Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. E. Griffin, J. F. Bridges, and J. A. MacLachlan, “Review of the Fermilab Main Ring Accelerator Study Program as Directed to the PPbar Program”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2040-2043.
[n] P. F. Dahl, S. Giordano, J. P. Hannwacker, K. Jellett, G. Parzen, and D. E. Young, “Linac Cavity Field Calculations”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper III-06, pp. 115-118.
[n] L. J. Fulop et al., “ELI-ALPS Control System Status Report”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 216-220. doi:10.18429/JACoW-ICALEPCS2015-MOPGF051
[n] S. Wang, R. Li, R. A. Rimmer, H. Wang, and Y. Zhang, “Rf System Requirements for JLab's MEIC Collider Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO077, pp. 2477-2479.
[n] M. J. Barnes, F. Caspers, L. Ducimeti?¿re, N. Garrel, and T. Kroyer, “The Beam Screen for the LHC Injection Kicker Magnets”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS011, pp. 1508-1510.
[n] R. Gerig, C. Moore, and S. Pruss, “Beam Quality Measurements in Fermilab Main Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2177-2180.
[n] R. D. Kohaupt, “The Experimental Study of a Higher Harmonic rf System in PETRA”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2525-2528.
[n] P. F. Dahl, R. Christian, and G. Parzen, “Computer Calculations of the Magnetic Field of Alternating Gradient Synchrotron Magnets”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 408-412.
[n] R. Frankel, “Experiments in Computer Control and Analysis of the AGS”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1042-1044.
[n] A. R. Bainbridge, J. A. Clarke, B. J. A. Shepherd, N. A. Collomb, and M. Modena, “The ZEPTO Dipole: Zero Power Tuneable Optics for CLIC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4338-4341. doi:10.18429/JACoW-IPAC2017-THPIK105
[n] L. Ducimetiere, M. J. Barnes, N. Garrel, and G. D. Wait, “The LHC Injection Kicker Magnet”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE036, pp. 1162-1164.
[n] V. Agoritsas et al., “Measurement and Monitoring of the Ejected Proton Beam 58" of the CERN Proton Synchrotron"”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1155-1161.
[n] C. W. Potts, F. R. Brumwell, Y. Cho, A. V. Rauchas, and G. J. Volk, “Status Report on the Rapid Cycling Synchrotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2104-2107.
[n] S. Ramamoorthy, P. Pearson, and J. Smith, “Error Handling in the NSLS Control System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR07, pp. 2250-2252.
[n] M. Doleans et al., “Status Report on the NSCL RF Fragment Separator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS039, pp. 3585-3587.
[n] J. J. Petillo et al., “The MICHELLE Electron Gun and Collector Modeling Tool”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH090, pp. 3054-3056.
[n] R. L. Keizer et al., “Design and Performance of a Prototype Synchronous High Tension Discharge Switch for the Separation System of the LEP ee- Collider”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1190-1193.
[n] Y. C. Yang, C. K. Chan, J.-R. Chen, C. M. Cheng, and G.-Y. Hsiung, “Design of the Water-Cooling System for the Vacuum System of the TPS Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD022, pp. 2546-2548.
[n] S. Lenci, E. Eisen, and B. Stockwell, “Development of An 805-MHz, 550 kW Pulsed Klystron for The Spallation Neutron Source”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU484, pp. 512-514.
[n] K. Yu, S. W. Quan, W. Xu, K. Zhao, F. Zhu, and J. Zhuang, “The PKU Terahertz Facility at Peking University”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP036, pp. 2343-2345.
[n] R. Gerig, S. Pruss, and F. Turkot, “Simulations of the Fermilab Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1123-1126.
[n] A. Dworak, P. Charrue, F. Ehm, W. Sliwinski, and M. Sobczak, “Middleware Trends and Market Leaders 2011”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRBHMULT05, pp. 1334-1337.
[n] X. Wang, X. Jiao, H. Liu, V. Samulyak, and K. Yu, “Optimal Generalized Finite Difference Solution to the Particle-in-Cell Problem”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 77-79. doi:10.18429/JACoW-IPAC2015-MOPWA003
[n] J. Miertusova, F. Daclon, and F. Giacuzzo, “Experience with the ELETTRA Vacuum System during Commissioning”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2470-2473.
[n] J. E. Griffin, J. F. Bridges, and J. A. MacLachlan, “Preparation and Study of Bunches Containing 1011Protons in the Fermilab Main Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2037-2040.
[n] Z. Xu et al., “Software Upgrade of Beam Diagnostics Readout System Based on PXIe Hardware”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 109-113. doi:10.18429/JACoW-IBIC2025-MOPCO18
[n] J. E. Allinger, G. T. Danby, J. W. Jackson, I. Polk, and A. Prodell, “High Field Iron Magnets for Operation at Cyrogenic Temperatures”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 728-734.
[n] D. Rees et al., “Design, Operation, and Test Results of 350 MHz LEDA RF System”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4072, pp. 564-566.
