Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Berkaev et al., “VEPP-2000 ELECTRON-POSITRON COLLIDER COMMISSIONING”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH03, pp. XX-XX.
[n] J. Allinger, G. Danby, J. Jackson, and A. Prodell, “High Precision Superconducting Magnets”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1299-1303.
[n] Y.-C. Chae et al., “New Sector 37 Chamber Design and Installation for High-Current Operation of the APS Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR083, pp. 3123-3125.
[n] J. L. Li et al., “Conceptual Design of HEPS Injector”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1394-1397. doi:10.18429/JACoW-IPAC2018-TUPMF058
[n] O. Rey Orozko, A. Apollonio, M. Jonker, and J. A. Uythoven, “Availability Allocation to Particle Accelerators Subsystems by Complexity Criteria”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2009-2012. doi:10.18429/JACoW-IPAC2018-WEPAF075
[n] K. Halbach, “Magnet Innovations for Linacs”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH2-1, pp. 407-410.
[n] C.-Y. Tsai, J. Wu, C. Yang, G. Zhou, and M. Yoon, “Theoretical Formulation of Improved SASE FEL Based on Slippage Enhancement Scheme”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4398-4401. doi:10.18429/JACoW-IPAC2018-THPMK051
[n] F. Havart, D. Chapuis, R. Nunes, and D. Vaxelaire, “Achieving a Highly Configurable Personnel Protection System for Experimental Areas”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC061, pp. 238-241.
[n] R. Ferdinand, P. Bertrand, X. Hulin, M. Jacquemet, and E. Petit, “Progress of Construction and Installation of the SPIRAL2 Accelerator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO002, pp. 3755-3757.
[n] H. A. Schwettman et al., “Low Temperature Aspects of a Cryogenic Accelerator”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 336-345.
[n] C. Yang et al., “Simulation for LCLS-II Hard X-ray Self Seeding Scheme”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4406-4409. doi:10.18429/JACoW-IPAC2018-THPMK053
[n] D. S. Foudeh, E. Huttel, and N. Kh. Sawai, “The RF System of the SESAME Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4187-4189. doi:10.18429/JACoW-IPAC2017-THPIK041
[n] T. Durand, F. Haddad, and F. Poirier, “The C70XP injection line transverse distribution study and impact”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2277-2280. doi:10.18429/JACoW-IPAC2023-TUPM037
[n] P. Anger et al., “Spiral2 Project: Integration of the Accelerator Processes, Construction of the Buildings and Process Connections”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper TUA2C01, pp. 153-155.
[n] T. Taylor, M. de Jong, and W. Michel, “An Emittance Measuring System for High-Current High-Brightness Multi-Beamlet Multi-Species Heavy-Ion Beams”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-23, pp. 100-102.
[n] M. Loiselet et al., “Invited Paper: Production and Acceleration of Radioactive Beams at Louvain-la-Neuve”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper M-01, pp. 629-633.
[n] J. Galayda, “Performance of a Correlator Filter in Betatron Tune Measurements and Damping on the NSLS Booster”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2132-2135.
[n] S. Kwon et al., “FPGA Implementation of a Control System for the LANSCE Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2771-2773. doi:10.18429/JACoW-IPAC2016-WEPOR044
[n] D. Rogind et al., “Integrated Management Tool for Controls Software Problems, Requests and Project Tasking at SLAC”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOMAU008, pp. 59-62.
[n] E. Sanchez-Corral Mena et al., “Data Management and Tools for the Access to the Radiological Areas at CERN”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC057, pp. 226-229.
[n] A. V. Fedotov et al., “Electron Cooling for the Low-Energy RHIC Program”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper MOM2MCIO01, pp. 11-15.
[n] C. Gardner et al., “Analysis of Resonance-Driving Imperfections in the AGS Booster”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 979-982.
[n] S. J. Bean et al., “A New Ultra-Stable Variable Projection Microscope for the APS Upgrade of 32-ID”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 211. doi:10.18429/JACoW-MEDSI2020-TUPC15
[n] S. Baek, M. Kwon, S. Lee, H. K. Na, and M. K. Park, “KSTAR Widget Toolkit Using Qt Library for the EPICS Based Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP029, pp. 146-148.
[n] O. V. Singh and R. J. Nawrocky, “Upgrade of Beam Steering System Components and Controls for the NSLS Storage Rings”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1902-1905.
[n] E. Petit, “Progress of the SPIRAL2 Project”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper MOC02, pp. 40-40.
[n] M. Puglisi, “Status of the Synchrotron Light Source ELETTRA”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 478-481.
[n] P. M. Michelato and L. Monaco, “Evolution of the Defects on the Niobium Surface during BCP and EP Treatments”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO091, pp. 839-843.
