Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. Trelle et al., “Refurbishment and Reactivation of a Niobium Retort Furnace at DESY”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 485-489. doi:10.18429/JACoW-SRF2023-TUPTB037
[n] L. T. Sun et al., “Status of FECR Ion Source”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper WET2AUCO03, unpublished.
[n] R. K. Reed and J. C. Bell, “Personnel and Machine Protection Systems in The National Ignition Facility (NIF)”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA08, pp. 933-936.
[n] F. Nolden et al., “Stochastic Cooling in the Framework of the FAIR Project at GSI”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP051, pp. 3479-3481.
[n] A. Schwinn et al., “FESA3 ÔÇô The New Front-End Software Framework at CERN and the FAIR Facility”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WECOAA03, pp. 22-26.
[n] W. B. Ingalls, “Recent Operating Experience with the H- Ion Injector at LAMPF/LANSCE”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP24, pp. 704-706.
[n] H. W. Isch, “The First Operational Experience of the LEP Power Converter Systems”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1203-1206.
[n] S. Y. Kazakov, “Pulse Shape Correction for RF Pulse Compression System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1247-1249.
[n] Z. Insepov, V. Ivanov, S. J. Jokela, and M. Wetstein, “Comparison of Back-scattering Properties of Electron Emission Materials”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP005, pp. 817-819.
[n] D. S. Prono, G. J. Caporaso, J. C. Clark, E. J. Lauer, and K. W. Struve, “A Simple Method for Damping Transverse Motion of a High Intensity Electron Beam”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2510-2513.
[n] A. Pazos, P. Duval, S. Fiedler, and U. R. Ristau, “An Embedded Distributed System Based on TINE and Windows CE”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEX04, pp. 148-150.
[n] A. E. Vlieks et al., “High Power Window Tests at SLAC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH073, pp. 942-944.
[n] P. Bosland, M. Couach, F. Guemas, M. Juillard, and A. F. Khoder, “NbTiN Sperconducting Thin Films Prepared by Magnetron Sputtering”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1316-1319.
[n] J. P. Gourber, G. Guignard, A. Hofmann, J. P. Koutchouk, and H. Moshammer, “Compensation of Linear Betatron Coupling in LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1429-1432.
[n] P. Grand, “Vacuum Requirements for Linacs”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 13-01, pp. 421-430.
[n] H. Henke, “Diffraction Radiation by a Charge Sheet Moving Past a Conducting Wedge”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 380-383.
[n] A. Z. Babaian et al., “The Regional Center for Proton Therapy on the Basis of Yerevan Electron Synchrotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2613-2616.
[n] Ye. Fomin, “Machine Learning for the Storage Ring Optimization”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 169-171. doi:10.18429/JACoW-RuPAC2021-MOPSA23
[n] J. Ungrin, B. G. Chidley, J. D. Hepburn, J. H. Ormrod, and M. R. Shubaly, “Chalk River Experience in the Operation of High Current 100% Duty Factor Accelerating Columns”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper C11, pp. 171-174.
[n] S. L. Bogomolov et al., “Recent Development in ECR Ion Sources at FLNR JINR”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper FRYOR01, pp. 203-207.
[n] H. De Gersem, S. Koch, and T. Weiland, “Magnetodynamic Formulation Resolving Eddy-Current Effects in the Yoke and the Superconductive Cable of the FAIR Dipole Magnets”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper TUMPMP02, pp. 90-95.
[n] J. Bradley III, D. Rees, R. Przeklasa, R. Jaitly, G. Schofield, and M. Scott, “Operational Experience with Two Types of 2 MW HVDC Power Supplies on LEDA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP145, pp. 1010-1012.
[n] J. H. Hanten, M. Arnold, J. Birkhan, C. Caliari, N. Pietralla, and M. Steinhorst, “Enhancement of the S-DALINAC Control System with Machine Learning Methods”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 475-478. doi:10.18429/JACoW-IBIC2019-WEBO04
[n] J. Miszczak, “CONTROL SYSTEM FOR THE WARSAW CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P11, pp. XX-XX.
[n] D. B. Hopkins, H. W. Clay, G. Listvinsky, M. A. Makowski, B. W. Stallard, and A. L. Throop, “Engineering Design of the Interaction Waveguide for High-Power Accelerator-Driven Microwave Free-Electron Lasers”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 246-249.
[n] H. Blosser and F. Resmini, “Invited Paper- Progress Report on the 500 MeV Superconducting Cyclotron”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3653-3659.
[n] D. J. Waterman, K. I. Blomqvist, A. Deyhim, J. Kulesza, and E. Van Every, “Development of a Conventional Multipole Wiggler MPW-80”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC110, pp. 2258-2260.
[n] D. Husmann, “Review of CW Electron Machines”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 62-67.
