Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Tawada et al., “Progress of Design Study of Interaction Region Quadrupoles for the SuperKEKB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB034, pp. 346-348.
[n] I. A. Koop, A. P. Lysenko, I. N. Nesterenko, Yu. M. Shatunov, and A. A. Valishev, “Dynamic Aperture of the Storage Ring VEPP-2M in Round Beam Mode”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5V007, pp. 1433-1435.
[n] E. Adli et al., “First Beam Tests of the CLIC Power Extraction Structure with the Two-Beam Test Stand”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD29, pp. 113-115.
[n] G. R. Murdoch, D. Crisp, S. Henderson, M. Holding, K. Potter, and T. Roseberry, “Design amp; Handling of High Activity Collimators amp;Ring Components on the SNS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT172, pp. 2233-2235.
[n] K. Lee, E. Hashimoto, S. Hirai, T. Natsui, M. Uesaka, and T. Yamamoto, “Material Recognition System using 950 keV X-band Linac with Dual Energy X-ray Scintillator Array”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA030, pp. 130-132.
[n] W. S. Gilbert, G. R. Lambertson, and R. B. Meuser, “Eight-Tesla Sychrotron Dipoles - Design Alternatives”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4047-4050.
[n] D. B. Bazyl, H. De Gersem, and W. F. O. M?â, “Upgrade of the Capture Section of the S-DALINAC Injector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 993-995. doi:10.18429/JACoW-IPAC2017-MOPVA055
[n] J. Takano et al., “Field Measurements in the AGS Warm Snake”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT114, pp. 2116-2118.
[n] H. Matsumura et al., “Beam Loss Estimation by Measurement of Secondarily Produced Photons under High Average-current Operations of Compact ERL in KEK”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2711-2714. doi:10.18429/JACoW-IPAC2016-WEPOR020
[n] S. Battisti, J. F. Bottollier, B. Frammery, B. Szeless, and M. Van Rooy, “Beam Instrumentation in the LEP Pre-Injector”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 570-573.
[n] S. Magyary et al., “Operating Experience with a New Accelerator Control System Based upon Microprocessors”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2201-2204.
[n] S. J. Park et al., “Fabrication and Test of Pulsed 200-MW Electron Gun for High-Power Klystrons”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO467, pp. 196-198.
[n] T. Kasuga, “B-Clock System for the KEK Main Ring”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1742-1745.
[n] A. Trisorio, M. C. Divall, C. P. Hauri, C. Vicario, and A. Courjaud, “New Concept for the SwissFEL Gun Laser”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO88, pp. 442-446.
[n] K. Yokoyama et al., “High-Gradient RF Breakdown Studies with Narrow Waveguide”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP028, pp. 879-881.
[n] M. Kumada and K. Nakajima, “Laser FEL”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP112, pp. 2510-2512.
[n] K. Yamada et al., “Construction of Superconducting Linac Booster for Heavy-Ion Linac at RIKEN Nishina Center”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 502-507. doi:10.18429/JACoW-SRF2019-TUP037
[n] M. Galonska, E. Feldmeier, Th. Haberer, A. Peters, and C. Schoemers, “Multi-Energy Trial Operation of the HIT Medical Synchrotron: Accelerator Model and Data Supply”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4644-4646. doi:10.18429/JACoW-IPAC2017-THPVA082
[n] F. Briquez et al., “U15 Design and Construction Progress”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 26-29. doi:10.18429/JACoW-MEDSI2018-TUPH03
[n] A. Sauer, H. Deitinghoff, H. Klein, U. Ratzinger, and R. Tiede, “Particle Dynamics Investigations for a High Current D+ DTL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH302, pp. 3182-3184.
[n] J. X. Wu, F. Caspers, T. Katayama, F. Nolden, J. W. Xia, and Y. Zhang, “Stochastic Cooling Project at the Experimental Storage Ring, CSRe at IMP”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper TUCOB01, pp. 64-66.
[n] J. L. Navarro Quirante et al., “Effect of Beam-Loading on the Breakdown Rate of High Gradient Accelerating Structures”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP033, pp. 499-501.
[n] J.-Y. Raguin, J. Prochnow, and W. Wuensch, “A New Technique to Compute Long-Range Wakefields in Accelerating Structures”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI047, pp. 1661-1663.
[n] G. Azzopardi, A. Muscat, S. Redaelli, B. Salvachua, and G. Valentino, “Operational Results of LHC Collimator Alignment Using Machine Learning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1208-1211. doi:10.18429/JACoW-IPAC2019-TUZZPLM1
[n] J. M. Schippers, “The Beam-Guiding System of AGOR”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XD-04, pp. 615-617.
[n] S. S. Franke et al., “Implementation of Fringe Field Dipole Magnets into the V-Code Beam Dynamics Simulation Tool”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP089, pp. 1738-1740.
[n] E. A. Knapp and W. J. Shlaer, “Design and Initial Performance of a 20 MeV High Current Side Coupled Cavity Electron Accelerator”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper G-6, pp. 635-659.
[n] R. Bonifacio et al., “A Test of Superradiance in an FEL Experiment”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP127G, pp. 745-747.
