Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Waghmare and D. Rai, “Predicting LANSCE klystron health and performance”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB080, unpublished.
[n] K. Eppley, J. Feinstein, K. Ko, N. Kroll, T. Lee, and E. Nelson, “A High Power Cross-Field Amplifier at X-Band”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 719-722.
[n] J. A. Ferreira Somoza and P. Chiggiato, “CERN Vacuum System Activities during the Long Shutdown 1: The LHC's injector chain.”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2291-2293. doi:10.18429/JACoW-IPAC2014-WEPME018
[n] J. Mondal, G. Ciovati, P. Kneisel, K. C. Mittal, and R. Myneni, “Characterization of Ingot Material for SRF Cavity Production”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THOAAU01, pp. 455-461.
[n] A. Waghmare, C. Richman, and W. Haynes, “Improvements to the LANSCE CCL klystron evaluation”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 783-786. doi:10.18429/JACoW-NAPAC2025-WEP052
[n] J. Mondal, A. Roy, and K. C. Mittal, “Optimization of Wall Thickness of Superconducting 700 MHz Bulk Niobium and Niobium Coated OFHC Cavities by Thermal/Structural Analysis”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP18, pp. 278-281.
[n] M. Yoon, R. T. Kouzes, A. B. McDonald, W. H. Moore, and S. Oh, “A Measurement of the Beam Phase at the Princeton University AVF Cyclotron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1218-1221.
[n] S. C. Joshi et al., “Commissioning of Vertical Test Stand Facility for 2 K Testing of Superconducting Cavities at RRCAT”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP117, pp. 695-698.
[n] A. Schmidt, R. Bandelmann, H. Brueck, A. Matheisen, and J. Schaffran, “Studies on Transportation of Superconducting Resonators and Beam Position Monitors - Quadrupol Units for the XFEL Project”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO050, pp. 504-507.
[n] K. Escherich et al., “Electro Polishing at DESY, A Set Up for Multi-cell Resonator Treatment”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT015, pp. XX-XX.
[n] G. Neu et al., “ASDEX Upgrade Control Parameter Organisation and Configuration Management”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP527, pp. XX-XX.
[n] W. Treutterer et al., “Software Structure and Real-Time Signal Exchange for the ASDEX Upgrade Tokamak Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH111, pp. XX-XX.
[n] J. Yang, B. Qin, Y. Xiong, D. Li, K. Liu, T. Hu, L. Cao and T. Yu, “Hybrid Simulation In Virtual Prototyping Of Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 334-336.
[n] J. Sebek et al., “Diagnostic Instrumentation for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1243-1246.
[n] C. Steier, G. Portmann, D. Robin, J. Safranek, and A. Wolski, “Coupling Correction and Beam Dynamics at Ultralow Vertical Emittance in the ALS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG018, pp. 3213-3215.
[n] A. Jain, A. R. Chindarkar, and K. C. Mittal, “Design and Operating Experience of Triode Electron Guns for Industrial Electron Accelerators”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA011, pp. 348-350.
[n] A. R. Tillu, S. Chandan, K. P. Dixit, K. C. Mittal, and H. E. Sarukte, “Design, Development and Initial Results of Solid State Magnetron Modulator”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP004, pp. 843-846.
[n] S. Hunt, “Purchasing Accelerator Subsystems as Turnkey Components”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUCI001, pp. XX-XX.
[n] Y. C. Huang, A. C. Chiang, and Y. Y. Lin, “A High-Gain, Transform-Limited Far-Infrared Free-Electron Laser Amplifier Seeded by a THz Single-Frequency Difference Frequency Generator”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUA102, pp. XX-XX.
[n] R. Yotam et al., “Personnel Protection and Beam Containment Systems for the 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1028-1031.
[n] M. T. Heron et al., “The Diamond Light Source Control System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH113, pp. 3068-3070.
[n] T. Bahlo, C. Burandt, R. Eichhorn, J. Enders, M. Konrad, and P. N. Nonn, “Design of a Computer Based Resonator-Simulator for Tests of RF Control Systems”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper WEAAC4, pp. 127-129.