[n] Z. M. Dai, D. K. Liu, L. G. Liu, L. Yin, and Z. T. Zhao, “Status of the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC008, pp. 1998-2000.
[n] R. Frankel, W. Buxton, K. Kohler, R. Warkentien, and A. White, “Relway": A Process Data Highway System Optimized for Accelerators"”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2150-2153.
[n] W. X. Cheng, K. Ha, Y. Tian, and L.-H. Yu, “Precise Beam Orbit Response Measurement with AC Excitation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 380-382. doi:10.18429/JACoW-IPAC2016-MOPMR058
[n] J. Wei et al., “Experimental Study of Slow-Rate Transition Crossing in AGS”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 976-979.
[n] B. K. Stillwell, B. Brajuskovic, H. Cease, D. L. Fallin, J. R. Noonan, and M. M. O, “Conceptual Design of a Storage Ring Vacuum System Compatible with Implementation of a Seven Bend Achromat Lattice at the APS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2409-2411. doi:10.18429/JACoW-IPAC2014-WEPME059
[n] E. Karantzoulis, A. Carniel, S. Ferry, and S. Krecic, “Operational Advances at Elettra and its New Full Energy Injector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP020, pp. 2309-2311.
[n] S. Cousineau et al., “Measurement of Space Charge Effect on Transverse Emittance”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH028, pp. 2911-2913.
[n] E. Baron et al., “High Intensity Heavy Ion Beams for Exotic Nuclei Production at GANIL”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper L-2, pp. XX-XX.
[n] R. Li, C. L. Guo, M. M. Huang, and T. J. Shen, “Operation Status of SSRF Power Supplies and Interlocks for Top-up Operation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO007, pp. 3349-3351.
[n] M. Sekoranja, S. Hunt, and A. Luedeke, “VisualDCT - Visual EPICS Database Configuration Tool”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP029, pp. XX-XX.
[n] K. S. B. Li et al., “Low Emittance X-FEL Development”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP016, pp. XX-XX.
[n] S. Battisti, P. Heymans, J. Kenaghan, J. Philippe, F. Rohner, and E. Sigaud, “A Flexible Wide-Band Analouge Network for Direct Signal Display on Operator Consoles”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2189-2192.
[n] S. I. Tomin and A. G. Valentinov, “On-line Beam Control with Ocelot at Siberia-2”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 289-291. doi:10.18429/JACoW-IPAC2014-MOPRO086
[n] C. Wiesner et al., “Experimental Performance of an EB Chopper System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3244-3246. doi:10.18429/JACoW-IPAC2014-THPME015
[n] E. Pozdeyev et al., “Beam Commissioning and Integrated Test of the PIP-II Injector Test Facility”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 13-17. doi:10.18429/JACoW-LINAC2022-MO1PA01
For LaTeX
Use Complete Form
For BibTeX
References
- J. E. Griffin, J. F. Bridges, and J. A. MacLachlan, “Review of the Fermilab Main Ring Accelerator Study Program as Directed to the PPbar Program”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2040-2043.
- P. F. Dahl, S. Giordano, J. P. Hannwacker, K. Jellett, G. Parzen, and D. E. Young, “Linac Cavity Field Calculations”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper III-06, pp. 115-118.
- L. J. Fulop et al., “ELI-ALPS Control System Status Report”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 216-220.
- S. Wang, R. Li, R. A. Rimmer, H. Wang, and Y. Zhang, “Rf System Requirements for JLab's MEIC Collider Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO077, pp. 2477-2479.
- M. J. Barnes, F. Caspers, L. Ducimeti?¿re, N. Garrel, and T. Kroyer, “The Beam Screen for the LHC Injection Kicker Magnets”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS011, pp. 1508-1510.
- R. Gerig, C. Moore, and S. Pruss, “Beam Quality Measurements in Fermilab Main Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2177-2180.
- R. D. Kohaupt, “The Experimental Study of a Higher Harmonic rf System in PETRA”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2525-2528.
- P. F. Dahl, R. Christian, and G. Parzen, “Computer Calculations of the Magnetic Field of Alternating Gradient Synchrotron Magnets”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 408-412.
- R. Frankel, “Experiments in Computer Control and Analysis of the AGS”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1042-1044.
- A. R. Bainbridge, J. A. Clarke, B. J. A. Shepherd, N. A. Collomb, and M. Modena, “The ZEPTO Dipole: Zero Power Tuneable Optics for CLIC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4338-4341.
- L. Ducimetiere, M. J. Barnes, N. Garrel, and G. D. Wait, “The LHC Injection Kicker Magnet”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE036, pp. 1162-1164.
- V. Agoritsas et al., “Measurement and Monitoring of the Ejected Proton Beam 58" of the CERN Proton Synchrotron"”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1155-1161.
- C. W. Potts, F. R. Brumwell, Y. Cho, A. V. Rauchas, and G. J. Volk, “Status Report on the Rapid Cycling Synchrotron”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2104-2107.
