XX.
[n] Y. Sumitomo et al., “Simulation for THz Coherent Undulator Radiation from Combination of Velocity Bunchings”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4345-4347. doi:10.18429/JACoW-IPAC2018-THPMK022
[n] J. F. Amundson, P. Spentzouris, and E. G. Stern, “Space Charge Simulations for the Mu2e Experiment at Fermilab”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP017, pp. 3226-3226.
[n] E. V. Bulyak and S. V. Efimov, “Nonlinear Effects Occuring Due to Fringe Fields of Cyclic Accelerators Dipoles”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1455-1458.
[n] D. H. Zhang et al., “A Wire Position Monitor System for Superconducting Cryomodules at Fermilab”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM031, pp. 187-188.
[n] M.-E. Couprie et al., “The ARC-EN-CIEL Fourth Generation Light Source Proposal”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH066, pp. 131-134.
[n] E. A. Nanni et al., “Design of a Field-Emission X-Band Gun Driven by Solid-State RF Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4399-4402. doi:10.18429/JACoW-IPAC2017-THPIK126
[n] J. Y. Zhai et al., “IHEP 1.3 GHz Low Loss Large Grain 9-cell Cavity Fabrication, Processing and Test”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP073, pp. 305-307.
[n] N. K. Bultman, M. Collier, and D. Richards, “Mechanical Design of the SNS Coupled Cavity Accelerator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH045, pp. 2189-2191.
[n] P. Schoessow et al., “The Argonne Wakefield Accelerator High Current Photocathode Gun and Drive Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB11, pp. 976-978.
[n] A. Moutardier et al., “Characterization of the Electron Beam Visualization Stations of the ThomX Accelerator”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 240-243. doi:10.18429/JACoW-IPAC2022-MOPOPT006
[n] W. J. Schneider et al., “A Load-Locked Gun for the Jefferson Lab Polarized Injector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA45, pp. 1991-1993.
[n] A. V. Zlobin, J. R. Carmichael, V. V. Kashikhin, and I. Novitski, “Conceptual Design of a 17 T Nb3Sn Accelerator Dipole Magnet”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2742-2744. doi:10.18429/JACoW-IPAC2018-WEPML027
[n] R. Neswold and B. F. Harrison, “The Web as the Primary Control System User Interface”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 986. doi:10.18429/JACoW-ICALEPCS2019-WEDPR04
[n] U. Lehnert, V. B. Asgegar, P. Michel, G. Staats, J. Teichert, and R. Wuensch, “Gain Deterioration at Particular Wavelengths in a Partially Waveguided FEL”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH016, pp. 36-38.
[n] U. Wienands, B. Allen, W. S. Colocho, R. A. Erickson, and M. Stanek, “Reliability in the LCLS Era at SLAC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP034, pp. 4844-4846.
[n] S. Isagawa et al., “Coating Techniques and Improvement of High Power CW Klystrons for TRISTAN”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1912-1915.
[n] H. Stockhorst, M. Kuehn, H. Meuth, and J. Wei, “Longitudinal Phase Space Tracking of Particles in a Multiple Harmonic RF-System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 962-965.
[n] N. D. Arnold, G. J. Nawrocki, S. J. Benes, M. G. Hoffberg, and J. R. Winans, “An I/O Subnet for the APS Control System: The BITBUS Universal Gateway”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1957-1960.
[n] M. Xie, “A Fundamental Theorem on Particle Acceleration”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG017, pp. 1843-1845.
[n] T. T. Valicenti, J. A. Carter, P. K. Den Hartog, and K. J. Suthar, “Bend Magnet Head Loads and Out of Orbit Scenarios”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 931-933. doi:10.18429/JACoW-NAPAC2016-WEPOB18
[n] C. W. Potts, “An Instrument for Measuring Betatron Resonant Frequencies”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 382-387.
[n] A. H. Lumpkin et al., “Spatial Resolution Limits of YAG:Ce Powder Beam-Profile Monitors at the Fermilab A0 Photoinjector”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC46, pp. 348-351.
[n] J. Fusellier and J. M. Joly, “Beam Intensity Monitoring and Machine Protection by Toroidal Transformers on the TESLA Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP012L, pp. 1591-1593.