[n] M. Boege, B. Keil, T. Schilcher, and V. Schlott, “Commissioning of the Fast Orbit Feedback at SLS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB041, pp. 3386-3388.
[n] M. Sekoranja, S. Hunt, and A. Luedeke, “VisualDCT - Visual EPICS Database Configuration Tool”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP029, pp. XX-XX.
[n] M. Schalwat et al., “Exchange and Repair of Titanium Service Pipes for the EXFEL Series Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB025, pp. 1122-1126.
[n] F. Hug et al., “Increasing the Stability of the Electron Beam of the S-DALINAC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI007, pp. 3303-3305.
[n] G. Ciovati et al., “A Coaxial TE011 Cavity and a System to Measure DC and RF Properties of Superconductors”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP01, pp. XX-XX.
[n] U. Masood et al., “Novel Approach to Utilize Proton Beams from High Power Laser Accelerators for Therapy”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1905-1907. doi:10.18429/JACoW-IPAC2016-TUPOY003
[n] S. S. Gilardoni et al., “The Proposed CERN Proton-Synchrotron Upgrade Program”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS018, pp. 2520-2522.
[n] G. Portmann, C. Steier, and A. Young, “Commissioning of the First Elliptically Polarizing Undulator at the ALS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A04, pp. 2343-2345.
[n] Y. Y. Lin, Y. C. Huang, and A. C. Chiang, “A Proof-of-Principle Experiment for a Structure-Loaded CO2 Laser-Driven Electron Accelerator in Vacuum”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16062, pp. XX-XX.
[n] H. K. Jeong, T. Lee, and M. Yoon, “Measurement of Beta and Dispersion Functions in the PLS Storage ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP092G, pp. 1420-1422.
[n] G. Raupp et al., “Experiment Management System for the ASDEX Upgrade Tokamak”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O3_013.
[n] B. vanderHorst, A. Matheisen, B. Petersen, S. Saegebarth, and P. Schilling, “Update on Cavity Preparation for High Gradient Superconducting Multicell Cavities at DESY”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP30, pp. XX-XX.
[n] N. Krupka et al., “Quality Control at the TTF-Cleanroom Infrastructure for Cavity-Processing”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP18, pp. 322-326.
[n] J. Cary, G. Werner, I. Zilberter, J. Leddy, J. Sembower, and L. Adams, “Adjoint optimization of accelerator cavities”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPS25, unpublished.
[n] T. Bahlo et al., “Phase and Energy Stabilization System at the S-Dalinac”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 638-641. doi:10.18429/JACoW-IBIC2016-WEPG10
[n] A. Burns et al., “The BOSC Project”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 803-806.
[n] L. E. Juergensen et al., “A Low Energy Electron-Scrapersystem for the S-DALINAC Injector”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 366-368. doi:10.18429/JACoW-IPAC2014-MOPRO115
[n] R. Brinkmann and M. Boege, “Beam-based Alignment and Polarization Optimization in the HERA Electron Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 938-941.
[n] Y.-G. Song, Y.-S. Cho, J.-H. Jang, and H.-J. Kwon, “Development of the Control System for PEFP 100-MeV Proton Linear Accelerator”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCB02, pp. 257-259.
[n] J. Valladares, A. Waghmare, J. Castellano, and J. Bradley III, “Transverse electric modes in a resonant cavity and the resultant kick to an 800 MeV proton beam”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB086, unpublished.
[n] P. Dijkstal, M. Arnold, C. Burandt, F. Hug, and N. Pietralla, “Automated Transverse Beam Emittance Measurement using a Slow Wire Scanner at the S-DALINAC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 817-819. doi:10.18429/JACoW-IPAC2015-MOPHA020
[n] L. M. Young and D. R. Keffeler, “The RF Power System for the Chopper/Buncher System on the NBS-Los Alamos RTM”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2165-2168.
