Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. H??bner, “The Challenge of Future Accelerators”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEIAF201, pp. 167-171.
[n] T. Shibata et al., “LEBT Commissioning of the J-PARC LINAC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 251-253. doi:10.18429/JACoW-LINAC2016-MOPLR052
[n] P. A. G?Ârgen, O. Boine-Frankenheim, W. Fischer, and S. M. White, “Simulation of Baseband BTFs Using a Particle-in-cell Code”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper WEAAC2, pp. 121-123.
[n] A. Ageyev et al., “STARTING-UP AND ADJUSTMENT WORKS ON CRYOGENIC AND VACUUM SYSTEM OF THE SUPERCONDUCTING RADIO-FREQUENCY SEPARATOR”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WECAU01, pp. XX-XX.
[n] K. Ohmi, S. Igarashi, Y. Sato, J. Takano, and S. Hatakeyama, “Space Charge Simulation based on a Measured Optics in J-PARC MR”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME012, pp. 1589-1591.
[n] R. Rimmer et al., “An RF Cavity for the B-Factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 819-822.
[n] D. Schulte et al., “CLIC Energy Scans”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE022, pp. 3395-3397.
[n] M. J. Boland et al., “Concept Design for the CLS2 Accelerator Complex”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 354-356. doi:10.18429/JACoW-IPAC2021-MOPAB095
[n] Y. Jiao, D. Ji, and G. Xu, “Latest Design and Optimization of the PEPX-type Lattice for HEPS”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper THPMH1, pp. 110-112.
[n] Y. Nakazawa et al., “High-Power Test of an APF IH-DTL Prototype for the Muon Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 275-278. doi:10.18429/JACoW-LINAC2022-MOPORI22
[n] A. Loulergue, M.-E. Couprie, M. Khojoyan, M. Labat, W. Wang, and C. Evain, “Electron Beam Transfer Line for Demonstration of Laser Plasma Based Free Electron Laser Amplification”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2489-2491. doi:10.18429/JACoW-IPAC2015-WEPWA001
[n] C. B?Âhme, J. L. Conradie, J. Dietrich, V. Kamerdzhiev, and T. Weis, “Gas Scintillation Beam Profile Monitor at COSY J??lich”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM005, pp. 98-100.
[n] P. Gras, W. Funk, L. Gross, D. Vintache, and F. Drouhin, “Front-End Electronics Configuration System for CMS”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEDT005, pp. XX-XX.
[n] A. Chabert, “Status Report on GANIL”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-17, pp. 94-97.
[n] R. Koontz, T. McKinney, R. Miller, and A. Wilmunder, “SLAC Collider Injector, RF Drive Synchronization and Trigger Electronics and 15 Amp Thermionic Gun Development”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2213-2216.
[n] T. Bergmark, K. Hedblom, L. Hermansson, A. Johansson, and D. Reistad, “Transverse Cooling Times and Cooled Beam Profiles at CELSIUS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP096L, pp. 1199-1202.
[n] B. Meirose et al., “MAX IV Operations - Diagnostic Tools and Lessons Learned”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 209-213. doi:10.18429/JACoW-IBIC2019-MOPP045
[n] Y. C. Chen et al., “Optimization and Upgrade of Slow Extraction Control System for HIRFL CSR Main Ring”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1663-1665. doi:10.18429/JACoW-ICALEPCS2017-THPHA122
[n] H. E. Ahn, Y. S. Cho, and B. H. Choi, “Partial Beam Extraction Scheme of Negative Hydrogen Ion”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA76, pp. 1255-1257.
[n] K. Ogura, S. Watanabe, W. Main, J. Weaver, and Y. Carmel, “Cold Test Measurements of a BWO Slow-Wave Structure”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2714-2717.
[n] C. Hessler, O. Geithner, and P. Schuett, “Verification of the optics model of the ESR-CRYRING transfer line at GSI”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2431-2434. doi:10.18429/JACoW-IPAC2023-TUPM095
[n] A. Y. Molodozhentsev, S. Igarashi, Y. Sato, and J. Takano, “Beam Dynamics Study for J-PARC Main Ring by Using the 'Pencil' and Space-charge Dominated Beam: Measurements and Simulations”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB51, pp. 157-161.
[n] J.-L. Boutes and P. Maccioni, “Industrial Production of SC RF Accelerating Cavities at CERCA”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F10, pp. 587-588.
[n] S. M. Polozov, A. M. Fadeev, S. M. Ivanov, and E. A. Perelstein, “Temperature Control System for Thermoradiotherapy Facilities”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 474-476. doi:10.18429/JACoW-RUPAC2016-WEPSB049
[n] E. R. Gray et al., “Longitudinal Beam Motion in the Fermilab Booster Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1897-1900.
