Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Abs, J. M. Capdevila, T. Delvigne, F. Genin, Y. Jongen, and A. Nguyen, “RHODOTRON Accelerators for Industrial Electron-Beam Processing: A Progress Report”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP076G, pp. 2687-2692.
[n] F. Tazzioli et al., “Initial Commissioning of the LISA Superconducting Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-01, pp. 293-295.
[n] R. Bate, D. M. Dykes, and M. Jensen, “The Diamond Light Source RF System”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP29, pp. 101-102.
[n] S. Holm and D. Reistad, “Status Report on the Uppsala Synchrocyclotron and CELSIUS Cooler Ring Project”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-13, pp. 80-83.
[n] M. V. Maltseva and A. A. Maltsev, “Infrared Synchrotron Methods and Systems for Monitoring and Controlling Particle Beams in Real Time”, in Proc. HF'14, Beijing, China, Oct. 2014, paper SAT1B4, pp. 179-183.
[n] C. Biscari et al., “Proposal of an Experiment on Bunch Length Modulation in DAFNE”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAA003, pp. 336-338.
[n] A. A. Maltsev and M. V. Maltseva, “About the Opportunity to Use Solid-State Photo Multipliers for not Destroying Synchrotron Diagnostics of High Energy Proton Beams”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP024, pp. XX-XX.
[n] S. Holm, “Operational Experience of the Reconstructed Uppsala Synchrocyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper A-05, pp. 17-20.
[n] S. Kullander, S. Holm, B. Johansson, and A. Tidriks, “Proposal for a Sector-Focusing Synchro-Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper D-004, pp. XX-XX.
[n] M. Migliorati et al., “The SPARC Project: A High Brightness Electron Beam Source at LNF to Drive a SASE-FEL Experiment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB002, pp. 3285-3287.
[n] J. Leibfritz et al., “Fermilab Electron Cooling Project: Engineering Aspects of Cooling Section”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH088, pp. 1414-1416.
[n] S. Kullander and S. Lindb?ñck, “Some Studies on Regenerative Beam Extraction in Synchrocyclotrons”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper B-009, pp. XX-XX.
[n] J. Kim et al., “Remote RF Synchronization With Femtosecond Drift at PAL”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO33, pp. 570-573.
[n] O. A. Tarvainen, H. A. Koivisto, T. Ropponen, V. A. Toivanen, Y. Higurashi, and T. Nakagawa, “Time Evolution of Plasma Potential in Pulsed Operation of ECRIS”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUCOBK03, pp. 93-95.
[n] E. Soliman, K. Hofmann, H. Reeg, and M. Schwickert, “Sensor Studies for DC Current Transformer Application”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF31, pp. 624-628.
[n] R. Boni, A. Gallo, F. Marcellini, and G. Vignola, “Operational Experience with the DA NE Radio-Frequency Systems”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP84, pp. 866-868.
[n] A. Chincarini, R. Ballantini, G. Gemme, and R. Parodi, “Pipe Cooling of Superconducting Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP27, pp. 362-367.
[n] R. Ballantini, A. Chincarini, G. Gemme, R. Parodi, and A. Podesta, “RF Superconductivity at INFN-Genoa”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper TL013, pp. XX-XX.
[n] L. Sito et al., “Impedance and thermal studies of the CERN SPS wire scanners and mitigation of wire heating”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2260-2263. doi:10.18429/JACoW-IPAC2024-WEPG29
[n] W. Chou et al., “The Design of a $gamma_t$-Jump System for the FNAL Main Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W015, pp. 994-996.
[n] D. Giove et al., “Study and Design of Room Temperature Cavities for an RF Compressor Prototype”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB019, pp. 2080-2082.
[n] J. K. Park, Y.-S. Cho, H.-J. Kwon, K. T. Seol, and S. P. Yun, “Diffusion and Thermal Stability of Implanted Hydrogen in ZnO Nanorods”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1982-1984. doi:10.18429/JACoW-IPAC2016-TUPOY036
[n] F. Kramer, J. Knobloch, O. Kugeler, and J. M. K?Âszegi, “Mapping Flux Trapping in SRF Cavities to Analyze the Impact of Geometry”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 364-369. doi:10.18429/JACoW-SRF2019-TUFUB3
[n] R. N. Heese, “Status of the National Synchrotron Light Source Project”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3163-3166.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Abs, J. M. Capdevila, T. Delvigne, F. Genin, Y. Jongen, and A. Nguyen, “RHODOTRON Accelerators for Industrial Electron-Beam Processing: A Progress Report”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP076G, pp. 2687-2692.
