Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Bauer et al., “Synchrotron Radiation Absorbers for Hadron Colliders”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO015, pp. 2541-2543.
[n] R. P. Johnson et al., “Muon Beam Helical Cooling Channel Design”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper MOAM2HA03, pp. 21-25.
[n] J. Sekutowicz et al., “Superstructures: First Cold Test and Future Applications”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUO05, pp. 234-238.
[n] A. Laxdal et al., “Recirculating Electron Beam Photo-converter for Rare Isotope Production”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 383-386. doi:10.18429/JACoW-Cyclotrons2016-THD03
[n] V. S. Kashikhin et al., “Four-Coil Superconducting Helical Solenoid Model for Muon Beam Cooling”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD013, pp. 2431-2433.
[n] S. Ghosh et al., “Progress of Delhi Light Source at IUAC, New Delhi”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 149-152. doi:10.18429/JACoW-FEL2017-MOP046
[n] F. Epaud, “ESRF's New Beam Position System for the Storage Ring using Libera Brilliance Devices”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP004, pp. 682-684.
[n] G. Velev et al., “Fabrication and Production Test Results of Multi-Element Corrector Magnets for the Fermilab Booster Synchrotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP015, pp. 163-165.
[n] M. A. Fedorov et al., “Leveraging Splunk for Control System Monitoring and Management”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 253-257. doi:10.18429/JACoW-ICALEPCS2017-TUCPA02
[n] J. M. Koch, F. Epaud, G. Gautier, E. Plouviez, and F. Uberto, “New Fast Orbit Feedback Architecture Based on Libera Brilliance Devices for the ESRF Storage Ring”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THB004, pp. 653-655.
[n] B. A. Prichard et al., “Technological Improvements in the DARHT II Accelerator Cells”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FOAA002, pp. 169-173.
[n] J. Meyer et al., “Upgrading the ESRF Control System after 10 Years of Operation”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU615, pp. XX-XX.
[n] T. M. Frazier et al., “The National Ignition Facility Data Repository”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUB002, pp. 66-68.
[n] E. Panofski, A. Jankowiak, T. Kamps, and A. Neumann, “Multi-Objective Optimization of an SRF Photoinjector with Booster Section for High Brightness Beam Performance”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3193-3196. doi:10.18429/JACoW-IPAC2018-THPAF087
[n] E. Plouviez, P. Arnoux, F. Epaud, J. M. Koch, G. A. Naylor, and F. Uberto, “Bunch by bunch Transverse Feedback Development at ESRF”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC132, pp. 3297-3299.
[n] J. H. Thie et al., “Commissioning and Upgrade of Automatic Cavity Tuning Machines for the European Xfel”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO048, pp. 495-500.
[n] J. H. Thie et al., “Mechanical Design of Automatic Cavity Tuning Machines”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO074, pp. 797-800.
[n] S. Y. Lee et al., “The RHIC Lattice”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 773-776.
[n] E. Plouviez, F. Epaud, L. Farvacque, and J. M. Koch, “Optimisation of the SVD Treatment in the Fast Orbit Correction of the ESRF Storage Ring”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC13, pp. 694-697.
[n] D. G. Morris et al., “RF System for FRIB Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1765-1770. doi:10.18429/JACoW-IPAC2018-WEXGBF3
[n] E. Plouviez, F. Epaud, J. M. Koch, and K. B. Scheidt, “The New Fast Orbit Correction System of the ESRF Storage Ring”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD74, pp. 215-217.
[n] F. Epaud, J. M. Koch, and E. Plouviez, “Architecture and Control of the Fast Orbit Correction for the ESRF Storage Ring”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS014, pp. 189-191.
[n] R. B. Agustsson et al., “Normal Conducting Radio Frequency X-band Deflecting Cavity Fabrication, Validation and Tuning”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI086, pp. 2899-2901.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Bauer et al., “Synchrotron Radiation Absorbers for Hadron Colliders”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPDO015, pp. 2541-2543.
- R. P. Johnson et al., “Muon Beam Helical Cooling Channel Design”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper MOAM2HA03, pp. 21-25.
- J. Sekutowicz et al., “Superstructures: First Cold Test and Future Applications”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUO05, pp. 234-238.
- A. Laxdal et al., “Recirculating Electron Beam Photo-converter for Rare Isotope Production”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 383-386.
- V. S. Kashikhin et al., “Four-Coil Superconducting Helical Solenoid Model for Muon Beam Cooling”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD013, pp. 2431-2433.
- S. Ghosh et al., “Progress of Delhi Light Source at IUAC, New Delhi”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 149-152.
- F. Epaud, “ESRF's New Beam Position System for the Storage Ring using Libera Brilliance Devices”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP004, pp. 682-684.
- G. Velev et al., “Fabrication and Production Test Results of Multi-Element Corrector Magnets for the Fermilab Booster Synchrotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP015, pp. 163-165.
- M. A. Fedorov et al., “Leveraging Splunk for Control System Monitoring and Management”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 253-257.
- J. M. Koch, F. Epaud, G. Gautier, E. Plouviez, and F. Uberto, “New Fast Orbit Feedback Architecture Based on Libera Brilliance Devices for the ESRF Storage Ring”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THB004, pp. 653-655.
- B. A. Prichard et al., “Technological Improvements in the DARHT II Accelerator Cells”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FOAA002, pp. 169-173.
- J. Meyer et al., “Upgrading the ESRF Control System after 10 Years of Operation”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU615, pp. XX-XX.
- T. M. Frazier et al., “The National Ignition Facility Data Repository”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUB002, pp. 66-68.
- E. Panofski, A. Jankowiak, T. Kamps, and A. Neumann, “Multi-Objective Optimization of an SRF Photoinjector with Booster Section for High Brightness Beam Performance”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3193-3196.
- E. Plouviez, P. Arnoux, F. Epaud, J. M. Koch, G. A. Naylor, and F. Uberto, “Bunch by bunch Transverse Feedback Development at ESRF”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC132, pp. 3297-3299.
- J. H. Thie et al., “Commissioning and Upgrade of Automatic Cavity Tuning Machines for the European Xfel”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO048, pp. 495-500.
- J. H. Thie et al., “Mechanical Design of Automatic Cavity Tuning Machines”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO074, pp. 797-800.
- S. Y. Lee et al., “The RHIC Lattice”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 773-776.
- E. Plouviez, F. Epaud, L. Farvacque, and J. M. Koch, “Optimisation of the SVD Treatment in the Fast Orbit Correction of the ESRF Storage Ring”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC13, pp. 694-697.
- D. G. Morris et al., “RF System for FRIB Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1765-1770.
- E. Plouviez, F. Epaud, J. M. Koch, and K. B. Scheidt, “The New Fast Orbit Correction System of the ESRF Storage Ring”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD74, pp. 215-217.
- F. Epaud, J. M. Koch, and E. Plouviez, “Architecture and Control of the Fast Orbit Correction for the ESRF Storage Ring”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKS014, pp. 189-191.
- R. B. Agustsson et al., “Normal Conducting Radio Frequency X-band Deflecting Cavity Fabrication, Validation and Tuning”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI086, pp. 2899-2901.
Back to search