JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	O. Frasciello, S. Tomassini, M. Zobov, A. Grudiev, N. Mounet, and B. Salvant, “Geometric Beam Coupling Impedance of LHC Secondary Collimators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1677-1679. doi:10.18429/JACoW-IPAC2014-TUPRI049
[n]	G. Balbinot et al., “Beam Diagnostics in the CNAO Injection Lines commissioning”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD31, pp. 119-121. 
[n]	L. Falbo, E. Bressi, and C. Priano, “Improvements on CNAO Accelerator for Ocular Treatments”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1194-1196. doi:10.18429/JACoW-IPAC2017-MOPVA145
[n]	P. K. Saha et al., “Simulation Studies and Measurements of Beam Instabilities Caused by the Kicker Impedance at High Intensities in the 3-GeV RCS of J-PARC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 589-591. doi:10.18429/JACoW-IPAC2016-MOPOR003
[n]	L. Falbo, E. Bressi, M. Pezzetta, and C. Priano, “Btrain Calibration with RF-Master Method”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 679-682. doi:10.18429/JACoW-IPAC2018-TUPAF011
[n]	C. R. Wolf, M. Prechtl, and R. Rue?â, “Simulation and Detection of the Helical Ion-Paths in a Small Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 21-23. doi:10.18429/JACoW-Cyclotrons2016-MOB02
[n]	J. W. Ok et al., “The First Step of RFQ Development in KBSI”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP042, pp. 3829-3831. 
[n]	S. Vitulli, E. Vacchieri, A. Reiter, and B. Schlitt, “LINAC Experience In The First Two Years of Operation @ CNAO (Centro Nazionale Adroterapia Oncologica)”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper TUB04, pp. 129-135. 
[n]	S. Ito, H. Matsuzaki, and A. Morita, “Development of NRA System for a 1.7MV Tandem Accelerator-Human Resource Development Program for Nuclear Engineering, The University of Tokyo”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper TUB01, pp. 115-117. 
[n]	B. Oerter and C. R. Conkling, “Accelerator Timing at Brookhaven National Laboratory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA16, pp. 2226-2228. 
[n]	A. Miura, Y. Kawane, K. Moriya, S. Fukuoka, K. Futatsukawa, and T. Miyao, “Tensile Fracture Test of Metallic Wire of Beam Profile Monitors”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2183-2186. doi:10.18429/JACoW-IPAC2018-WEPAL016
[n]	H. J. Son, H. Jang, S. Lee, and C. W. Son, “Design and Development of the ECR Ion Source Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 356-358. doi:10.18429/JACoW-ICALEPCS2015-MOPGF119
[n]	I. Ortega et al., “Research and development of a radiation hard beam profile monitor for use in the CERN North Area secondary beamlines”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 350-354. doi:10.18429/JACoW-IBIC2025-TUPCO05
[n]	Y. Kotaka, H. Matsuzaki, J.-I. Ohnishi, K. Kamakura, and Y. Sakemi, “Current status of developing pepper-pot emittance monitor for high-intensity ion beam”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 505-509. doi:10.18429/JACoW-IBIC2025-TUPMO19
[n]	E. Vogel, “FLASH progress report”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper MO204, pp. XX-XX. 
[n]	C. Ohmori et al., “Possible Upgrade Scenario for J-PARC Ring RF”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP104, pp. 799-801. 
[n]	C. Priano et al., “CNAO Synchrotron Commissioning”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS007, pp. 2496-2498. 
[n]	V. V. Paramonov, V. Danielyan, A. S. Simonyan, V. M. Tsakanov, and K. Floettmann, “Start of Operation of a Standing Wave Deflecting Cavity With the Minimized Level of Aberrations”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 388-390. doi:10.18429/JACoW-RUPAC2018-WEPSB53
[n]	R. B. Li, X. Y. Bai, X. M. Jin, Q. Ma, C. Qi, and G. Z. Wang, “Analysis of Uncertainty of Dose Rate Measurement on the Accelerator ``QiangGuang-I''”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA028, pp. 3684-3686. 
[n]	T. Matsumoto, T. Abe, H. Masunaga, Y. Furukawa, T. Matsushita, and K. Nakada, “DARUMA: Data Collection and Control Framework For X-Ray Experimental Stations Using MADOCA”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1281-1285. doi:10.18429/JACoW-ICALEPCS2017-THMPL07