[n] O. Holme, D. R. S. Di Calafiori, G. Dissertori, W. Lustermann, and S. Zelepoukine, “Maintaining an Effective and Efficient Control System for the Electromagnetic Calorimeter of the Compact Muon Solenoid Experiment During Long-term CERN Large Hadron Collider Operations”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCB01, pp. 254-256.
[n] K. Schoenberg, “The LANSCE Accelerator: A Powerful Tool for Science and Applications”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOZAC03, pp. 120-120.
[n] F. Hug, M. Arnold, T. Bahlo, J. Pforr, and N. Pietralla, “Beam Based Alignment of SRF Cavities in an Electron Injector Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4219-4222. doi:10.18429/JACoW-IPAC2018-THPMF064
[n] T. Lee and M. Yoon, “Measurement and Control of Linear Coupling in the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP093G, pp. 1423-1425.
[n] J. A. Gore et al., “A FPGA Based High Speed Data Acquisition Card”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCC02, pp. 271-273.
[n] D. Soriano Guill?â, R. Seviour, and S. Hunt, “RF Cavity Design for a Low Cost 1 MeV Proton Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4355-4357. doi:10.18429/JACoW-IPAC2017-THPIK110
[n] K. P. Dixit et al., “Design and Development of Pulsed Modulators for RF Electron Linacs”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP004, pp. 55-57.
[n] T. Ebeling et al., “Processing of TTF Cavities at DESY”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP07, pp. 293-296.
[n] T. Bahlo, C. Burandt, F. Hug, and N. Pietralla, “Implementation of a High Level Phase Controller for the Superconducting Injector of the S-DALINAC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 814-816. doi:10.18429/JACoW-IPAC2015-MOPHA019
[n] P. Roychowdhury, D. P. Chakravarthy, P. Jain, K. C. Mittal, and A. K. Ray, “Design and Development of Beam Transport Elements for the BARC-ECIL Linac”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA076, pp. 220-222.
[n] L. Abadie et al., “SDD toolkit : ITER CODAC Platform for Configuration and Development”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC003, pp. 550-553.
[n] L. C. Teng, “Heavy Ion Accelerators for Inertial Fusion”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3110-3115.
[n] A. Sharma et al., “Multi Gigawatt High Current Pulsed Electron Accelerator Technology Development Program at BARC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP007, pp. 456-458.
[n] R. Chandra, S. R. Ghodke, A. S. Patel, A. Sharma, and S. K. Singh, “Design of Relativistic Magnetron for High Power Microwave Generation”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP006, pp. 452-455.
[n] A. Roy, J. Mondal, and K. C. Mittal, “Structural Analysis of Single Cell Superconducting Elliptical Cavity with Static Lorentz Force”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP17, pp. 275-277.
[n] H. P. Chang, C. C. Kuo, and J. Safranek, “Correction of Lattice Optics in the Presence of Strong Wiggler Magnet at SRRC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D004, pp. 674-676.
[n] F. Zhu et al., “Measurements on Particle Contamination During Cavity Assembly”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP52, pp. 466-469.
[n] M. T. Lynch, D. R. Keffeler, and L. N. Sorum, “RF Control System for a Rocket-Borne Accelerator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 775-778.
[n] K. V. Nagesh, “Theoretical Analysis of the Recovery Times in Low Pressure Sparkgaps - Positive Ion Diffusion Method”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA065, pp. 723-725.
[n] A. Gokhale, B. P. Dubey, and A. S. Sharma, “Artificial Neural Network Calculates Backward Wave Oscillator Parameters Reliably For Pulsed Accelerators”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA073, pp. 738-739.
[n] N. Steinhau-K??hl et al., “Electro Polishing at DESY”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP46, pp. 442-446.
[n] A. Sharma et al., “Development of a Prototype Linear Induction Accelerator at BARC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99917, pp. XX-XX.
[n] Z. Chen, N. K. Bultman, and C. Gautier, “Spallation Neutron Source LINAC Vacuum Seal Design and Testing”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH046, pp. 2192-2194.
[n] H. P. Chang, J. Chen, K. T. Hsu, C. C. Kuo, and Ch. Wang, “Modelling Modulation and Dynamic Tuning of Insertion Devices at SRRC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP116G, pp. 694-696.
