Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers have malformed authors, please correct this before using these references.
Favourites
For Word
[n] J. Klingmann et al., “Fabrication of DDS-3, an 11.4 GHz Damped-Detuned Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP51, pp. 777-779.
[n] H. Burkhardt, K. Cornelis, I. Reichel, H. Schmickler, and G. von Holtey, “Beam Tails in LEP”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP022L, pp. 1152-1154.
[n] G. Morgan et al., “Superconducting Magnet System for the AGS High Energy Unseparated Beam”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1164-1168.
[n] Y. Shiroyanagi et al., “15+ T HTS Solenoid for Muon Accelerator Program”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD048, pp. 3617-3619.
[n] J. Strait et al., “Tests of Prototype SSC Magnets”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1540-1543.
[n] Y. Shiroyanagi, G. A. Greene, R. C. Gupta, and W. Sampson, “Influence of Proton Irradiation on Angular Dependence of Second Generation (2G) HTS”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP171, pp. 1145-1147.
[n] T. Lavine, “Review of Pulsed RF Power Generation”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 302-307.
[n] M. Tigner and P. Dahl, “The SSC Status Outlook”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 2003-2008.
[n] H. M. Hocker et al., “Design, Construction and Test of Cryogen-Free HTS Coil Structure”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP165, pp. 1133-1135.
[n] A. M. Hutton et al., “Status of the SLC Damping Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1659-1662.
[n] R. Bailey, G. Geschonke, E. Keil, M. Lamont, and G. von Holtey, “Studies of Bunch Trains in LEP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 445-448.
[n] R. C. Gupta et al., “Design Construction and Test Results of a HTS Solenoid for Energy Recovery Linac”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP163, pp. 1127-1129.
[n] M. Garber, R. L. Sabatini, W. B. Sampson, and M. Suenaga, “Effect of Cu4Ti Compound Formation on the Characteristics of NbTi Accelerator Magnet Wire”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3681-3684.
[n] H. Burkhardt, J. Miles, J. Rothberg, and G. von Holtey, “Experience with Particle Backgrounds at LEP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 451-454.
[n] A. D. McInturff et al., “The Design, Construction, and Operation Update of the ISABELLER Ring Magnets”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3899-3903.
[n] A. Ueda et al., “Design and Fabrication of the Compact-Erl Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1111-1114. doi:10.18429/JACoW-IPAC2016-TUPMB005
[n] W. Herr, R. Lauckner, and G. Morpurgo, “The RTC - A Software Support System for the Control of the CERN SPS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1678-1681.
[n] G. P. Ferri, M. Glaser, F. Lemeilleur, and G. von Holtey, “Commissioning and Operating Experience with the Interaction Rate and Background Monitors of the LEP ee- Collider”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 797-800.
[n] E. Bleser et al., “Magnetic Field Measurements on ISABELLE Storage Ring Magnets”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3903-3907.
[n] K. Fant et al., “The Next Linear Collider Test Accelerator's RF Pulse Compression and Transmission Systems”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP089L, pp. 2062-2064.
[n] R. C. Gupta et al., “HTS/lTS Hybrid High Field Superconducting Magnet Designs for the Proposed 100 TeV Proton Colliders”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3609-3611. doi:10.18429/JACoW-IPAC2015-WEPWI053
[n] X. J. Wang, I. Ben-Zvi, J. Sheehan, and V. Yakimenko, “Brookhaven Accelerator Test Facility Energy Upgrade”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA50, pp. 3495-3497.
[n] G. von Holtey, W. Niessen, and P. Roudeau, “Synchrotron Radiation Masks for LEP2”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 454-457.
[n] T. Lavine, R. Miller, P. Morton, and R. Ruth, “Transient Analysis of Multicavity Klystrons”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-25, pp. 589-591.
[n] T. Miyajima et al., “Low Emittance Electron Beam Transportation in Compact ERL Injector”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3104-3106. doi:10.18429/JACoW-IPAC2014-THPRO093
[n] S. Sato et al., “Study of J-PARC Linac Beam Position Monitor as Phase Monitor”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP061, pp. 3591-3593.
[n] J. Strait et al., “Full Length SSC R&D Dipole Magnet Test Results”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 530-533.
[n] M. L. Mallory, P. Brindza, H. Laumer, and D. Poe, “Operating Experience with the Cryogenic Systems for a Superconducting Cyclotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3263-3266.
[n] K. W. Shepard, “Development of Superconducting Resonators for the Argonne Heavy-Ion Linac”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3248-3251.
[n] The Bevatron Vacuum Improvement Team, “Improving the Bevatron Vacuum to 10-10 Torr”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3260-3263.
[n] P. Wanderer et al., “Study of Factors Which Affect Training in Isabelle R&D Magnets”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3208-3211.
[n] F. Marti and M. M. Gordon, “Calculation of Forces on the Aluminum Heat Shield Produced by Eddy Currents During Discharge of a Superconducting Cyclotron Magnet”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3254-3257.
[n] G. von Holtey, “Electron Beam Collimation at LEP Energies”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1252-1255.
[n] R. C. Fernow, “ICOOL: A Simulation Code for Ionization Cooling of Muon Beams”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP31, pp. 3020-3022. doi:10.1109/PAC.1999.792132
[n] K. Ko et al., “Design Parameters for the Damped Detuned Accelerating Structure”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA04, pp. 1058-1060.