[n]	R. P. Wells, B. Ghiorso, F. Sannibale, J. W. Staples, and T. M. Huang, “Design and Fabrication of a VHF - CW High Repetition Rate Electron Gun”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 733-735. doi:10.18429/JACoW-IPAC2014-MOPRI056
[n]	M. Tomizawa, “Overview of beam loss mechanisms in injection and extraction”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEAZ01, pp. 172-176. 
[n]	Y. Petenev, T. Atkinson, A. V. Bondarenko, and A. N. Matveenko, “Analysis of Injection and Recovery Schemes for a Multi-Turn ERL Based Light Source”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper WG203, pp. 32-37. 
[n]	Z. Q. Zhou, H. F. S. Feisi, and W. M. Pan, “Development of Superconducting RF Double Spoke Cavity at IHEP”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2432-2435. doi:10.18429/JACoW-IPAC2018-WEPMF034
[n]	C. K. Kuan et al., “Heat Transfer Analysis of a Water-cooled Channel for the TPS Front End Components”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI072, pp. 3466-3468. 
[n]	D. Bruno, G. Ganetis, R. F. Lambiase, and J. Sandberg, “RHIC Insertion Region, Shunt Power Supply Current Errors”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH003, pp. 3660-3662. 
[n]	E. Algin, B. Akkus, L. Sahin, and H. Cetinkaya, “TAC Proton Accelerator Facility: Normal Conducting Part”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3335-3337. doi:10.18429/JACoW-IPAC2014-THPME049
[n]	L. Falbo, E. Bressi, and C. Priano, “Empty Sweeping Bucket for Slow Extraction”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 676-678. doi:10.18429/JACoW-IPAC2018-TUPAF010
[n]	S. M. Scott, “Training the Next Generation of Engineers for Photon Based Light Sources”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 421-423. doi:10.18429/JACoW-MEDSI2018-THPH40
[n]	B. P. Xiao, G. V. Eremeev, H. L. Phillips, C. E. Reece, and M. J. Kelley, “RF Surface Impedance Characterization of Potential New Materials for SRF-based Accelerators”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB060, pp. 312-314. 
[n]	A. Halavanau et al., “Preliminary Measurement of the Transfer Matrix of a TESLA-type Cavity at FAST”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1632-1634. doi:10.18429/JACoW-IPAC2016-TUPMY038
[n]	Z. Y. Guo et al., “Recent Studies on Beam-Photoelectron Instability in BEPC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRBR3, pp. 633-635. 
[n]	A. J. Dobbs, A. Alekou, and K. R. Long, “The MICE Muon Beamline and Induced Host Accelerator Beam Loss”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP021, pp. 148-150. 
[n]	T. M. Huang et al., “The development of a high power input coupler for China ADS injector I RFQ”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO041, pp. 3857-3859. 
[n]	D. Filippetto et al., “APEX Initial Commissioning Results”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEOAI01, pp. 337-344. 
[n]	K. Fan, K. Ishii, H. Matsumoto, N. Matsumoto, T. Shibata, and T. Sugimoto, “New Design of J-PARC Main Ring Injection System for High Beam Power Operation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2097-2099. doi:10.18429/JACoW-IPAC2014-WEPRO065
[n]	G. Vanbavinckhove et al., “Geometry and Optics of the Electrostatic ELENA Transfer Lines”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO051, pp. 1985-1987. 
[n]	F. Tamura, K. Hasegawa, C. Ohmori, M. Yoshii, and M. M. Paoluzzi, “Beam Test of the CERN PSB Wide-band RF System Prototype in the J-PARC MR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3385-3387. doi:10.18429/JACoW-IPAC2014-THPME065
[n]	K. Kondo, R. Dabrowski, T. Kanesue, and M. Okamura, “Angular Distribution of Laser Ablation Plasma”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC054, pp. 4179-4181. 
[n]	T. Sakai et al., “RF Characteristics of 20K Cryogenic 2.6-cell Photocathode RF-gun Test Cavity”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP106, pp. 671-673. 