- F. Tazzioli et al., “Initial Commissioning of the LISA Superconducting Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-01, pp. 293-295.
- R. Bate, D. M. Dykes, and M. Jensen, “The Diamond Light Source RF System”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP29, pp. 101-102.
- S. Holm and D. Reistad, “Status Report on the Uppsala Synchrocyclotron and CELSIUS Cooler Ring Project”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper B-13, pp. 80-83.
- M. V. Maltseva and A. A. Maltsev, “Infrared Synchrotron Methods and Systems for Monitoring and Controlling Particle Beams in Real Time”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper SAT1B4, pp. 179-183.
- C. Biscari et al., “Proposal of an Experiment on Bunch Length Modulation in DAFNE”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAA003, pp. 336-338.
- A. A. Maltsev and M. V. Maltseva, “About the Opportunity to Use Solid-State Photo Multipliers for not Destroying Synchrotron Diagnostics of High Energy Proton Beams”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP024, pp. XX-XX.
- S. Holm, “Operational Experience of the Reconstructed Uppsala Synchrocyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper A-05, pp. 17-20.
- S. Kullander, S. Holm, B. Johansson, and A. Tidriks, “Proposal for a Sector-Focusing Synchro-Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper D-004, pp. XX-XX.
- M. Migliorati et al., “The SPARC Project: A High Brightness Electron Beam Source at LNF to Drive a SASE-FEL Experiment”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB002, pp. 3285-3287.
- J. Leibfritz et al., “Fermilab Electron Cooling Project: Engineering Aspects of Cooling Section”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH088, pp. 1414-1416.
- S. Kullander and S. Lindb?ñck, “Some Studies on Regenerative Beam Extraction in Synchrocyclotrons”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper B-009, pp. XX-XX.
- J. Kim et al., “Remote RF Synchronization With Femtosecond Drift at PAL”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO33, pp. 570-573.
- O. A. Tarvainen, H. A. Koivisto, T. Ropponen, V. A. Toivanen, Y. Higurashi, and T. Nakagawa, “Time Evolution of Plasma Potential in Pulsed Operation of ECRIS”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper TUCOBK03, pp. 93-95.
- E. Soliman, K. Hofmann, H. Reeg, and M. Schwickert, “Sensor Studies for DC Current Transformer Application”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF31, pp. 624-628.
- R. Boni, A. Gallo, F. Marcellini, and G. Vignola, “Operational Experience with the DA NE Radio-Frequency Systems”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP84, pp. 866-868.
- A. Chincarini, R. Ballantini, G. Gemme, and R. Parodi, “Pipe Cooling of Superconducting Cavities”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP27, pp. 362-367.
- R. Ballantini, A. Chincarini, G. Gemme, R. Parodi, and A. Podesta, “RF Superconductivity at INFN-Genoa”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper TL013, pp. XX-XX.
- L. Sito et al., “Impedance and thermal studies of the CERN SPS wire scanners and mitigation of wire heating”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG29, pp. 2260-2263.
- W. Chou et al., “The Design of a $gamma_t$-Jump System for the FNAL Main Injector”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W015, pp. 994-996.
- D. Giove et al., “Study and Design of Room Temperature Cavities for an RF Compressor Prototype”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB019, pp. 2080-2082.
- J. K. Park, Y.-S. Cho, H.-J. Kwon, K. T. Seol, and S. P. Yun, “Diffusion and Thermal Stability of Implanted Hydrogen in ZnO Nanorods”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1982-1984.
- F. Kramer, J. Knobloch, O. Kugeler, and J. M. K?Âszegi, “Mapping Flux Trapping in SRF Cavities to Analyze the Impact of Geometry”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 364-369.
- R. N. Heese, “Status of the National Synchrotron Light Source Project”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3163-3166.
Back to search