JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	G. L. Sabbi et al., “Development of Superconducting Quadrupoles for Heavy Ion Fusion”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH088, pp. 3436-3438. 
[n]	F. FOREST and R. PASQUET, “Design, Manufacturing and Testing  of the two superconducting SUPERBEND magnets  for the upgrade of the Swiss Light Source (SLS) facility at the Paul Sherer Institute (PSI)”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7075, unpublished. 
[n]	F. Chambers et al., “Diagnostics and Data Analysis for the ETA-II Linear Induction Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3085-3088. 
[n]	S. Zheng, H. Chen, Y. Cui, and L. Xiao, “A Quantitative Method of Coupler Cavity Tuning and Simulation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH091, pp. 981-983. 
[n]	A. Lakatos, J. Pozimski, O. Meusel, A. Jakob, and H. Klein, “Study of Space Charge Compensated LEBT for ESS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA90, pp. 1288-1290. 
[n]	Y. C. Chen et al., “Optimization and Upgrade of Slow Extraction Control System for HIRFL CSR Main Ring”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1663-1665. doi:10.18429/JACoW-ICALEPCS2017-THPHA122
[n]	D.-O. Jeon, G. Franchetti, L. Groening, and I. Hofmann, “Prediction of the 4=1 Resonance of a High Intensity Linac”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGB12, pp. 231-234. 
[n]	P. Yuan et al., “Laser Evaporated Aluminium in ECR2 Ion Source”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper F-10, pp. 430-432. 
[n]	J. C. Brown and R. M. Hutcheon, “Design Considerations for a Developmental High Power Coupling Loop to Drive a Resonant Load”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper E11, pp. 180-182. 
[n]	J. Fox, H. Hindi, S. Prabhakar, D. Teytelman, and A. Young, “Calculation of Impedance from Multibunch Synchronous Phases: Theory and Experimental Results”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP33C, pp. 996-998. 
[n]	K. Kiefer et al., “SECoP and SECoP@HMC - Metadata in the Sample Environment Communication Protocol”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1322-1324. doi:10.18429/JACoW-ICALEPCS2023-THPDP014
[n]	L. Harwood, “The JLAB 12 GeV Energy Upgrade of CEBAF”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOZAA1, pp. 36-40. 
[n]	D. Juarez-Lopez, S. Lederer, and R. Wichmann, “The Transverse Energy and Momentum Analyser system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1794-1797. doi:10.18429/JACoW-IPAC2023-TUPL015
[n]	A. A. Asseev and M.Yu. Gorin, “Use of a Bent Crystal for Beam Extraction in a Slow Extraction Mode”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR23, pp. 1955-1957. 
[n]	Y. Lozeev, M. Gusarova, M. A. Guzov, E. N. Indiushnii, A. I. Makarov, and S. M. Polozov, “Optimization of the RFQ Electrode Construction for Multipactor Discharge Prevention”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC11, unpublished. 
[n]	V. Kamerdzhiev, C. B?Âhme, J. Dietrich, P. Forck, T. Giacomini, and D. A. Liakin, “Beam Test of the FAIR IPM Prototype in COSY”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB12, pp. 191-193. 
[n]	W. Lin et al., “Machine-Learning–Assisted Bayesian Uncertainty Quantification for Accelerator Digital Twin Modeling and Control”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6310, unpublished. 
[n]	S. B. Burholt, L. Bobb, and N. Vitoratou, “Performance Evaluation of GAGG+ and Tungsten Carbide Blades in an X-ray Pinhole Camera”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 382-386. doi:10.18429/JACoW-IBIC2023-WEP020
[n]	N. C. Ryder, S. Reiche, and D. J. Scott, “SPUR: A New Code for the Calculation of Synchrotron Radiation from Very Long Undulator Systems”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC128, pp. 2305-2307. 
[n]	N. N. Alexeev et al., “Upgrade of Heavy Ion Injector I-3 at ITEP”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 346-348. doi:10.18429/JACoW-LINAC2018-TUPO011
[n]	P. Pierini et al., “European XFEL 3.9 GHz System”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP011, pp. 100-102. 
[n]	D. Rubin, G. Dugan, A. Mikhailichenko, and J. Rogers, “Dual Aperture High Luminosity Collider at Cornell”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6B010, pp. 318-320. 
