JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y.-N. Rao, R. A. Baartman, and T. Planche, “Improved Simulation for Centre Region of TRIUMF 500 MeV Cyclotron with Space Charge”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3489-3491. doi:10.18429/JACoW-IPAC2018-THPAK109
[n]	P. Kruyt, D. Gamba, and G. Franchetti, “Measurements and simulations of the e-cooling performance in ELENA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 836-839. doi:10.18429/JACoW-IPAC2024-MOPS51
[n]	M. Kelly et al., “Installation and commissioning of the APS-U bunch lengthening system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2713-2716. doi:10.18429/JACoW-IPAC2024-WEPS10
[n]	D. Schultz et al., “The Polarized Electron Source of the Stanford Linear Accelerator Center”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH2-02, pp. 676-680. 
[n]	G. Hutter and N. Angert, “Improvement of the 108 MHz RF-Amplifiers for the Unilac Alvarez Structure”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3012-3014. 
[n]	R. Hajima, H. Zen, K. Kawase, and H. Ohgaki, “Carrier-envelope phase stabilization in FEL oscillators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1874-1876. doi:10.18429/JACoW-IPAC2023-TUPL054
[n]	K. Yokoyama, S. Fukuda, Y. Higashi, T. Higo, N. K. Kudo, and S. Matsumoto, “High-gradient Experiments with Narrow Waveguides”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP106, pp. 2758-2760. 
[n]	Y. Fukao et al., “Construction Status of the COMET Experimental Facility”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1907-1909. doi:10.18429/JACoW-IPAC2021-TUPAB210
[n]	Ph. Amstutz and M. Vogt, “Microbunching Studies for the FLASH2020+ Upgrade Using a Semi-Lagrangian Vlasov Solver”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2334-2337. doi:10.18429/JACoW-IPAC2022-WEPOMS037
[n]	M. N. Butler, F. Jones, S. Koscielniak, and G. H. Mackenzie, “Coulomb Scattering Cross Sections for Accelerator Design”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 654-657. 
[n]	R. Bugoi, V. Cojocaru, B. Constantinescu, and A. Sasianu, “Materials Analysis in Archaeometrical Studies at Bucharest Particle Accelerators”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP6B14, pp. 2574-2576. 
[n]	R. K. Kutschke, J. Steimel, R. C. Webber, and S. A. Wolbers, “Simultaneous Position Measurements of Protons and Anti-Protons in the Tevatron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT018, pp. 1613-1615. 
[n]	D. T. Ziemianski and M. P. Nowak, “Dynamic Analysis and Measurement of Ground Motion for the Solaris - National Synchrotron Radiation Centre in Cracow”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 24-25. doi:10.18429/JACoW-MEDSI2016-MOPE10
[n]	C. D. Barnes et al., “Determination of Longitudinal Phase Space in SLAC Main Accelerator Beams”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE024, pp. 1856-1858. 
[n]	G. S. Levine and G. W. Bennett, “The Brookhaven AGS Radiation Monitoring Systems”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 734-736. 
[n]	O. Kamigaito et al., “Design of a Charge-State Multiplier System for the RIKEN RI-Beam Factory”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4085, pp. 603-605. 
[n]	R. Johnson, F. Pedersen, G. Shering, and S. van der Meer, “Computer Control of RF-Manipulations in the CERN Antiproton Accumulator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2290-2293. 
[n]	R. Tom?ís, M. Aiba, R. Calaga, A. Morita, G. Vanbavinckhove, and J. Wenninger, “Beta-Beating Corrections in the SPS as a Testbed for the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP022, pp. 2534-2536. 
[n]	D. Neuffer, A. Riddiford, and A. G. Ruggiero, “Searches for Arnold Diffusion" and "Chaotic" Motion in the Beam-Beam Interaction"”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2427-2430. 
[n]	R. Paparella et al., “Operational Experience of the European-XFEL 3.9 GHz Coaxial Tuners”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 240-244. doi:10.18429/JACoW-SRF2017-MOPB077
[n]	M. K. Fujimaki, M. Kase, A. Uchiyama, and M. Komiyama, “Status of Control System for RIKEN RI-Beam Factory”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB11, pp. 187-189. 