[n] J. M. Peterson, K. L. Brown, and J. B. Truher, “Design Features and Operational Characteristics of the PEP Beam-Transport and Injection System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3059-3062.
[n] W. Chen, B. Zhang, F. Li, and R. Yang, “Improved design of the emittancemeter for the c-band photoinjector at IHEP”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 554-558. doi:10.18429/JACoW-IBIC2025-TUPMO35
[n] Q. Z. Xing et al., “Design of the 7MeV Linac Injector for the 200MeV Synchrotron of the Xi'an Proton Application Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 426-428. doi:10.18429/JACoW-IPAC2016-MOPMW014
[n] N. D. Arnold, R. T. Daly, M. R. Kraimer, W. P. McDowell, and G. J. Nawrocki, “I/O Subnets for the APS Control System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1496-1499.
[n] J. Norem, M. Knott, and A. Rauchas, “Beam Stabillity in a 6 GeV Synchrotron Light Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1883-1886.
[n] M. Begg, D. Einfeld, and D. Tommassini, “The ELETTRA Transfer Line Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2372-2375.
[n] S. Eylon, E. Henestroza, and F. Deadrick, “K+ Diode for the LLNL Heavy Ion Recirculator Accelerator Experiment”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPA02, pp. 905-907.
[n] E. Syresin et al., “Design and Construction of Tubular Electron String Ion Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC067, pp. 4208-4210.
[n] J. Reich, C. Mayer-B, S. Martin, K. L. Brown, and F. E. Johnson, “The Jülich Double-Monochromator System”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 407-415.
[n] D. A. Jaroszynski et al., “Gamma Ray Sources Based on Plasma Wakefield Accelerators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP104, pp. 3044-3044.
[n] K. Takayama et al., “Induction Acceleration of a Single RF Bunch in the KEK PS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE020, pp. 1679-1681.
[n] F. Hornstra, A. Brescia, M. Knott, and C. Swoboda, “On-Line Computer Monitoring and Optimization of a Multiple Target Proton Beam Line”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 823-827.
[n] G. J. Caporaso, A. G. Cole, and K. W. Struve, “Beam Breakup (BBU) Instability Experiments on the Experimental Test Accelerator (ETA) and Predictions for the Advanced Test Accelerator (ATA)”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2507-2510.
[n] H. Harano, K. Kinoshita, T. Ueda, M. Uesaka, T. Watanabe, and K. Yoshii, “Fundamental Research of Subpicosecond Time Resolved X-Ray Diffractometry Using Electron Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP36C, pp. 2452-2454.
[n] E. Hoyer et al., “The Beam Line VI REC-Steel Hybrid Wiggler for SSRL”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3118-3121.
[n] F. Marti et al., “Beam Dynamics Issues in the NSCL Coupled Cyclotron Upgrade”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-01, pp. 447-453.
[n] A. Latina, P. Eliasson, and D. Schulte, “Implications of a Curved Tunnel for the Main Linac of CLIC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS130, pp. 864-866.
[n] S. Wang et al., “Horizontal Beam-size Measurements at CESR-TA Using Synchrotron-light Interferometer”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR079, pp. 972-974.
[n] S. C. Schaller and E. A. Bjorklund, “Distributed Data Access in the LAMPF Control System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 745-748.
[n] J. Haimson and B. L. Mecklenburg, “A 17 GHz High Gradient Linac having Stainless Steel Surfaces in the High Intensity Magnetic and Electric Field Regions of the Structure”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS085, pp. 2532-2534.
[n] P. C. Chiu, J. Chen, Y. K. Chen, K. T. Hsu, K. H. Hu, and C. H. Kuo, “Injection Efficiency Diagnostic at TLS Storage Ring”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD67, pp. 461-463.
[n] J. Pinel and D. T. Tran, “Development of the Floating Wire Method for the Control of Complex Optical Systems”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 757-762.
[n] S. Peggs, A. Bogacz, and F. Harfoush, “A Comparison of Transition Jump Schemes for the Main Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1660-1663.