[n]	A. L. Romanov, D. R. Edstrom, and A. Halavanau, “Linear Lattice and Trajectory Reconstruction and Correction at FAST Linear Accelerator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1149-1151. doi:10.18429/JACoW-NAPAC2016-THPOA22
[n]	P. Jiang, Y. He, and Z. J. Wang, “Mathematical Principle and Numerical Reconstruction in Real Space Measurement with a Rotating BPM”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 560-562. doi:10.18429/JACoW-LINAC2018-TUPO106
[n]	S. M. Lund and B. Bukh, “Influence of Conducting Plate Boundary Conditions on the RMS Envelope Equations Describing Intense Ion Beam Transport”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG020, pp. 2634-2636. 
[n]	Y. Yang et al., “Initial Beam Commissioning of LEAF at IMP”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 332-335. doi:10.18429/JACoW-LINAC2018-TUPO005
[n]	W. Chou and D. Ritson, “Dynamic Aperture Studies During Collisions in the LHC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P021, pp. 113-115. 
[n]	R. Mitzner, W. Eberhardt, M. Neeb, T. Noll, M. Rutkowski, and H. Zacharias, “A Beam Splitter and Delay Line for Autocorrelation and Pump-Probe Experiments at Soft X-Ray FELs”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH066, pp. XX-XX. 
[n]	X. Fang et al., “Development of a Pepper Pot Probe to Measure the Four-Dimensional Emittance of Low Energy Beam of Electron Cyclotron Resonance Ion Source at IMP”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 57-60. doi:10.18429/JACoW-HIAT2018-MOPB15
[n]	X. Yin et al., “Development of CW Heavy Ion Linac at IMP”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 326-328. doi:10.18429/JACoW-LINAC2018-TUPO003
[n]	V. Kamerdzhiev, J. Dietrich, F. Klehr, and K. Reimers, “Progress with the Scintillation Profile Monitor at COSY”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD51, pp. 164-166. 
[n]	H. Du, Q. Y. Kong, Z. S. Li, K. D. Wang, and X. Yin, “RF Design and Cold Model Measurement of an IH-DTL for HIMM Injector”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 329-331. doi:10.18429/JACoW-LINAC2018-TUPO004
[n]	R. Fabris and P. Tosolini, “Test Results of the 8.35 kA, 15 kV, 10 pps Pulser for the Elettra Kickers”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1333-1336. 
[n]	C. X. Li et al., “RF Design of a Deuteron Beam RFQ”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 996-998. doi:10.18429/JACoW-LINAC2016-THPLR063
[n]	P. Yuan et al., “The Preliminary Explanation of a New Working Model on 10 GHz ECR2 Source”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper F-02, pp. 402-404. 
[n]	T. Manegold et al., “Studies of Collision and Compression of Pulsed Plasmas Generated by Coaxial Accelerators”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1653-1655. doi:10.18429/JACoW-IPAC2018-TUPML051
[n]	S. M. Polozov, W. A. Barth, T. Kulevoy, Y. Lozeev, S. Yaramyshev, and F. D. Dziuba, “Beam Dynamics Study for the New CW RFQ”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 268-270. doi:10.18429/JACoW-RUPAC2016-TUPSA026
[n]	J. J. Barnard et al., “Progress in Heavy Ion Driven Inertial Fusion Energy: From Scaled Experiments to the Integrated Research Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOAA005, pp. 314-318. 
[n]	O. Chorniy, O. Boine-Frankenheim, P. H?â, and P. J. Spiller, “Fast Compression of Intense Heavy-Ion Bunches in SIS-18”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO1D03, pp. 686-690. 
[n]	K. Takata et al., “Disk and Washer Structure for an Electron Storage Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2873-2876. 
[n]	S. A. Gavrilov, P. I. Reinhardt-Nickoulin, and I. V. Vasilyev, “Electrostatic Pick-ups for Debunched Beams at INR Linac”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC43, pp. 420-422. 
[n]	E. Forest, Y. Nogiwa, and F. Schmidt, “The FPP Documentation”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEPPP04, pp. 191-193. 
[n]	S. F. Martins, S. Fonseca, W. Lu, W. B. Mori, and L. O. Silva, “Boosted Frame PIC Simulations of LWFA: Towards the Energy Frontier”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH4GBC05, pp. 3160-3162. 
[n]	R. Barbini, G. Dattoli, T. Letardi, A. Marino, A. Renieri, and G. Vignola, “LEDA-F Storage Ring Dedicated to the Free Electron Laser Operation, Preliminary Design”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3836-3839. 
[n]	D. A. Solnyshkov, A. V. Antonov, A. N. Kuzhlev, N. P. Mikulinas, A. V. Morozov, and G. G. Voronin, “The NG-10 Neutron Generator for Production of Neutron Fluxes in Continuous and Pulse Modes”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC53, pp. 450-452. 
[n]	P. F. Meads, “On the Multiturn Injection of High-Power Beams into an Accumulator Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2767-2769. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search