[n] A. Crisol et al., “All Applications of the ALBA Skin Concept”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 259. doi:10.18429/JACoW-MEDSI2020-WEPA14
[n] C.-Y. Tsai, J. Wu, C. Yang, G. Zhou, and M. Yoon, “Analysis of 1D FEL Sideband Instability with Inclusion of Energy Detune and Space Charge”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4410-4413. doi:10.18429/JACoW-IPAC2018-THPMK054
[n] A. Götz et al., “Extending the ICAT Metadata Catalogue to New Scientific Use Cases”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1033-1040. doi:10.18429/JACoW-ICALEPCS2023-WE3BCO07
[n] R. Frankel et al., “The AGS Booster Control System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1090-1093.
[n] E. Z. Barzi et al., “An Innovative Nb3Sn Film Approach and Its Potential for SRF Applications”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 513-515. doi:10.18429/JACoW-LINAC2018-TUPO076
[n] A. Burril and M. Poelker, “ERL07 Working Group 1 Summary: Electron Guns and Injector Designs”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 1, pp. 139-144.
[n] R. Alvarez, R. Borghi, and J. Weaver, “Precision Phase Adjustment of a Linear Accelerator High Power Waveguide Feed Network”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 39-44.
[n] G. Brown et al., “Operation of PEP in a Low Emittance Mode”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 461-464.
[n] P. Mortazavi, J. Keane, S. Sharma, and M. Thomas, “Mechanical Design of SXLS Radio-Frequency Cavity”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 263-266.
[n] F. Furuta et al., “Status and Challenges of Vertical Electro-Polishing R&D at Cornell”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1115-1118. doi:10.18429/JACoW-IPAC2017-MOPVA115
[n] R. L. Gluckstern, “Beam Dynamics in Linear Accelerators”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 194-202.
[n] D. Dunning et al., “The UK XFEL conceptual design and options analysis project”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 754-757. doi:10.18429/JACoW-LINAC2024-THPB059
[n] G. Wustefeld, J. Feikes, K. Holldack, and P. Kuske, “Sub-Picosecond Electron Bunches in the BESSY Storage Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT051, pp. 1954-1956.
[n] S. Zelazny et al., “Orbit Display's Use of the Physics Application Framework for LCLS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THC004, pp. 673-675.
[n] A. Y. Zelinsky, I. V. Drebot, Yu. N. Grigor, R. Tatchyn, and O. D. Zvonarjova, “Radiation of Electron in the Field of Plane Light Wave”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT077, pp. 3997-3999.
[n] J. L. Baelde et al., “A New Unit Access Control for GANIL and SPIRAL 2”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper G-01, pp. 357-359.
[n] G. T. Konrad, “High Efficiency, CW, High Power Klystrons for Storage Ring Applications”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1249-1253.
[n] N. Cutic, C. Erny, F. Lindau, S. Thorin, and S. Werin, “An Electro-optical System for MAX-lab Test-FEL Facility”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC79, pp. 685-687.
[n] D. D. M. Ho, R. O. Bangertere, S. Brandon, E. P. Lee, and J. W. K. Mark, “Dynamics of Heavy Ion Beams During Longitudinal Compression”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1994-1997.
[n] M. Popovic et al., “Phase and Frequency Locked Magnetrons for SRF Sources”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP083, pp. 979-981.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Berkaev et al., “VEPP-2000 ELECTRON-POSITRON COLLIDER COMMISSIONING”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper TUACH03, pp. XX-XX.
- J. Allinger, G. Danby, J. Jackson, and A. Prodell, “High Precision Superconducting Magnets”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1299-1303.
- Y.-C. Chae et al., “New Sector 37 Chamber Design and Installation for High-Current Operation of the APS Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR083, pp. 3123-3125.
- J. L. Li et al., “Conceptual Design of HEPS Injector”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1394-1397.
- O. Rey Orozko, A. Apollonio, M. Jonker, and J. A. Uythoven, “Availability Allocation to Particle Accelerators Subsystems by Complexity Criteria”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2009-2012.
- K. Halbach, “Magnet Innovations for Linacs”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH2-1, pp. 407-410.
- C.-Y. Tsai, J. Wu, C. Yang, G. Zhou, and M. Yoon, “Theoretical Formulation of Improved SASE FEL Based on Slippage Enhancement Scheme”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4398-4401.
- F. Havart, D. Chapuis, R. Nunes, and D. Vaxelaire, “Achieving a Highly Configurable Personnel Protection System for Experimental Areas”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC061, pp. 238-241.
- R. Ferdinand, P. Bertrand, X. Hulin, M. Jacquemet, and E. Petit, “Progress of Construction and Installation of the SPIRAL2 Accelerator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO002, pp. 3755-3757.
- H. A. Schwettman et al., “Low Temperature Aspects of a Cryogenic Accelerator”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 336-345.
- C. Yang et al., “Simulation for LCLS-II Hard X-ray Self Seeding Scheme”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4406-4409.
- D. S. Foudeh, E. Huttel, and N. Kh. Sawai, “The RF System of the SESAME Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4187-4189.
- T. Durand, F. Haddad, and F. Poirier, “The C70XP injection line transverse distribution study and impact”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM037, pp. 2277-2280.
