Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Plesko and G. Tkacik, “A Reflection on Introspection”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP540, pp. XX-XX.
[n] J. Schipper et al., “The Low-Level Control System for the CERN PS Multi-Turn Extraction Kickers”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP065, pp. 528-530.
[n] P. W. Allison, D. B. Holtkamp, and J. D. Sherman, “An Emittance Scanner for Intense Low-Energy Ion Beams”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2204-2207.
[n] A. Regan and C. Ziomek, “APT LLRF Control System Model Results”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P044, pp. 2338-2340.
[n] N. Hauser et al., “Common Data Model ; A Unified Layer to Access Data from Data Analysis Point of View”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHAUST03, pp. 1220-1223.
[n] G. Chiozzi et al., “The ALMA Common Software (ACS): Status and Developments”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP703, pp. XX-XX.
[n] V. G. Dudnikov, G. Dudnikova, R. P. Johnson, M. P. Stockli, and R. F. Welton, “RF H- Ion Source with Saddle Antenna”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC073, pp. 4226-4228.
[n] E. L. Garwin, W. B. Herrmannsfeldt, C. Sinclair, J. N. Weaver, J. J. Welch, and P. B. Wilson, “An Experimental Program to Build a Multimegawatt Lasertron for Super Linear Colliders”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2906-2909.
[n] K. N. Sanosyan, M. Ivanyan, and R. Mikaelyan, “Radiation Safety Considerations for CANDLE Light Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE078, pp. 2667-2669.
[n] J. S. Chai, J. H. Ha, Y. S. Kim, D. S. Ahn, S. B. Hong, and K. H. Kwon, “Beam Transport System Using Fuzzy Controller in the KCCH Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-38, pp. 310-313.
[n] S. P. Antipov, R. A. Kostin, S. V. Kuzikov, and V. A. Dolgashev, “High Shunt Impedance Accelerating Structure with Distributed Microwave Coupling”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2531-2533. doi:10.18429/JACoW-IPAC2018-WEPMF069
[n] I. Bolotin, V. Budilin, A. Glazov, V. Krasnopolsky, and V. Skuratov, “Ferromagentic Cores Made from Amorphous Material for Broad-Band Accelerating System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR19, pp. 1833-1834.
[n] R. Keller, P. Allison, and J. D. Sherman, “Use of a Minimum-Elipse Criterion in the Study of Ion-Beam Extraction Systems”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2579-2582.
[n] L. Sepetavc, J. Dedic, R. Tavcar, J. Gutleber, and R. Moser, “Synchronously Driven Power Converter Controller Solution for MedAustron”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN016, pp. 912-915.
[n] M. McCarthy et al., “Response of the RF Power System to Off-Normal Conditions on APT”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA1, pp. 1061-1063.
[n] D. Goetz, J. Grillenberger, M. Humbel, R. Kan, M. Schneider, L. Stingelin, and H. Zhang, “Disturbance Effects Caused by RF Power Leaking Out From Cavities in the PSI Ringcyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper WEM2CCO03, pp. 341-343.
[n] K. Wootton and X. Shi, “Measurements of ultralow emittance and transverse coherence at the Advanced Photon Source Upgrade storage ring”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 658-664. doi:10.18429/JACoW-NAPAC2025-WEYN03
[n] K. Zagar et al., “Packaging of Control System Software”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU040, pp. 1168-1170.
[n] W. A. H. Rogers, T. J. R. Nicholls, and A. A. Wilson, “pyAT, Pytac and pythonSoftIoc: a Pure Python Virtual Accelerator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 231. doi:10.18429/JACoW-ICALEPCS2019-MOPHA017
[n] E. Onillon, “Feedback Design Method Review and Comparison”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA17, pp. 1109-1111.
[n] M. Ounsy, S. Pierre-Joseph Zephir, G. Viguier, and E. De Ley, “Using an Expert System for Accelerators Tuning and Automation of Operating Failure Checks”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOCB04, pp. 1434-1437.
[n] L. Grisham, S. K. Hahto, S. T. Hahto, J. Kwan, and K. N. Leung, “Proof-of-Concept Experiments for Negative Ion Driver Beams for Heavy Ion Fusion”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB010, pp. 3309-3311.
[n] P. Goudket et al., “Surface Resistance RF Measurements of Materials Used for Accelerator Vacuum Chambers”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3235-3238. doi:10.18429/JACoW-IPAC2015-WEPHA053
[n] G. De Ninno, W. M. Fawley, and W. Graves, “Optimization Studies of the FERMI at ELETTRA FEL Design”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP013, pp. XX-XX.
[n] C. Moore et al., “Dependence of the Emittances of the Fermilab Injectors on Intensity”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3000-3002.