[n] J. Etxeberria and J. H. Lee, “EtherCAT based DAQ system at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1536-1538. doi:10.18429/JACoW-ICALEPCS2017-THPHA067
[n] M. A. Araya et al., “A New ACS Bulk Data Transfer Service for CTA”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1116-1120. doi:10.18429/JACoW-ICALEPCS2017-THBPL03
[n] J. W. Poukey, T. W. L. Sanford, J. A. Halbleib, and R. C. Mock, “Compound-Lens Injector for a 19-MeV, 700-kA Electron Beam”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 691-694.
[n] A. Chapman-Hatchett, A. Jansson, and D. J. Williams, “A Magnetic Quadrupole Pick-Up for the CERN PS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA154, pp. 2223-2225.
[n] P. K. Den Hartog, J. Grimmer, E. Trakhtenberg, G. Wiemerslage, and S. Xu, “Advanced Photon Source Experience with Vacuum Chambers for Insertion Devices”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8C005, pp. 3556-3558.
[n] M. A. Leitner et al., “Design Choices for the Integrated Beam Experiment (IBX)”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG040, pp. 1521-1523.
[n] J. Ungrin, S. O. Schriber, and R. A. Vokes, “Post Coupler Studies for Alvarez Tanks to be Used for High Power or Variable Energy”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper E12, pp. 183-186.
[n] J. G. Hwang, S. Y. Noh, P. Forck, C. Kim, and T. K. Yang, “Development of Capacitive Linear-Cut Beam Position Monitor for Heavy-Ion Synchrotron of KHIMA Project”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 405-409. doi:10.18429/JACoW-IBIC2015-TUPB041
[n] L. D. Hansborough, J. M. Potter, and N. G. Wilson, “Mechanical Design of RFQ Resonator Cavities in the 400-MHz Frequency Range”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper I03, pp. 329-331.
[n] H. Schoenauer, “Neutralization of Bunched Proton Beams”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 866-869.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Piosczyk, “Preaccelerator Design and Component Development for the SNQ Linear Accelerator”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B04, pp. 43-45.
- J. Zemella, C. P. Maag, J. Rossbach, H. Sinn, and M. Tolkiehn, “Numerical Simulations of an XFELO for the European XFEL driven by a Spent Beam”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper WEPD29, pp. 429-432.
- N. N. Alexeev et al., “Accelerator Technologies Development at ITEP”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper TUZ02, pp. 34-38.
- G. Stancari et al., “Electron Lens for the Fermilab Integrable Optics Test Accelerator”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 170-172.
- A. Laxdal et al., “High Power Allison Scanner for Electrons”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper TUCP04, pp. 133-135.
- V. I. Bobylev, “Operation of the Linac-Injector Modulator into a Mismatched Load”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P03, pp. 314-317.
- J. J. Sebek et al., “Frequent Fill Top-Off Injection at SPEAR3”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP217, pp. 2531-2533.
- S. Amiri, H. Ghasem, A. Gholampour, H. Khosroabadi, J. Rahighi, and M. Lamehi Rashti, “Photoemission Electron Microscopy Branch of Spectromicroscopy Beamline of the Iranian Light Source Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2078-2080.
- J. J. Knopp, “Notch Geometry Optimization of APS Upgrade High Heat Load Mirror Systems”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper WEPC06, pp. XX-XX.
- Y. Sumitomo et al., “Simulation for THz Coherent Undulator Radiation from Combination of Velocity Bunchings”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4345-4347.
- J. F. Amundson, P. Spentzouris, and E. G. Stern, “Space Charge Simulations for the Mu2e Experiment at Fermilab”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP017, pp. 3226-3226.
- E. V. Bulyak and S. V. Efimov, “Nonlinear Effects Occuring Due to Fringe Fields of Cyclic Accelerators Dipoles”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1455-1458.
- D. H. Zhang et al., “A Wire Position Monitor System for Superconducting Cryomodules at Fermilab”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM031, pp. 187-188.
- M.-E. Couprie et al., “The ARC-EN-CIEL Fourth Generation Light Source Proposal”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH066, pp. 131-134.
- E. A. Nanni et al., “Design of a Field-Emission X-Band Gun Driven by Solid-State RF Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4399-4402.