[n] G. Joshi, T. Ananthkrishnan, S. K. Bharade, P. M. Paresh, C. K. Pithawa, and C. I. Sujo, “RF Control System for 400 keV RFQ”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCB03, pp. 260-262.
[n] H. Morales Zimmermann, K. Escherich, L. Lilje, A. Matheisen, B. Petersen, and N. Steinhau-K??hl, “Process Control and Web Based Software Set-up for the DESY Electropolishing Infrastructure”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP54, pp. 473-475.
[n] H. K. Kuhn and J. D. Pahud, “The Control Systems for the CERN Super Proton Synchrotron Ring Power Supplies”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3102-3105.
[n] R. Cole and W. H. Atkins, “Real-Time Data Archiving for GTA”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-28, pp. 118-120.
[n] G. Burt et al., “ERL Related HOM Measurements at ELBE”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 31, pp. 129-132.
[n] V. T. Nimje, D. Bhattacharjee, K. Dixit, D. Jayaprakash, K. C. Mittal, and A. K. Ray, “Design and Development of 30 MeV, 3 kW RF Electron LINAC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA122, pp. 491-493.
[n] S. Singh, J. A. Gore, S. Kulkarni, and P. Singh, “Control System for BARC-TIFR Pelletron”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCA04, pp. 251-253.
[n] K. Nakajima et al., “Proof of Principle Experiments of Laser Wakefield Acceleration”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-42, pp. 798-800.
[n] G. Portmann and D. Robin, “Beam Based Alignment Of C-Shaped Quadrupole Magnets”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP45C, pp. 620-622.
[n] P. Dhara, P. Maity, A. Roy, P. S. Roy, and P. Singhai, “Design of the Data Acquisition System for the Nuclear Physics Experiments at VECC”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCC01, pp. 268-270.
[n] A. Roy, A. S. Dhavle, J. Mondal, and K. C. Mittal, “RF Design of a Single Cell Superconducting Elliptical Cavity with Input Coupler”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP16, pp. 272-274.
[n] A. S. Chachondia et al., “PLC-based Control System for 10 MeV Linear Accelerator at EBC Kharghar, BARC”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THCA05, pp. 100-102.
[n] R. Dash, K. C. Mittal, J. Mondal, and A. S. Sharma, “Beam Dynamics Studies of a 30 MeV Standing Wave Electron Linac”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPAC02, pp. 451-453.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Waghmare and D. Rai, “Predicting LANSCE klystron health and performance”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB080, unpublished.
- K. Eppley, J. Feinstein, K. Ko, N. Kroll, T. Lee, and E. Nelson, “A High Power Cross-Field Amplifier at X-Band”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 719-722.
- J. A. Ferreira Somoza and P. Chiggiato, “CERN Vacuum System Activities during the Long Shutdown 1: The LHC's injector chain.”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2291-2293.
- J. Mondal, G. Ciovati, P. Kneisel, K. C. Mittal, and R. Myneni, “Characterization of Ingot Material for SRF Cavity Production”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THOAAU01, pp. 455-461.
- A. Waghmare, C. Richman, and W. Haynes, “Improvements to the LANSCE CCL klystron evaluation”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 783-786.
- J. Mondal, A. Roy, and K. C. Mittal, “Optimization of Wall Thickness of Superconducting 700 MHz Bulk Niobium and Niobium Coated OFHC Cavities by Thermal/Structural Analysis”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP18, pp. 278-281.
- M. Yoon, R. T. Kouzes, A. B. McDonald, W. H. Moore, and S. Oh, “A Measurement of the Beam Phase at the Princeton University AVF Cyclotron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1218-1221.
- S. C. Joshi et al., “Commissioning of Vertical Test Stand Facility for 2 K Testing of Superconducting Cavities at RRCAT”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP117, pp. 695-698.
- A. Schmidt, R. Bandelmann, H. Brueck, A. Matheisen, and J. Schaffran, “Studies on Transportation of Superconducting Resonators and Beam Position Monitors - Quadrupol Units for the XFEL Project”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO050, pp. 504-507.