[n]	S. Aderhold, “Optical Inspection of SRF Cavities at DESY”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC005, pp. 2896-2898. 
[n]	R. B. Palmer and C. Montag, “Parameters for eRHIC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3038-3040. doi:10.18429/JACoW-IPAC2017-WEPIK050
[n]	T. Sugimoto, K. Ishii, H. Matsumoto, T. Shibata, and K. Fan, “Performance of a Compensation Kicker Magnet for J-PARC Main Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3588-3590. doi:10.18429/JACoW-IPAC2016-THPMW021
[n]	S. Fukuoka, K. Fan, K. Ishii, H. Matsumoto, and T. Sugimoto, “Development of a Fast Compensation Kicker System for J-PARC Main-ring Injection”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA009, pp. 684-686. 
[n]	M. Yoshimoto, H. Harada, M. Kinsho, and K. Yamamoto, “Relation between Signals of the Beam Loss Monitors and Residual Radiation in the J-PARC RCS”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 673-677. doi:10.18429/JACoW-IBIC2016-WEPG22
[n]	X. He, C. Meng, S. Pei, J. L. Wang, O. Xiao, and N. Zhou, “Suppression of Secondary Electron Yield Effect in the 650MHz/800kW Klystron for CEPC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2906-2908. doi:10.18429/JACoW-IPAC2019-WEPRB045
[n]	M.-E. Couprie et al., “The ARC-EN-CIEL Radiation Sources”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC005, pp. 73-75. 
[n]	J. L. Abelleira, S. Russenschuck, F. Zimmermann, C. Milardi, and M. Zobov, “LHC Optics with Crab-waist Collisions and Local Chromatic Correction”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI044, pp. 1448-1450. 
[n]	C. Johnstone, D. V. Neuffer, H. L. Owen, and P. Snopok, “A CW FFAG for Proton Computed Tomography”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR053, pp. 4094-4096. 
[n]	A. Lorsabyan et al., “Yb DOPED HIGH-ENERGY UV ULTRAFAST LASER FOR AREAL FACILITY”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2412-2414. doi:10.18429/JACoW-IPAC2014-WEPME060
[n]	T. Zhang, W. Li, L. Shang, L. Wang, and C.-F. Wu, “Preliminary Study for the HLS Variable Pulse Length Storage Ring by Two Harmonic Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2802-2804. doi:10.18429/JACoW-IPAC2016-WEPOR058
[n]	Y. Li et al., “Applying Cascaded Parameter Scan to Study Top-off Safety in NSLS-II Storage Ring”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP276, pp. 627-629. 
[n]	T. Atkinson, A. V. Bondarenko, A. N. Matveenko, and Y. Petenev, “Feasibility Study of Short Pulse Mode Operation for Multi-turn ERL Light Source”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB036, pp. 255-257. 
[n]	K. Okabe, M. Kinsho, K. Yamamoto, and M. Yoshimoto, “A Preliminary Study of the Vibration Wire Monitor for Beam Halo Diagnostic in J-PARC L3BT”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME028, pp. 535-537. 
[n]	A. A. Gevorgyan, V. S. Avagyan, B. Grigoryan, T. H. Mkrtchyan, A. S. Simonyan, and V. V. Vardanyan, “Design and Performance of Ultimate Vacuum System for the AREAL Test Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2311-2313. doi:10.18429/JACoW-IPAC2014-WEPME025
[n]	T. Eriksson et al., “The ELENA Project: Progress in the Design”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP008, pp. 3740-3742. 
[n]	H. J. Zheng et al., “HOM Parameters Simulation and Measurement Result of the IHEP02 Low-loss Cavity”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO026, pp. 2372-2374. 
[n]	K. Fan, S. Igarashi, K. Ishii, T. Koseki, and M. Uota, “Possibility Study of High Repetition Rate Operation of JPARC Main Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA015, pp. 2528-2530. 
[n]	A. Ciccotelli et al., “Implications of the Upgrade II of LHCb on the LHC Insertion Region 8: From Energy Deposition Studies to Mitigation Strategies”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1679-1682. doi:10.18429/JACoW-IPAC2022-WEPOST003
[n]	F. L. Shang, J. Li, and L. Shang, “The Measurement System of the Electron Gun with Double-anode Structure”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3954-3956. doi:10.18429/JACoW-IPAC2016-THPOW011

For LaTeX

Use Complete Form

For BibTeX

References

Back to search