- J. Y. Zhai et al., “IHEP 1.3 GHz Low Loss Large Grain 9-cell Cavity Fabrication, Processing and Test”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP073, pp. 305-307.
- N. K. Bultman, M. Collier, and D. Richards, “Mechanical Design of the SNS Coupled Cavity Accelerator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH045, pp. 2189-2191.
- P. Schoessow et al., “The Argonne Wakefield Accelerator High Current Photocathode Gun and Drive Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPB11, pp. 976-978.
- A. Moutardier et al., “Characterization of the Electron Beam Visualization Stations of the ThomX Accelerator”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 240-243.
- W. J. Schneider et al., “A Load-Locked Gun for the Jefferson Lab Polarized Injector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA45, pp. 1991-1993.
- A. V. Zlobin, J. R. Carmichael, V. V. Kashikhin, and I. Novitski, “Conceptual Design of a 17 T Nb3Sn Accelerator Dipole Magnet”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2742-2744.
- R. Neswold and B. F. Harrison, “The Web as the Primary Control System User Interface”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 986.
- U. Lehnert, V. B. Asgegar, P. Michel, G. Staats, J. Teichert, and R. Wuensch, “Gain Deterioration at Particular Wavelengths in a Partially Waveguided FEL”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH016, pp. 36-38.
- U. Wienands, B. Allen, W. S. Colocho, R. A. Erickson, and M. Stanek, “Reliability in the LCLS Era at SLAC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP034, pp. 4844-4846.
- S. Isagawa et al., “Coating Techniques and Improvement of High Power CW Klystrons for TRISTAN”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1912-1915.
- H. Stockhorst, M. Kuehn, H. Meuth, and J. Wei, “Longitudinal Phase Space Tracking of Particles in a Multiple Harmonic RF-System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 962-965.
- N. D. Arnold, G. J. Nawrocki, S. J. Benes, M. G. Hoffberg, and J. R. Winans, “An I/O Subnet for the APS Control System: The BITBUS Universal Gateway”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1957-1960.
- M. Xie, “A Fundamental Theorem on Particle Acceleration”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG017, pp. 1843-1845.
- T. T. Valicenti, J. A. Carter, P. K. Den Hartog, and K. J. Suthar, “Bend Magnet Head Loads and Out of Orbit Scenarios”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 931-933.
- C. W. Potts, “An Instrument for Measuring Betatron Resonant Frequencies”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 382-387.
- A. H. Lumpkin et al., “Spatial Resolution Limits of YAG:Ce Powder Beam-Profile Monitors at the Fermilab A0 Photoinjector”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC46, pp. 348-351.
- J. Fusellier and J. M. Joly, “Beam Intensity Monitoring and Machine Protection by Toroidal Transformers on the TESLA Test Facility”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP012L, pp. 1591-1593.
- J. M. Peterson, K. L. Brown, and J. B. Truher, “Design Features and Operational Characteristics of the PEP Beam-Transport and Injection System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3059-3062.
- W. Chen, B. Zhang, F. Li, and R. Yang, “Improved design of the emittancemeter for the c-band photoinjector at IHEP”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 554-558.
- Q. Z. Xing et al., “Design of the 7MeV Linac Injector for the 200MeV Synchrotron of the Xi'an Proton Application Facility”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 426-428.
- N. D. Arnold, R. T. Daly, M. R. Kraimer, W. P. McDowell, and G. J. Nawrocki, “I/O Subnets for the APS Control System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1496-1499.
- J. Norem, M. Knott, and A. Rauchas, “Beam Stabillity in a 6 GeV Synchrotron Light Source”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1883-1886.
- M. Begg, D. Einfeld, and D. Tommassini, “The ELETTRA Transfer Line Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2372-2375.
- S. Eylon, E. Henestroza, and F. Deadrick, “K+ Diode for the LLNL Heavy Ion Recirculator Accelerator Experiment”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPA02, pp. 905-907.
- E. Syresin et al., “Design and Construction of Tubular Electron String Ion Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC067, pp. 4208-4210.
- J. Reich, C. Mayer-B, S. Martin, K. L. Brown, and F. E. Johnson, “The Jülich Double-Monochromator System”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 407-415.