[n] R. C. Gupta et al., “RHIC Insertion Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2239-2242.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Klingmann et al., “Fabrication of DDS-3, an 11.4 GHz Damped-Detuned Structure”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP51, pp. 777-779.
- H. Burkhardt, K. Cornelis, I. Reichel, H. Schmickler, and G. von Holtey, “Beam Tails in LEP”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP022L, pp. 1152-1154.
- G. Morgan et al., “Superconducting Magnet System for the AGS High Energy Unseparated Beam”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1164-1168.
- Y. Shiroyanagi et al., “15+ T HTS Solenoid for Muon Accelerator Program”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD048, pp. 3617-3619.
- J. Strait et al., “Tests of Prototype SSC Magnets”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1540-1543.
- Y. Shiroyanagi, G. A. Greene, R. C. Gupta, and W. Sampson, “Influence of Proton Irradiation on Angular Dependence of Second Generation (2G) HTS”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP171, pp. 1145-1147.
- T. Lavine, “Review of Pulsed RF Power Generation”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 302-307.
- M. Tigner and P. Dahl, “The SSC Status Outlook”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 2003-2008.
- H. M. Hocker et al., “Design, Construction and Test of Cryogen-Free HTS Coil Structure”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP165, pp. 1133-1135.
- A. M. Hutton et al., “Status of the SLC Damping Rings”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1659-1662.
- R. Bailey, G. Geschonke, E. Keil, M. Lamont, and G. von Holtey, “Studies of Bunch Trains in LEP”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 445-448.
- R. C. Gupta et al., “Design Construction and Test Results of a HTS Solenoid for Energy Recovery Linac”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP163, pp. 1127-1129.
- M. Garber, R. L. Sabatini, W. B. Sampson, and M. Suenaga, “Effect of Cu4Ti Compound Formation on the Characteristics of NbTi Accelerator Magnet Wire”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3681-3684.
- H. Burkhardt, J. Miles, J. Rothberg, and G. von Holtey, “Experience with Particle Backgrounds at LEP”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 451-454.
- A. D. McInturff et al., “The Design, Construction, and Operation Update of the ISABELLER Ring Magnets”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3899-3903.
- A. Ueda et al., “Design and Fabrication of the Compact-Erl Magnets”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1111-1114.
- W. Herr, R. Lauckner, and G. Morpurgo, “The RTC - A Software Support System for the Control of the CERN SPS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1678-1681.
- G. P. Ferri, M. Glaser, F. Lemeilleur, and G. von Holtey, “Commissioning and Operating Experience with the Interaction Rate and Background Monitors of the LEP ee- Collider”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 797-800.
- E. Bleser et al., “Magnetic Field Measurements on ISABELLE Storage Ring Magnets”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3903-3907.
- K. Fant et al., “The Next Linear Collider Test Accelerator's RF Pulse Compression and Transmission Systems”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP089L, pp. 2062-2064.
- R. C. Gupta et al., “HTS/lTS Hybrid High Field Superconducting Magnet Designs for the Proposed 100 TeV Proton Colliders”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3609-3611.
- X. J. Wang, I. Ben-Zvi, J. Sheehan, and V. Yakimenko, “Brookhaven Accelerator Test Facility Energy Upgrade”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA50, pp. 3495-3497.
- G. von Holtey, W. Niessen, and P. Roudeau, “Synchrotron Radiation Masks for LEP2”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 454-457.
- T. Lavine, R. Miller, P. Morton, and R. Ruth, “Transient Analysis of Multicavity Klystrons”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-25, pp. 589-591.
- T. Miyajima et al., “Low Emittance Electron Beam Transportation in Compact ERL Injector”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3104-3106.
- S. Sato et al., “Study of J-PARC Linac Beam Position Monitor as Phase Monitor”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP061, pp. 3591-3593.
- J. Strait et al., “Full Length SSC R&D Dipole Magnet Test Results”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 530-533.
- M. L. Mallory, P. Brindza, H. Laumer, and D. Poe, “Operating Experience with the Cryogenic Systems for a Superconducting Cyclotron”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3263-3266.
- K. W. Shepard, “Development of Superconducting Resonators for the Argonne Heavy-Ion Linac”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3248-3251.
- The Bevatron Vacuum Improvement Team, “Improving the Bevatron Vacuum to 10-10 Torr”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3260-3263.
- P. Wanderer et al., “Study of Factors Which Affect Training in Isabelle R&D Magnets”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3208-3211.
- F. Marti and M. M. Gordon, “Calculation of Forces on the Aluminum Heat Shield Produced by Eddy Currents During Discharge of a Superconducting Cyclotron Magnet”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3254-3257.
- G. von Holtey, “Electron Beam Collimation at LEP Energies”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1252-1255.
- R. C. Fernow, “ICOOL: A Simulation Code for Ionization Cooling of Muon Beams”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP31, pp. 3020-3022.
- K. Ko et al., “Design Parameters for the Damped Detuned Accelerating Structure”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA04, pp. 1058-1060.
- R. C. Gupta et al., “RHIC Insertion Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2239-2242.
Back to search