- K. Escherich et al., “Electro Polishing at DESY, A Set Up for Multi-cell Resonator Treatment”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT015, pp. XX-XX.
- G. Neu et al., “ASDEX Upgrade Control Parameter Organisation and Configuration Management”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP527, pp. XX-XX.
- W. Treutterer et al., “Software Structure and Real-Time Signal Exchange for the ASDEX Upgrade Tokamak Control System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TH111, pp. XX-XX.
- J. Yang, B. Qin, Y. Xiong, D. Li, K. Liu, T. Hu, L. Cao and T. Yu, “Hybrid Simulation In Virtual Prototyping Of Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 334-336.
- J. Sebek et al., “Diagnostic Instrumentation for the SSRL 3 GeV Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1243-1246.
- C. Steier, G. Portmann, D. Robin, J. Safranek, and A. Wolski, “Coupling Correction and Beam Dynamics at Ultralow Vertical Emittance in the ALS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG018, pp. 3213-3215.
- A. Jain, A. R. Chindarkar, and K. C. Mittal, “Design and Operating Experience of Triode Electron Guns for Industrial Electron Accelerators”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA011, pp. 348-350.
- A. R. Tillu, S. Chandan, K. P. Dixit, K. C. Mittal, and H. E. Sarukte, “Design, Development and Initial Results of Solid State Magnetron Modulator”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP004, pp. 843-846.
- S. Hunt, “Purchasing Accelerator Subsystems as Turnkey Components”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUCI001, pp. XX-XX.
- Y. C. Huang, A. C. Chiang, and Y. Y. Lin, “A High-Gain, Transform-Limited Far-Infrared Free-Electron Laser Amplifier Seeded by a THz Single-Frequency Difference Frequency Generator”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUA102, pp. XX-XX.
- R. Yotam et al., “Personnel Protection and Beam Containment Systems for the 3 GeV Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1028-1031.
- M. T. Heron et al., “The Diamond Light Source Control System”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH113, pp. 3068-3070.
- T. Bahlo, C. Burandt, R. Eichhorn, J. Enders, M. Konrad, and P. N. Nonn, “Design of a Computer Based Resonator-Simulator for Tests of RF Control Systems”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper WEAAC4, pp. 127-129.
- M. Boege, B. Keil, T. Schilcher, and V. Schlott, “Commissioning of the Fast Orbit Feedback at SLS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB041, pp. 3386-3388.
- M. Sekoranja, S. Hunt, and A. Luedeke, “VisualDCT - Visual EPICS Database Configuration Tool”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP029, pp. XX-XX.
- M. Schalwat et al., “Exchange and Repair of Titanium Service Pipes for the EXFEL Series Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB025, pp. 1122-1126.
- F. Hug et al., “Increasing the Stability of the Electron Beam of the S-DALINAC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI007, pp. 3303-3305.
- G. Ciovati et al., “A Coaxial TE011 Cavity and a System to Measure DC and RF Properties of Superconductors”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP01, pp. XX-XX.
- U. Masood et al., “Novel Approach to Utilize Proton Beams from High Power Laser Accelerators for Therapy”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1905-1907.
- S. S. Gilardoni et al., “The Proposed CERN Proton-Synchrotron Upgrade Program”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS018, pp. 2520-2522.
- G. Portmann, C. Steier, and A. Young, “Commissioning of the First Elliptically Polarizing Undulator at the ALS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2A04, pp. 2343-2345.
- Y. Y. Lin, Y. C. Huang, and A. C. Chiang, “A Proof-of-Principle Experiment for a Structure-Loaded CO2 Laser-Driven Electron Accelerator in Vacuum”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16062, pp. XX-XX.
- H. K. Jeong, T. Lee, and M. Yoon, “Measurement of Beta and Dispersion Functions in the PLS Storage ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP092G, pp. 1420-1422.
- G. Raupp et al., “Experiment Management System for the ASDEX Upgrade Tokamak”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O3_013.