[n] I. Kriznar, M. Plesko, M. Sekoranja, P. Kolaric, and W. Mexner, “Migration From ACS 1.1 to ACS 4 at ANKA”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_100.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Plesko and G. Tkacik, “A Reflection on Introspection”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP540, pp. XX-XX.
- J. Schipper et al., “The Low-Level Control System for the CERN PS Multi-Turn Extraction Kickers”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP065, pp. 528-530.
- P. W. Allison, D. B. Holtkamp, and J. D. Sherman, “An Emittance Scanner for Intense Low-Energy Ion Beams”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2204-2207.
- A. Regan and C. Ziomek, “APT LLRF Control System Model Results”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P044, pp. 2338-2340.
- N. Hauser et al., “Common Data Model ; A Unified Layer to Access Data from Data Analysis Point of View”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THCHAUST03, pp. 1220-1223.
- G. Chiozzi et al., “The ALMA Common Software (ACS): Status and Developments”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP703, pp. XX-XX.
- V. G. Dudnikov, G. Dudnikova, R. P. Johnson, M. P. Stockli, and R. F. Welton, “RF H- Ion Source with Saddle Antenna”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC073, pp. 4226-4228.
- E. L. Garwin, W. B. Herrmannsfeldt, C. Sinclair, J. N. Weaver, J. J. Welch, and P. B. Wilson, “An Experimental Program to Build a Multimegawatt Lasertron for Super Linear Colliders”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2906-2909.
- K. N. Sanosyan, M. Ivanyan, and R. Mikaelyan, “Radiation Safety Considerations for CANDLE Light Source”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE078, pp. 2667-2669.
- J. S. Chai, J. H. Ha, Y. S. Kim, D. S. Ahn, S. B. Hong, and K. H. Kwon, “Beam Transport System Using Fuzzy Controller in the KCCH Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-38, pp. 310-313.
- S. P. Antipov, R. A. Kostin, S. V. Kuzikov, and V. A. Dolgashev, “High Shunt Impedance Accelerating Structure with Distributed Microwave Coupling”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2531-2533.
- I. Bolotin, V. Budilin, A. Glazov, V. Krasnopolsky, and V. Skuratov, “Ferromagentic Cores Made from Amorphous Material for Broad-Band Accelerating System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR19, pp. 1833-1834.
- R. Keller, P. Allison, and J. D. Sherman, “Use of a Minimum-Elipse Criterion in the Study of Ion-Beam Extraction Systems”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2579-2582.
- L. Sepetavc, J. Dedic, R. Tavcar, J. Gutleber, and R. Moser, “Synchronously Driven Power Converter Controller Solution for MedAustron”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN016, pp. 912-915.
- M. McCarthy et al., “Response of the RF Power System to Off-Normal Conditions on APT”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA1, pp. 1061-1063.
- D. Goetz, J. Grillenberger, M. Humbel, R. Kan, M. Schneider, L. Stingelin, and H. Zhang, “Disturbance Effects Caused by RF Power Leaking Out From Cavities in the PSI Ringcyclotron”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper WEM2CCO03, pp. 341-343.
- K. Wootton and X. Shi, “Measurements of ultralow emittance and transverse coherence at the Advanced Photon Source Upgrade storage ring”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 658-664.
- K. Zagar et al., “Packaging of Control System Software”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU040, pp. 1168-1170.
- W. A. H. Rogers, T. J. R. Nicholls, and A. A. Wilson, “pyAT, Pytac and pythonSoftIoc: a Pure Python Virtual Accelerator”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 231.
- E. Onillon, “Feedback Design Method Review and Comparison”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA17, pp. 1109-1111.
- M. Ounsy, S. Pierre-Joseph Zephir, G. Viguier, and E. De Ley, “Using an Expert System for Accelerators Tuning and Automation of Operating Failure Checks”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOCB04, pp. 1434-1437.
- L. Grisham, S. K. Hahto, S. T. Hahto, J. Kwan, and K. N. Leung, “Proof-of-Concept Experiments for Negative Ion Driver Beams for Heavy Ion Fusion”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB010, pp. 3309-3311.
- P. Goudket et al., “Surface Resistance RF Measurements of Materials Used for Accelerator Vacuum Chambers”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3235-3238.
- G. De Ninno, W. M. Fawley, and W. Graves, “Optimization Studies of the FERMI at ELETTRA FEL Design”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP013, pp. XX-XX.
- C. Moore et al., “Dependence of the Emittances of the Fermilab Injectors on Intensity”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3000-3002.
- I. Kriznar, M. Plesko, M. Sekoranja, P. Kolaric, and W. Mexner, “Migration From ACS 1.1 to ACS 4 at ANKA”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_100.
Back to search