- D. A. Jaroszynski et al., “Gamma Ray Sources Based on Plasma Wakefield Accelerators”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP104, pp. 3044-3044.
- K. Takayama et al., “Induction Acceleration of a Single RF Bunch in the KEK PS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE020, pp. 1679-1681.
- F. Hornstra, A. Brescia, M. Knott, and C. Swoboda, “On-Line Computer Monitoring and Optimization of a Multiple Target Proton Beam Line”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 823-827.
- G. J. Caporaso, A. G. Cole, and K. W. Struve, “Beam Breakup (BBU) Instability Experiments on the Experimental Test Accelerator (ETA) and Predictions for the Advanced Test Accelerator (ATA)”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2507-2510.
- H. Harano, K. Kinoshita, T. Ueda, M. Uesaka, T. Watanabe, and K. Yoshii, “Fundamental Research of Subpicosecond Time Resolved X-Ray Diffractometry Using Electron Linac”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP36C, pp. 2452-2454.
- E. Hoyer et al., “The Beam Line VI REC-Steel Hybrid Wiggler for SSRL”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3118-3121.
- F. Marti et al., “Beam Dynamics Issues in the NSCL Coupled Cyclotron Upgrade”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-01, pp. 447-453.
- A. Latina, P. Eliasson, and D. Schulte, “Implications of a Curved Tunnel for the Main Linac of CLIC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS130, pp. 864-866.
- S. Wang et al., “Horizontal Beam-size Measurements at CESR-TA Using Synchrotron-light Interferometer”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR079, pp. 972-974.
- S. C. Schaller and E. A. Bjorklund, “Distributed Data Access in the LAMPF Control System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 745-748.
- J. Haimson and B. L. Mecklenburg, “A 17 GHz High Gradient Linac having Stainless Steel Surfaces in the High Intensity Magnetic and Electric Field Regions of the Structure”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS085, pp. 2532-2534.
- P. C. Chiu, J. Chen, Y. K. Chen, K. T. Hsu, K. H. Hu, and C. H. Kuo, “Injection Efficiency Diagnostic at TLS Storage Ring”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD67, pp. 461-463.
- J. Pinel and D. T. Tran, “Development of the Floating Wire Method for the Control of Complex Optical Systems”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 757-762.
- S. Peggs, A. Bogacz, and F. Harfoush, “A Comparison of Transition Jump Schemes for the Main Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1660-1663.
- J. Etxeberria and J. H. Lee, “EtherCAT based DAQ system at ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1536-1538.
- M. A. Araya et al., “A New ACS Bulk Data Transfer Service for CTA”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1116-1120.
- J. W. Poukey, T. W. L. Sanford, J. A. Halbleib, and R. C. Mock, “Compound-Lens Injector for a 19-MeV, 700-kA Electron Beam”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 691-694.
- A. Chapman-Hatchett, A. Jansson, and D. J. Williams, “A Magnetic Quadrupole Pick-Up for the CERN PS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA154, pp. 2223-2225.
- P. K. Den Hartog, J. Grimmer, E. Trakhtenberg, G. Wiemerslage, and S. Xu, “Advanced Photon Source Experience with Vacuum Chambers for Insertion Devices”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8C005, pp. 3556-3558.
- M. A. Leitner et al., “Design Choices for the Integrated Beam Experiment (IBX)”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG040, pp. 1521-1523.
- J. Ungrin, S. O. Schriber, and R. A. Vokes, “Post Coupler Studies for Alvarez Tanks to be Used for High Power or Variable Energy”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper E12, pp. 183-186.
- J. G. Hwang, S. Y. Noh, P. Forck, C. Kim, and T. K. Yang, “Development of Capacitive Linear-Cut Beam Position Monitor for Heavy-Ion Synchrotron of KHIMA Project”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 405-409.
- L. D. Hansborough, J. M. Potter, and N. G. Wilson, “Mechanical Design of RFQ Resonator Cavities in the 400-MHz Frequency Range”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper I03, pp. 329-331.
- H. Schoenauer, “Neutralization of Bunched Proton Beams”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 866-869.
Back to search