Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. Kaabi, A. Brinkmann, G. Keppel, I. Montero, V. Palmieri, and A. Variola, “Titanium Nitride Coating as a Multipactor Suppressor”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC002, pp. 2887-2889.
[n] H. Badakov et al., “Design, Fabrication and Characterization of a Micron-scale Electron Source Based on Field Enhanced Pyroelectric Crystals”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP141, pp. 352-354.
[n] S. X. Peng et al., “First Intense H- Beam Generated by a Microwave-driven Pure Volume Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI034, pp. 360-362.
[n] S. S. Gilardoni and J. Barranco, “Studies of Losses During Continuous Transfer Extraction at the CERN proton Synchrotron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC047, pp. 3083-3085.
[n] R. Ischebeck et al., “Measurement of transverse profile in electron linacs: recent advances in SwissFEL”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 377-380. doi:10.18429/JACoW-IBIC2025-TUPCO12
[n] J. Sikora, S. De Santis, and K. Hammond, “TE Wave Measurements at CesrTA”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper PST04, pp. 95-99.
[n] N. Yu. Kazarinov, D. Boutin, and F. R. Osswald, “Induced Heating Power Evaluation in RIB Transfer Line of SPIRAL2”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 570-572. doi:10.18429/JACoW-IPAC2014-MOPRI001
[n] C. R. Kim, Y.-S. Cho, H. S. Kim, and H.-J. Kwon, “Design of the Beam Dump for Low Flux Beamline in KOMAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3702-3704. doi:10.18429/JACoW-IPAC2016-THPMY022
[n] Y. Funakoshi, “Luminosity Tuning at KEKB”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 147-150. doi:10.18429/JACoW-eeFACT2016-TUT3BH3
[n] T. Hu et al., “Design and Simulation of Microstrip Directional Coupler with Tight Structure and High Directivity”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP056, pp. 1677-1679.
[n] T. Kramer, M. Benedikt, B. Goddard, and H. Vincke, “Design Considerations for the PS2 Beam Dumps”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP088, pp. 3569-3571.
[n] P. J. Phillips et al., “Single-shot Longitudinal Bunch Profile Measurements at FLASH Using Electro-optic Detection Techniques”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC081, pp. 1242-1244.
[n] M. Fan et al., “Promoting Local Economic Development by an Integration of Industry, Teaching and Research of Compact Low Energy Accelerators”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEIB205, pp. 2119-2122.
[n] B. Joly, U. Weinrich, and G. A. Naylor The European Synchrotron Radiation Facility, “Beam Loss Monitors at the ESRF”, in Proc. DIPAC'99, Chester, UK, May 1999, paper IT03, pp. XX-XX.
[n] G. A. Naylor and B. Joly, “Measurement of Electron Beam Charge in the ESRF Accelerator Complex for Absolute and Injection Efficency Measurements Using an FPGA Based Digital BPM Electronics”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB18, pp. 102-104.
[n] N. Vartanian, E. R. Arab, and G. Travish, “Testing of Laser-Driven Resonant Accelerating-Structures Possessing Sub-Wavelength Periodic Features”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP014, pp. 4559-4561.
For LaTeX
Use Complete Form
For BibTeX
References
- W. Kaabi, A. Brinkmann, G. Keppel, I. Montero, V. Palmieri, and A. Variola, “Titanium Nitride Coating as a Multipactor Suppressor”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC002, pp. 2887-2889.
- H. Badakov et al., “Design, Fabrication and Characterization of a Micron-scale Electron Source Based on Field Enhanced Pyroelectric Crystals”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP141, pp. 352-354.
- S. X. Peng et al., “First Intense H- Beam Generated by a Microwave-driven Pure Volume Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI034, pp. 360-362.
- S. S. Gilardoni and J. Barranco, “Studies of Losses During Continuous Transfer Extraction at the CERN proton Synchrotron”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC047, pp. 3083-3085.
- R. Ischebeck et al., “Measurement of transverse profile in electron linacs: recent advances in SwissFEL”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 377-380.
- J. Sikora, S. De Santis, and K. Hammond, “TE Wave Measurements at CesrTA”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper PST04, pp. 95-99.
- N. Yu. Kazarinov, D. Boutin, and F. R. Osswald, “Induced Heating Power Evaluation in RIB Transfer Line of SPIRAL2”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 570-572.
- C. R. Kim, Y.-S. Cho, H. S. Kim, and H.-J. Kwon, “Design of the Beam Dump for Low Flux Beamline in KOMAC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3702-3704.
- Y. Funakoshi, “Luminosity Tuning at KEKB”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 147-150.
- T. Hu et al., “Design and Simulation of Microstrip Directional Coupler with Tight Structure and High Directivity”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP056, pp. 1677-1679.
- T. Kramer, M. Benedikt, B. Goddard, and H. Vincke, “Design Considerations for the PS2 Beam Dumps”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP088, pp. 3569-3571.
- P. J. Phillips et al., “Single-shot Longitudinal Bunch Profile Measurements at FLASH Using Electro-optic Detection Techniques”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC081, pp. 1242-1244.
- M. Fan et al., “Promoting Local Economic Development by an Integration of Industry, Teaching and Research of Compact Low Energy Accelerators”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEIB205, pp. 2119-2122.
- B. Joly, U. Weinrich, and G. A. Naylor The European Synchrotron Radiation Facility, “Beam Loss Monitors at the ESRF”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper IT03, pp. XX-XX.
- G. A. Naylor and B. Joly, “Measurement of Electron Beam Charge in the ESRF Accelerator Complex for Absolute and Injection Efficency Measurements Using an FPGA Based Digital BPM Electronics”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB18, pp. 102-104.
- N. Vartanian, E. R. Arab, and G. Travish, “Testing of Laser-Driven Resonant Accelerating-Structures Possessing Sub-Wavelength Periodic Features”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP014, pp. 4559-4561.
Back to search