- S. Ramamoorthy, P. Pearson, and J. Smith, “Error Handling in the NSLS Control System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR07, pp. 2250-2252.
- M. Doleans et al., “Status Report on the NSCL RF Fragment Separator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS039, pp. 3585-3587.
- J. J. Petillo et al., “The MICHELLE Electron Gun and Collector Modeling Tool”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH090, pp. 3054-3056.
- R. L. Keizer et al., “Design and Performance of a Prototype Synchronous High Tension Discharge Switch for the Separation System of the LEP ee- Collider”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1190-1193.
- Y. C. Yang, C. K. Chan, J.-R. Chen, C. M. Cheng, and G.-Y. Hsiung, “Design of the Water-Cooling System for the Vacuum System of the TPS Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD022, pp. 2546-2548.
- S. Lenci, E. Eisen, and B. Stockwell, “Development of An 805-MHz, 550 kW Pulsed Klystron for The Spallation Neutron Source”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU484, pp. 512-514.
- K. Yu, S. W. Quan, W. Xu, K. Zhao, F. Zhu, and J. Zhuang, “The PKU Terahertz Facility at Peking University”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP036, pp. 2343-2345.
- R. Gerig, S. Pruss, and F. Turkot, “Simulations of the Fermilab Main Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1123-1126.
- A. Dworak, P. Charrue, F. Ehm, W. Sliwinski, and M. Sobczak, “Middleware Trends and Market Leaders 2011”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRBHMULT05, pp. 1334-1337.
- X. Wang, X. Jiao, H. Liu, V. Samulyak, and K. Yu, “Optimal Generalized Finite Difference Solution to the Particle-in-Cell Problem”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 77-79.
- J. Miertusova, F. Daclon, and F. Giacuzzo, “Experience with the ELETTRA Vacuum System during Commissioning”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2470-2473.
- J. E. Griffin, J. F. Bridges, and J. A. MacLachlan, “Preparation and Study of Bunches Containing 1011Protons in the Fermilab Main Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2037-2040.
- Z. Xu et al., “Software Upgrade of Beam Diagnostics Readout System Based on PXIe Hardware”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 109-113.
- J. E. Allinger, G. T. Danby, J. W. Jackson, I. Polk, and A. Prodell, “High Field Iron Magnets for Operation at Cyrogenic Temperatures”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 728-734.
- D. Rees et al., “Design, Operation, and Test Results of 350 MHz LEDA RF System”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4072, pp. 564-566.
- Z. M. Dai, D. K. Liu, L. G. Liu, L. Yin, and Z. T. Zhao, “Status of the SSRF Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC008, pp. 1998-2000.
- R. Frankel, W. Buxton, K. Kohler, R. Warkentien, and A. White, “Relway": A Process Data Highway System Optimized for Accelerators"”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2150-2153.
- W. X. Cheng, K. Ha, Y. Tian, and L.-H. Yu, “Precise Beam Orbit Response Measurement with AC Excitation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 380-382.
- J. Wei et al., “Experimental Study of Slow-Rate Transition Crossing in AGS”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 976-979.
- B. K. Stillwell, B. Brajuskovic, H. Cease, D. L. Fallin, J. R. Noonan, and M. M. O, “Conceptual Design of a Storage Ring Vacuum System Compatible with Implementation of a Seven Bend Achromat Lattice at the APS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2409-2411.
- E. Karantzoulis, A. Carniel, S. Ferry, and S. Krecic, “Operational Advances at Elettra and its New Full Energy Injector”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP020, pp. 2309-2311.
- S. Cousineau et al., “Measurement of Space Charge Effect on Transverse Emittance”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH028, pp. 2911-2913.
- E. Baron et al., “High Intensity Heavy Ion Beams for Exotic Nuclei Production at GANIL”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper L-2, pp. XX-XX.
- R. Li, C. L. Guo, M. M. Huang, and T. J. Shen, “Operation Status of SSRF Power Supplies and Interlocks for Top-up Operation”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO007, pp. 3349-3351.
- M. Sekoranja, S. Hunt, and A. Luedeke, “VisualDCT - Visual EPICS Database Configuration Tool”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP029, pp. XX-XX.
- K. S. B. Li et al., “Low Emittance X-FEL Development”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP016, pp. XX-XX.
- S. Battisti, P. Heymans, J. Kenaghan, J. Philippe, F. Rohner, and E. Sigaud, “A Flexible Wide-Band Analouge Network for Direct Signal Display on Operator Consoles”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2189-2192.
- S. I. Tomin and A. G. Valentinov, “On-line Beam Control with Ocelot at Siberia-2”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 289-291.
- C. Wiesner et al., “Experimental Performance of an EB Chopper System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3244-3246.
- E. Pozdeyev et al., “Beam Commissioning and Integrated Test of the PIP-II Injector Test Facility”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 13-17.
Back to search