[n]	J. Calvey et al., “APS upgrade booster commissioning”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1232-1235. doi:10.18429/JACoW-IPAC2024-TUPG07
[n]	M. Virgo et al., “Controls and Alignment for the University of Maryland Electron Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH169, pp. 1177-1179. 
[n]	T. Yamada, H. Ogawa, Y. Sato, and K. Suzuki, “Status of the NIRS-Chiba Isochronous Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-08, pp. 61-64. 
[n]	B. D. Hartsell, K. Anderson, J. Hylen, V. I. Sidorov, and S. Tariq, “LBNF Hadron Absorber: Mechanical Design and Analysis for 2.4MW Operation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3318-3320. doi:10.18429/JACoW-IPAC2015-WEPTY025
[n]	H. Brueck, B. Holzer, C. Luettge, and B. Pawlowski, “Correction of the Influence of Persistent Currents in the HERA Proton Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP042G, pp. 392-394. 
[n]	D. Li, M. R. Asakawa, and K. Imasaki, “Analysis on the Gain of a Compact Cherenkov Free-Electron Laser”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC70, pp. 398-401. 
[n]	A. Goswami, V. S. Pandit, and P. Sing Babu, “Design Optimization of the Spiral Inflector for a High Current Compact Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP038, pp. 129-131. 
[n]	H. Li, A. K. Bhattacharyya, L. Hermansson, M. Jobs, J. M. Y. Ruber, and R. Santiago Kern, “High Power Testing of the First ESS SPOKE Cavity Package”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 817-820. doi:10.18429/JACoW-SRF2017-THPB035
[n]	Y. Batygin, E. Guardincerri, D. Tupa, and S. Wender, “High-energy beamline for delivering H- laser stripped proton beam to LANSCE experimental area”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2216-2218. doi:10.18429/JACoW-IPAC2023-TUPM012
[n]	S. Choroba, J. Hameister, and M. Kuhn, “Performance of the Klystron Modulators at the S-Band Test Facility at DESY”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4068, pp. 213-215. 
[n]	G. Perez-Segurana et al., “Using ER@CEBAF to Show that a Multipass ERL Can Drive an XFEL”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1555-1558. doi:10.18429/JACoW-IPAC2021-TUPAB079
[n]	P. Nenzi et al., “Stability Analysis of the TOP-IMPLART 35 MeV Proton Beam”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 697-700. doi:10.18429/JACoW-IPAC2018-TUPAF017
[n]	X. Serra-Gallifa et al., “Harmony: A Generic FPGA Based Solution for Flexible Feedback Systems”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 141-144. doi:10.18429/JACoW-PCAPAC2016-FRFMPLCO06
[n]	I. Romera et al., “Design considerations for CERN´s second-generation Beam Interlock System”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4105-4108. doi:10.18429/JACoW-IPAC2023-THPA062
[n]	Y. Ishi, Y. Kuriyama, Y. Mori, M. Sakamoto, and T. Uesugi, “KURRI FFAG's Future Project as ADSR Proton Driver”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 366-370. doi:10.18429/JACoW-Cyclotrons2016-THC01
[n]	P. Ausset, L. Badano, J. Bosser, P. A. Chamouard, P. Knaus, and S. Rossi, “A Betatron Core for Optimised Slow Extraction in a Proton/Ion Medical Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP10H, pp. 2368-2370. 
[n]	S. B. Vorozhtsov, V. P. Dmitrievsky, A. A. Glazov, V. V. Kalinichenko, L. M. Onishchenko, and N. L. Zaplatin, “High-Current Cyclotron Injector”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper D-13, pp. 133-136. 
[n]	Y. Chu et al., “Data Acquisition and Database Management System for Samsung Superconductor Test Facility”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP018, pp. XX-XX. 
[n]	G. Ganetis and A. Prodell, “Results from Heater-Induced Quenches of a 4.5m Two-in-One Superconducting R&D Dipole for the SSC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3678-3681. 