- P. Anger et al., “Spiral2 Project: Integration of the Accelerator Processes, Construction of the Buildings and Process Connections”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper TUA2C01, pp. 153-155.
- T. Taylor, M. de Jong, and W. Michel, “An Emittance Measuring System for High-Current High-Brightness Multi-Beamlet Multi-Species Heavy-Ion Beams”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-23, pp. 100-102.
- M. Loiselet et al., “Invited Paper: Production and Acceleration of Radioactive Beams at Louvain-la-Neuve”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper M-01, pp. 629-633.
- J. Galayda, “Performance of a Correlator Filter in Betatron Tune Measurements and Damping on the NSLS Booster”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2132-2135.
- S. Kwon et al., “FPGA Implementation of a Control System for the LANSCE Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2771-2773.
- D. Rogind et al., “Integrated Management Tool for Controls Software Problems, Requests and Project Tasking at SLAC”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOMAU008, pp. 59-62.
- E. Sanchez-Corral Mena et al., “Data Management and Tools for the Access to the Radiological Areas at CERN”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC057, pp. 226-229.
- A. V. Fedotov et al., “Electron Cooling for the Low-Energy RHIC Program”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper MOM2MCIO01, pp. 11-15.
- C. Gardner et al., “Analysis of Resonance-Driving Imperfections in the AGS Booster”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 979-982.
- S. J. Bean et al., “A New Ultra-Stable Variable Projection Microscope for the APS Upgrade of 32-ID”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 211.
- S. Baek, M. Kwon, S. Lee, H. K. Na, and M. K. Park, “KSTAR Widget Toolkit Using Qt Library for the EPICS Based Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP029, pp. 146-148.
- O. V. Singh and R. J. Nawrocky, “Upgrade of Beam Steering System Components and Controls for the NSLS Storage Rings”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1902-1905.
- E. Petit, “Progress of the SPIRAL2 Project”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper MOC02, pp. 40-40.
- M. Puglisi, “Status of the Synchrotron Light Source ELETTRA”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 478-481.
- P. M. Michelato and L. Monaco, “Evolution of the Defects on the Niobium Surface during BCP and EP Treatments”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO091, pp. 839-843.
- A. Crisol et al., “All Applications of the ALBA Skin Concept”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 259.
- C.-Y. Tsai, J. Wu, C. Yang, G. Zhou, and M. Yoon, “Analysis of 1D FEL Sideband Instability with Inclusion of Energy Detune and Space Charge”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4410-4413.
- A. Götz et al., “Extending the ICAT Metadata Catalogue to New Scientific Use Cases”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper WE3BCO07, pp. 1033-1040.
- R. Frankel et al., “The AGS Booster Control System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1090-1093.
- E. Z. Barzi et al., “An Innovative Nb3Sn Film Approach and Its Potential for SRF Applications”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 513-515.
- A. Burril and M. Poelker, “ERL07 Working Group 1 Summary: Electron Guns and Injector Designs”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 1, pp. 139-144.
- R. Alvarez, R. Borghi, and J. Weaver, “Precision Phase Adjustment of a Linear Accelerator High Power Waveguide Feed Network”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 39-44.
- G. Brown et al., “Operation of PEP in a Low Emittance Mode”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 461-464.
- P. Mortazavi, J. Keane, S. Sharma, and M. Thomas, “Mechanical Design of SXLS Radio-Frequency Cavity”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 263-266.
- F. Furuta et al., “Status and Challenges of Vertical Electro-Polishing R&D at Cornell”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1115-1118.
- R. L. Gluckstern, “Beam Dynamics in Linear Accelerators”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 194-202.
- D. Dunning et al., “The UK XFEL conceptual design and options analysis project”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 754-757.
- G. Wustefeld, J. Feikes, K. Holldack, and P. Kuske, “Sub-Picosecond Electron Bunches in the BESSY Storage Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT051, pp. 1954-1956.
- S. Zelazny et al., “Orbit Display's Use of the Physics Application Framework for LCLS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THC004, pp. 673-675.
- A. Y. Zelinsky, I. V. Drebot, Yu. N. Grigor, R. Tatchyn, and O. D. Zvonarjova, “Radiation of Electron in the Field of Plane Light Wave”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT077, pp. 3997-3999.
- J. L. Baelde et al., “A New Unit Access Control for GANIL and SPIRAL 2”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper G-01, pp. 357-359.
- G. T. Konrad, “High Efficiency, CW, High Power Klystrons for Storage Ring Applications”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1249-1253.
- N. Cutic, C. Erny, F. Lindau, S. Thorin, and S. Werin, “An Electro-optical System for MAX-lab Test-FEL Facility”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC79, pp. 685-687.
- D. D. M. Ho, R. O. Bangertere, S. Brandon, E. P. Lee, and J. W. K. Mark, “Dynamics of Heavy Ion Beams During Longitudinal Compression”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1994-1997.
- M. Popovic et al., “Phase and Frequency Locked Magnetrons for SRF Sources”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP083, pp. 979-981.
Back to search