- B. vanderHorst, A. Matheisen, B. Petersen, S. Saegebarth, and P. Schilling, “Update on Cavity Preparation for High Gradient Superconducting Multicell Cavities at DESY”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP30, pp. XX-XX.
- N. Krupka et al., “Quality Control at the TTF-Cleanroom Infrastructure for Cavity-Processing”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP18, pp. 322-326.
- J. Cary, G. Werner, I. Zilberter, J. Leddy, J. Sembower, and L. Adams, “Adjoint optimization of accelerator cavities”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS25, unpublished.
- T. Bahlo et al., “Phase and Energy Stabilization System at the S-Dalinac”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 638-641.
- A. Burns et al., “The BOSC Project”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 803-806.
- L. E. Juergensen et al., “A Low Energy Electron-Scrapersystem for the S-DALINAC Injector”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 366-368.
- R. Brinkmann and M. Boege, “Beam-based Alignment and Polarization Optimization in the HERA Electron Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 938-941.
- Y.-G. Song, Y.-S. Cho, J.-H. Jang, and H.-J. Kwon, “Development of the Control System for PEFP 100-MeV Proton Linear Accelerator”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCB02, pp. 257-259.
- J. Valladares, A. Waghmare, J. Castellano, and J. Bradley III, “Transverse electric modes in a resonant cavity and the resultant kick to an 800 MeV proton beam”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper MOPB086, unpublished.
- P. Dijkstal, M. Arnold, C. Burandt, F. Hug, and N. Pietralla, “Automated Transverse Beam Emittance Measurement using a Slow Wire Scanner at the S-DALINAC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 817-819.
- L. M. Young and D. R. Keffeler, “The RF Power System for the Chopper/Buncher System on the NBS-Los Alamos RTM”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2165-2168.
- O. Holme, D. R. S. Di Calafiori, G. Dissertori, W. Lustermann, and S. Zelepoukine, “Maintaining an Effective and Efficient Control System for the Electromagnetic Calorimeter of the Compact Muon Solenoid Experiment During Long-term CERN Large Hadron Collider Operations”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCB01, pp. 254-256.
- K. Schoenberg, “The LANSCE Accelerator: A Powerful Tool for Science and Applications”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOZAC03, pp. 120-120.
- F. Hug, M. Arnold, T. Bahlo, J. Pforr, and N. Pietralla, “Beam Based Alignment of SRF Cavities in an Electron Injector Linac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4219-4222.
- T. Lee and M. Yoon, “Measurement and Control of Linear Coupling in the PLS Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP093G, pp. 1423-1425.
- J. A. Gore et al., “A FPGA Based High Speed Data Acquisition Card”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCC02, pp. 271-273.
- D. Soriano Guill?â, R. Seviour, and S. Hunt, “RF Cavity Design for a Low Cost 1 MeV Proton Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4355-4357.
- K. P. Dixit et al., “Design and Development of Pulsed Modulators for RF Electron Linacs”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP004, pp. 55-57.
- T. Ebeling et al., “Processing of TTF Cavities at DESY”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP07, pp. 293-296.
- T. Bahlo, C. Burandt, F. Hug, and N. Pietralla, “Implementation of a High Level Phase Controller for the Superconducting Injector of the S-DALINAC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 814-816.
- P. Roychowdhury, D. P. Chakravarthy, P. Jain, K. C. Mittal, and A. K. Ray, “Design and Development of Beam Transport Elements for the BARC-ECIL Linac”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA076, pp. 220-222.
- L. Abadie et al., “SDD toolkit : ITER CODAC Platform for Configuration and Development”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC003, pp. 550-553.
- L. C. Teng, “Heavy Ion Accelerators for Inertial Fusion”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3110-3115.
- A. Sharma et al., “Multi Gigawatt High Current Pulsed Electron Accelerator Technology Development Program at BARC”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP007, pp. 456-458.
- R. Chandra, S. R. Ghodke, A. S. Patel, A. Sharma, and S. K. Singh, “Design of Relativistic Magnetron for High Power Microwave Generation”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP006, pp. 452-455.