[n] E. Kako et al., “Advances and Performance of Input Couplers at KEK”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THOBAU02, pp. 485-490.
[n] Y. Hozumi, M. Ikeda, S. Ohsawa, and T. Sugimura, “Development of Electron Gun of Carbon Nanotube Cathode”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP014, pp. 1392-1394.
[n] W. R. DeVan and E. L. Williams Jr, “Plans for the Spallation Neutron Source Integrated Control System Network”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP055, pp. XX-XX.
[n] W. Blokland and S. M. Cousineau, “A Non-Destructive Profile Monitor for High Intensity Beams”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOCN2, pp. 1438-1442.
[n] C. Montag, B. Parker, S. Tepikian, and D. Wang, “Interaction Region Design for the Electron-Ion Collider eRHIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP045, pp. 2893-2895.
[n] C. Bravo, D. Maselli, G. Mazzitelli, T. Tonus, and A. Camiletti, “Accelerator Trouble Ticket”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA39, pp. 600-602.
[n] J. T. M. Lyles, F. Bridges, and L. J. Rybarcyk, “Ferrite Evaluation for AHF Proton Synchrotrons”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE006, pp. 1092-1094.
[n] K. J. Bertsche, H. Loos, H.-D. Nuhn, and F. Peters, “Fast Beam-Based BPM Calibration”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD26, pp. 289-291.
[n] T. Mastorides et al., “LHC Beam Diffusion Dependence on RF Noise: Models and Measurements”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA062, pp. 1476-1478.
[n] J. A. Martin, “Beam Extraction from Sector - Focused Cyclotrons”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63B01, pp. XX-XX.
[n] R. Nassiri, Z. C. Liu, and G. J. Waldschmidt, “Superconducting 5-Cell Cavity Design and Copper Prototype Cavity for an Energy Recovery Linac at the Advanced Photon Source”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO001, pp. 510-513.
[n] A. Paal, A. Simonsson, A. K?ñllberg, J. Dietrich, and I. Mohos, “Current Measurements of Low-Intensity Beams at CRYRING”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT28, pp. XX-XX.
[n] E. Vogel et al., “Beam Loading Compensation Using Real Time Bunch Charge Information from a Toroid Monitor at FLASH”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN012, pp. 2074-2076.
[n] E. Levitan, J. Degani, and J. Zak, “Regularization in Fourier-Synthesis 2-D Image Reconstruction”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4327-4330.
[n] T. Kanai, K. Awazu, and S. Suzuki, “Free Electron Laser Pulse Control by Acousto-Optic Modulators”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH046, pp. 427-430.
[n] M. Kanazawa, K. Katsuki, T. Misu, and A. Sugiura, “RF Cavity with Co-based Amorphous Core”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUOCFI03, pp. 983-985.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Tawada et al., “Progress of Design Study of Interaction Region Quadrupoles for the SuperKEKB”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB034, pp. 346-348.
- I. A. Koop, A. P. Lysenko, I. N. Nesterenko, Yu. M. Shatunov, and A. A. Valishev, “Dynamic Aperture of the Storage Ring VEPP-2M in Round Beam Mode”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5V007, pp. 1433-1435.
- E. Adli et al., “First Beam Tests of the CLIC Power Extraction Structure with the Two-Beam Test Stand”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD29, pp. 113-115.
- G. R. Murdoch, D. Crisp, S. Henderson, M. Holding, K. Potter, and T. Roseberry, “Design amp; Handling of High Activity Collimators amp;Ring Components on the SNS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT172, pp. 2233-2235.
- K. Lee, E. Hashimoto, S. Hirai, T. Natsui, M. Uesaka, and T. Yamamoto, “Material Recognition System using 950 keV X-band Linac with Dual Energy X-ray Scintillator Array”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA030, pp. 130-132.
- W. S. Gilbert, G. R. Lambertson, and R. B. Meuser, “Eight-Tesla Sychrotron Dipoles - Design Alternatives”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4047-4050.
- D. B. Bazyl, H. De Gersem, and W. F. O. M?â, “Upgrade of the Capture Section of the S-DALINAC Injector”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 993-995.
- J. Takano et al., “Field Measurements in the AGS Warm Snake”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT114, pp. 2116-2118.
- H. Matsumura et al., “Beam Loss Estimation by Measurement of Secondarily Produced Photons under High Average-current Operations of Compact ERL in KEK”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2711-2714.
- S. Battisti, J. F. Bottollier, B. Frammery, B. Szeless, and M. Van Rooy, “Beam Instrumentation in the LEP Pre-Injector”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 570-573.
- S. Magyary et al., “Operating Experience with a New Accelerator Control System Based upon Microprocessors”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2201-2204.
- S. J. Park et al., “Fabrication and Test of Pulsed 200-MW Electron Gun for High-Power Klystrons”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO467, pp. 196-198.
- T. Kasuga, “B-Clock System for the KEK Main Ring”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1742-1745.
- A. Trisorio, M. C. Divall, C. P. Hauri, C. Vicario, and A. Courjaud, “New Concept for the SwissFEL Gun Laser”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO88, pp. 442-446.