[n]	E. Bargall?â, R. Andersson, S. K?â, A. Nordt, and M. Zaera-Sanz, “Technical and Organisational Complexities with a Distributed MP Strategy at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 670-673. doi:10.18429/JACoW-ICALEPCS2017-TUPHA107
[n]	J. Barranco, W. Bartmann, M. Benedikt, and Y. Papaphilippou, “Beam Losses and Collimation Considerations for PS2”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC052, pp. 3098-3100. 
[n]	T. J. Jones et al., “Development of a Novel Supporting System for High Luminosity LHC SRF Crab Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 304-308. doi:10.18429/JACoW-SRF2017-MOPB104
[n]	G.-T. Park et al., “RF Harmonic Kicker R&D Demonstration and Its Application to the RCS Injection of the EIC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2632-2635. doi:10.18429/JACoW-IPAC2021-WEPAB019
[n]	M. Ferianis, “State of the Art in High-Stability Timing, Phase Reference Distribution and Synchronization Systems”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3GRI02, pp. 1915-1919. 
[n]	P. Sha, J. P. Dai, and F. Jiao, “Research of Nitrogen Doping at IHEP”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2186-2187. doi:10.18429/JACoW-IPAC2016-WEPMB029
[n]	J. L. Conradie et al., “A Radioactive Ion Beam and Isotope Production Facility for iThemba LABS”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 79-83. doi:10.18429/JACoW-RUPAC2016-WEYMH02
[n]	Y. Futami et al., “Secondary Beam Course for the Medical Use at HIMAC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP12C, pp. 2357-2359. 
[n]	R. Broomfield, M. Heiniger, T. Korhonen, and T. Pal, “Database Applications for Control System Hardware Management”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP530, pp. XX-XX. 
[n]	S. Schreiber et al., “Operation of the FLASH Photoinjector Laser System”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPA18, pp. 507-510. 
[n]	H. Y. He, H. Song, J. M. Liu, R. H. Liu, and G. Y. Wang, “Design of Remote Helium Mass Spectrometer Leak Detector”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 123. doi:10.18429/JACoW-MEDSI2020-TUPA02
[n]	M. Cornacchia, R. Lauckner, W. Mills, R. Stiening, E. J. N. Wilson, and G. von Holtey, “Non Linear Fields in the SPS and Their Compensation”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1482-1485. 
[n]	K. S. White, “Status and Future Developments in Large Accelerator Control Systems”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEA2IS01, pp. 239-244. 
[n]	J. M. Byrd et al., “A Dedicated Infrared Synchrotron Radiation Source at the ALS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH074, pp. 2623-2625. 
[n]	R. R. Geraldes et al., “The New High Dynamics DCM for Sirius”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 141-146. doi:10.18429/JACoW-MEDSI2016-TUCA05
[n]	M. Korostelev, I. R. Bailey, A. T. Herrod, A. Wolski, D. Stratakis, and V. Tishchenko, “Update on Bmad Simulations From Target to Storage Ring for the New Muon G-2 Experiment at Fermilab”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 791-794. doi:10.18429/JACoW-IPAC2017-MOPIK110
[n]	A. Takagi, Y. Irie, I. Sugai, and Y. Takeda, “Lifetime Test of Carbon Stripping Foils by 650keV Intense Pulsed H- Ion Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB013, pp. 3909-3911. 
[n]	J. Tueckmantel, “Review of Experience with Superconducting Cavities”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 279-284. 
[n]	H. Hsieh, S. Krinsky, A. Luccio, and A. van Steenbergen, “Design of a 6 Tesla Wiggler for the National Synchrotron Light Source”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3292-3295. 
[n]	J. Peters, “The Status of DESY H- Sources”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP55, pp. 199-201. 
[n]	A. Ropert, “The Status of the ESRF”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 35-40. 
[n]	S. An et al., “Physics Design and Calculation of CYCIAE-70 Extraction System”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP031, pp. 114-116. 
[n]	M. Kelly, “Status of superconducting spoke cavity development”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WE302, pp. XX-XX. 