[n] J. Frehaut et al., “Beam Dynamics Studies in a Low-Frequency High-Peak power Laser-Driven RF Gun”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 691-694.
For LaTeX
Use Complete Form
For BibTeX
References
- L. Trelle et al., “Refurbishment and Reactivation of a Niobium Retort Furnace at DESY”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB037, pp. 485-489.
- L. T. Sun et al., “Status of FECR Ion Source”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper WET2AUCO03, unpublished.
- R. K. Reed and J. C. Bell, “Personnel and Machine Protection Systems in The National Ignition Facility (NIF)”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCA08, pp. 933-936.
- F. Nolden et al., “Stochastic Cooling in the Framework of the FAIR Project at GSI”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP051, pp. 3479-3481.
- A. Schwinn et al., “FESA3 ÔÇô The New Front-End Software Framework at CERN and the FAIR Facility”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WECOAA03, pp. 22-26.
- W. B. Ingalls, “Recent Operating Experience with the H- Ion Injector at LAMPF/LANSCE”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP24, pp. 704-706.
- H. W. Isch, “The First Operational Experience of the LEP Power Converter Systems”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1203-1206.
- S. Y. Kazakov, “Pulse Shape Correction for RF Pulse Compression System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1247-1249.
- Z. Insepov, V. Ivanov, S. J. Jokela, and M. Wetstein, “Comparison of Back-scattering Properties of Electron Emission Materials”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP005, pp. 817-819.
- D. S. Prono, G. J. Caporaso, J. C. Clark, E. J. Lauer, and K. W. Struve, “A Simple Method for Damping Transverse Motion of a High Intensity Electron Beam”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2510-2513.
- A. Pazos, P. Duval, S. Fiedler, and U. R. Ristau, “An Embedded Distributed System Based on TINE and Windows CE”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEX04, pp. 148-150.
- A. E. Vlieks et al., “High Power Window Tests at SLAC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH073, pp. 942-944.
- P. Bosland, M. Couach, F. Guemas, M. Juillard, and A. F. Khoder, “NbTiN Sperconducting Thin Films Prepared by Magnetron Sputtering”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1316-1319.
- J. P. Gourber, G. Guignard, A. Hofmann, J. P. Koutchouk, and H. Moshammer, “Compensation of Linear Betatron Coupling in LEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1429-1432.
- P. Grand, “Vacuum Requirements for Linacs”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 13-01, pp. 421-430.
- H. Henke, “Diffraction Radiation by a Charge Sheet Moving Past a Conducting Wedge”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 380-383.
- A. Z. Babaian et al., “The Regional Center for Proton Therapy on the Basis of Yerevan Electron Synchrotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2613-2616.
- Ye. Fomin, “Machine Learning for the Storage Ring Optimization”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 169-171.
- J. Ungrin, B. G. Chidley, J. D. Hepburn, J. H. Ormrod, and M. R. Shubaly, “Chalk River Experience in the Operation of High Current 100% Duty Factor Accelerating Columns”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper C11, pp. 171-174.
- S. L. Bogomolov et al., “Recent Development in ECR Ion Sources at FLNR JINR”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper FRYOR01, pp. 203-207.
- H. De Gersem, S. Koch, and T. Weiland, “Magnetodynamic Formulation Resolving Eddy-Current Effects in the Yoke and the Superconductive Cable of the FAIR Dipole Magnets”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper TUMPMP02, pp. 90-95.
- J. Bradley III, D. Rees, R. Przeklasa, R. Jaitly, G. Schofield, and M. Scott, “Operational Experience with Two Types of 2 MW HVDC Power Supplies on LEDA”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP145, pp. 1010-1012.
- J. H. Hanten, M. Arnold, J. Birkhan, C. Caliari, N. Pietralla, and M. Steinhorst, “Enhancement of the S-DALINAC Control System with Machine Learning Methods”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 475-478.
- J. Miszczak, “CONTROL SYSTEM FOR THE WARSAW CYCLOTRON”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P11, pp. XX-XX.
- D. B. Hopkins, H. W. Clay, G. Listvinsky, M. A. Makowski, B. W. Stallard, and A. L. Throop, “Engineering Design of the Interaction Waveguide for High-Power Accelerator-Driven Microwave Free-Electron Lasers”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 246-249.
- H. Blosser and F. Resmini, “Invited Paper- Progress Report on the 500 MeV Superconducting Cyclotron”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3653-3659.
- D. J. Waterman, K. I. Blomqvist, A. Deyhim, J. Kulesza, and E. Van Every, “Development of a Conventional Multipole Wiggler MPW-80”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC110, pp. 2258-2260.
- D. Husmann, “Review of CW Electron Machines”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 62-67.
- J. Frehaut et al., “Beam Dynamics Studies in a Low-Frequency High-Peak power Laser-Driven RF Gun”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 691-694.
Back to search