- K. Yokoyama et al., “High-Gradient RF Breakdown Studies with Narrow Waveguide”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP028, pp. 879-881.
- M. Kumada and K. Nakajima, “Laser FEL”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP112, pp. 2510-2512.
- K. Yamada et al., “Construction of Superconducting Linac Booster for Heavy-Ion Linac at RIKEN Nishina Center”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 502-507.
- M. Galonska, E. Feldmeier, Th. Haberer, A. Peters, and C. Schoemers, “Multi-Energy Trial Operation of the HIT Medical Synchrotron: Accelerator Model and Data Supply”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4644-4646.
- F. Briquez et al., “U15 Design and Construction Progress”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 26-29.
- A. Sauer, H. Deitinghoff, H. Klein, U. Ratzinger, and R. Tiede, “Particle Dynamics Investigations for a High Current D+ DTL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH302, pp. 3182-3184.
- J. X. Wu, F. Caspers, T. Katayama, F. Nolden, J. W. Xia, and Y. Zhang, “Stochastic Cooling Project at the Experimental Storage Ring, CSRe at IMP”, in Proc. 8th Workshop on Beam Cooling and Related Topics (COOL'11), Alushta, Ukraine, Sep. 2011, paper TUCOB01, pp. 64-66.
- J. L. Navarro Quirante et al., “Effect of Beam-Loading on the Breakdown Rate of High Gradient Accelerating Structures”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP033, pp. 499-501.
- J.-Y. Raguin, J. Prochnow, and W. Wuensch, “A New Technique to Compute Long-Range Wakefields in Accelerating Structures”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI047, pp. 1661-1663.
- G. Azzopardi, A. Muscat, S. Redaelli, B. Salvachua, and G. Valentino, “Operational Results of LHC Collimator Alignment Using Machine Learning”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1208-1211.
- J. M. Schippers, “The Beam-Guiding System of AGOR”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XD-04, pp. 615-617.
- S. S. Franke et al., “Implementation of Fringe Field Dipole Magnets into the V-Code Beam Dynamics Simulation Tool”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP089, pp. 1738-1740.
- E. A. Knapp and W. J. Shlaer, “Design and Initial Performance of a 20 MeV High Current Side Coupled Cavity Electron Accelerator”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper G-6, pp. 635-659.
- R. Bonifacio et al., “A Test of Superradiance in an FEL Experiment”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP127G, pp. 745-747.
- E. Kako et al., “Advances and Performance of Input Couplers at KEK”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THOBAU02, pp. 485-490.
- Y. Hozumi, M. Ikeda, S. Ohsawa, and T. Sugimura, “Development of Electron Gun of Carbon Nanotube Cathode”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP014, pp. 1392-1394.
- W. R. DeVan and E. L. Williams Jr, “Plans for the Spallation Neutron Source Integrated Control System Network”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP055, pp. XX-XX.
- W. Blokland and S. M. Cousineau, “A Non-Destructive Profile Monitor for High Intensity Beams”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOCN2, pp. 1438-1442.
- C. Montag, B. Parker, S. Tepikian, and D. Wang, “Interaction Region Design for the Electron-Ion Collider eRHIC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP045, pp. 2893-2895.
- C. Bravo, D. Maselli, G. Mazzitelli, T. Tonus, and A. Camiletti, “Accelerator Trouble Ticket”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA39, pp. 600-602.
- J. T. M. Lyles, F. Bridges, and L. J. Rybarcyk, “Ferrite Evaluation for AHF Proton Synchrotrons”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE006, pp. 1092-1094.
- K. J. Bertsche, H. Loos, H.-D. Nuhn, and F. Peters, “Fast Beam-Based BPM Calibration”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUPD26, pp. 289-291.
- T. Mastorides et al., “LHC Beam Diffusion Dependence on RF Noise: Models and Measurements”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA062, pp. 1476-1478.
- J. A. Martin, “Beam Extraction from Sector - Focused Cyclotrons”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63B01, pp. XX-XX.
- R. Nassiri, Z. C. Liu, and G. J. Waldschmidt, “Superconducting 5-Cell Cavity Design and Copper Prototype Cavity for an Energy Recovery Linac at the Advanced Photon Source”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO001, pp. 510-513.
- A. Paal, A. Simonsson, A. K?ñllberg, J. Dietrich, and I. Mohos, “Current Measurements of Low-Intensity Beams at CRYRING”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PT28, pp. XX-XX.
- E. Vogel et al., “Beam Loading Compensation Using Real Time Bunch Charge Information from a Toroid Monitor at FLASH”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN012, pp. 2074-2076.
- E. Levitan, J. Degani, and J. Zak, “Regularization in Fourier-Synthesis 2-D Image Reconstruction”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4327-4330.
- T. Kanai, K. Awazu, and S. Suzuki, “Free Electron Laser Pulse Control by Acousto-Optic Modulators”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH046, pp. 427-430.
- M. Kanazawa, K. Katsuki, T. Misu, and A. Sugiura, “RF Cavity with Co-based Amorphous Core”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUOCFI03, pp. 983-985.
Back to search