- A. Roy, J. Mondal, and K. C. Mittal, “Structural Analysis of Single Cell Superconducting Elliptical Cavity with Static Lorentz Force”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP17, pp. 275-277.
- H. P. Chang, C. C. Kuo, and J. Safranek, “Correction of Lattice Optics in the Presence of Strong Wiggler Magnet at SRRC”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D004, pp. 674-676.
- F. Zhu et al., “Measurements on Particle Contamination During Cavity Assembly”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP52, pp. 466-469.
- M. T. Lynch, D. R. Keffeler, and L. N. Sorum, “RF Control System for a Rocket-Borne Accelerator”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 775-778.
- K. V. Nagesh, “Theoretical Analysis of the Recovery Times in Low Pressure Sparkgaps - Positive Ion Diffusion Method”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA065, pp. 723-725.
- A. Gokhale, B. P. Dubey, and A. S. Sharma, “Artificial Neural Network Calculates Backward Wave Oscillator Parameters Reliably For Pulsed Accelerators”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA073, pp. 738-739.
- N. Steinhau-K??hl et al., “Electro Polishing at DESY”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP46, pp. 442-446.
- A. Sharma et al., “Development of a Prototype Linear Induction Accelerator at BARC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP99917, pp. XX-XX.
- Z. Chen, N. K. Bultman, and C. Gautier, “Spallation Neutron Source LINAC Vacuum Seal Design and Testing”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH046, pp. 2192-2194.
- H. P. Chang, J. Chen, K. T. Hsu, C. C. Kuo, and Ch. Wang, “Modelling Modulation and Dynamic Tuning of Insertion Devices at SRRC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP116G, pp. 694-696.
- G. Joshi, T. Ananthkrishnan, S. K. Bharade, P. M. Paresh, C. K. Pithawa, and C. I. Sujo, “RF Control System for 400 keV RFQ”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCB03, pp. 260-262.
- H. Morales Zimmermann, K. Escherich, L. Lilje, A. Matheisen, B. Petersen, and N. Steinhau-K??hl, “Process Control and Web Based Software Set-up for the DESY Electropolishing Infrastructure”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP54, pp. 473-475.
- H. K. Kuhn and J. D. Pahud, “The Control Systems for the CERN Super Proton Synchrotron Ring Power Supplies”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3102-3105.
- R. Cole and W. H. Atkins, “Real-Time Data Archiving for GTA”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-28, pp. 118-120.
- G. Burt et al., “ERL Related HOM Measurements at ELBE”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 31, pp. 129-132.
- V. T. Nimje, D. Bhattacharjee, K. Dixit, D. Jayaprakash, K. C. Mittal, and A. K. Ray, “Design and Development of 30 MeV, 3 kW RF Electron LINAC”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA122, pp. 491-493.
- S. Singh, J. A. Gore, S. Kulkarni, and P. Singh, “Control System for BARC-TIFR Pelletron”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCA04, pp. 251-253.
- K. Nakajima et al., “Proof of Principle Experiments of Laser Wakefield Acceleration”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-42, pp. 798-800.
- G. Portmann and D. Robin, “Beam Based Alignment Of C-Shaped Quadrupole Magnets”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP45C, pp. 620-622.
- P. Dhara, P. Maity, A. Roy, P. S. Roy, and P. Singhai, “Design of the Data Acquisition System for the Nuclear Physics Experiments at VECC”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCC01, pp. 268-270.
- A. Roy, A. S. Dhavle, J. Mondal, and K. C. Mittal, “RF Design of a Single Cell Superconducting Elliptical Cavity with Input Coupler”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP16, pp. 272-274.
- A. S. Chachondia et al., “PLC-based Control System for 10 MeV Linear Accelerator at EBC Kharghar, BARC”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THCA05, pp. 100-102.
- R. Dash, K. C. Mittal, J. Mondal, and A. S. Sharma, “Beam Dynamics Studies of a 30 MeV Standing Wave Electron Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPAC02, pp. 451-453.
Back to search