[n]	H. Sakai, “Overview of CW Input Couplers for ERL”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper FRIOA05, pp. 951-955. 
[n]	C. Pellegrini and J. Wu, “Variable Gap Undulator for 1.5-48 keV Free Electron Laser at LINAC Coherent Light Source”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPA07, pp. 370-373. 
[n]	C.-K. Ng, R. J. England, R. J. Noble, and J. E. Spencer, “Simulation of Power Coupling and Wakefield in Photonic Bandgap Fibers for Dielectric Laser Acceleration”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC31, pp. 135-137. 
[n]	J. Knaster, B. J. Jenninger, D. R. Ramos, G. Ratcliffe, and R. Veness, “The Design of Cold to Warm Transitions of the LHC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF015, pp. 1624-1626. 
[n]	T. Tan, M. A. Wolak, X. Xi, L. Civale, and T. Tajima, “Increase in Vortex Penetration Field on Nb Ellipsoid Coated With a MbB2 Thin Film”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUBA06, pp. 512-515. 
[n]	T. Sugimoto, N. Hosoda, K. Okada, M. Yamaga, M. Ishii, and T. Fukui, “Status of the Control System for Fully Integrated SACLA/SPring-8 Accelerator Complex and New 3 GeV Light Source Being Constructed at Tohoku, Japan”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 905. doi:10.18429/JACoW-ICALEPCS2019-WECPL01
[n]	M. V. Lalayan et al., “Input Couplers for the Dipole Mode Periodic Structures”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC004, pp. 328-330. 
[n]	M. Merio et al., “Furnace N2 Doping Treatments at Fermilab”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB111, pp. 423-427. 
[n]	S. Anderson et al., “Measurements of Transverse Tails in PEP-II”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5B09, pp. 1552-1554. 
[n]	W. Barth et al., “High-Current Proton Beam Investigations at the SILHI-LEBT at CEA/Saclay”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TU3001, pp. 232-236. 
[n]	M. Bocciai, A. Fabris, D. Lachi, C. Pasotti, M. Rinaldi, and M. Svandrlik, “Operational Experience with the ELETTRA RF System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP12C, pp. 1758-1760. 
[n]	A. V. Bubley, V. M. Panasyuk, V. V. Parkhomchuk, and V. B. Reva, “Optimization of the Magnet System for Low Energy Coolers”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THAP04, pp. 167-170. 
[n]	O. N. Borisov, “Beam Extraction of the Heavy Ions from the U-400M Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP020, pp. 90-92. 
[n]	J. J. Petillo, A. J. Dudas, and M. E. Read, “Sheet Electron Beam Gun Design Using ARGUS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 888-891. 
[n]	Z. Igarashi and E. Takasaki, “Velocity Monitor for the KEK 40 MeV Proton Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-26, pp. 112-114. 
[n]	C. W. Schmidt, M. Popovic, and L. Allen, “High Current Proton Tests of the Fermilab LINAC”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUD16, pp. 587-589. 
[n]	H. Mizuno, “RF Pulse Compression for Linear Colliders”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH2001, pp. 737-741. 
[n]	R. Hamm, L. Picardi, and C. Ronsivalle, “Beam Injection Study of the TOP Linac using an AccSys Model PL-7 Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B13, pp. 1675-1677. 
[n]	A. Pettersson, D. P. Brodrick, T. Brys, and M. A. Hartl, “Integration of Sample Environment Systems at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 741-744. doi:10.18429/JACoW-ICALEPCS2017-TUPHA141
[n]	H. Aoyagi et al., “Feasibility Tests of the Beam Halo Monitoring System for Protecting Undulator Permanent Magnets against Radiation Damage at XFEL/SPring-8”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB068, pp. 2851-2853. 
[n]	N. Delerue et al., “Prospects of Additive Manufacturing for Accelerators”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4118-4120. doi:10.18429/JACoW-IPAC2019-THPTS008
[n]	R. O. Hettel, “Beam Steering at the Stanford Synchrotron Radiation Laboratory”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2228-2231. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search