[n] N. K. Abrosimov et al., “Gatchina Isochronous Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-10, pp. 58-61.
[n] A. Hanuka et al., “Cumulative Damage of Ultrafast Laser Pulses”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4066-4069. doi:10.18429/JACoW-IPAC2016-THPOW054
[n] M. K. Craddock et al., “TRIUMF KAON Factory Pre-Construction Study”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 450-453.
[n] S. F. Xu, X. Y. He, P. Wang, W. Wang, and Q. Y. Yao, “Analysis of Tidal Effects on Measurement Accuracy of HLS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME027, pp. 2989-2991.
[n] W. W. Terpstra, D. H. Beck, and M. Kreider, “Inexpensive Scheduling in FPGAs”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper TCO301, pp. 147-149.
[n] W. Scandale et al., “Controlling Field Quality in Magnet Production”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAB009, pp. 173-175.
For LaTeX
Use Complete Form
For BibTeX
References
- K. H??bner, “The Challenge of Future Accelerators”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEIAF201, pp. 167-171.
- T. Shibata et al., “LEBT Commissioning of the J-PARC LINAC”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 251-253.
- P. A. G?Ârgen, O. Boine-Frankenheim, W. Fischer, and S. M. White, “Simulation of Baseband BTFs Using a Particle-in-cell Code”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper WEAAC2, pp. 121-123.
- A. Ageyev et al., “STARTING-UP AND ADJUSTMENT WORKS ON CRYOGENIC AND VACUUM SYSTEM OF THE SUPERCONDUCTING RADIO-FREQUENCY SEPARATOR”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WECAU01, pp. XX-XX.
- K. Ohmi, S. Igarashi, Y. Sato, J. Takano, and S. Hatakeyama, “Space Charge Simulation based on a Measured Optics in J-PARC MR”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME012, pp. 1589-1591.
- R. Rimmer et al., “An RF Cavity for the B-Factory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 819-822.
- D. Schulte et al., “CLIC Energy Scans”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE022, pp. 3395-3397.
- M. J. Boland et al., “Concept Design for the CLS2 Accelerator Complex”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 354-356.
- Y. Jiao, D. Ji, and G. Xu, “Latest Design and Optimization of the PEPX-type Lattice for HEPS”, in Proc. 12th Symposium on Accelerator Physics (SAP'14), Lanzhou, China, Aug. 2014, paper THPMH1, pp. 110-112.
- Y. Nakazawa et al., “High-Power Test of an APF IH-DTL Prototype for the Muon Linac”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 275-278.
- A. Loulergue, M.-E. Couprie, M. Khojoyan, M. Labat, W. Wang, and C. Evain, “Electron Beam Transfer Line for Demonstration of Laser Plasma Based Free Electron Laser Amplification”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2489-2491.
- C. B?Âhme, J. L. Conradie, J. Dietrich, V. Kamerdzhiev, and T. Weis, “Gas Scintillation Beam Profile Monitor at COSY J??lich”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM005, pp. 98-100.
- P. Gras, W. Funk, L. Gross, D. Vintache, and F. Drouhin, “Front-End Electronics Configuration System for CMS”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEDT005, pp. XX-XX.
- A. Chabert, “Status Report on GANIL”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper B-17, pp. 94-97.
- R. Koontz, T. McKinney, R. Miller, and A. Wilmunder, “SLAC Collider Injector, RF Drive Synchronization and Trigger Electronics and 15 Amp Thermionic Gun Development”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2213-2216.
- T. Bergmark, K. Hedblom, L. Hermansson, A. Johansson, and D. Reistad, “Transverse Cooling Times and Cooled Beam Profiles at CELSIUS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP096L, pp. 1199-1202.
- B. Meirose et al., “MAX IV Operations - Diagnostic Tools and Lessons Learned”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 209-213.
- Y. C. Chen et al., “Optimization and Upgrade of Slow Extraction Control System for HIRFL CSR Main Ring”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1663-1665.
- H. E. Ahn, Y. S. Cho, and B. H. Choi, “Partial Beam Extraction Scheme of Negative Hydrogen Ion”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA76, pp. 1255-1257.
- K. Ogura, S. Watanabe, W. Main, J. Weaver, and Y. Carmel, “Cold Test Measurements of a BWO Slow-Wave Structure”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2714-2717.
- C. Hessler, O. Geithner, and P. Schuett, “Verification of the optics model of the ESR-CRYRING transfer line at GSI”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM095, pp. 2431-2434.
- A. Y. Molodozhentsev, S. Igarashi, Y. Sato, and J. Takano, “Beam Dynamics Study for J-PARC Main Ring by Using the 'Pencil' and Space-charge Dominated Beam: Measurements and Simulations”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOPAB51, pp. 157-161.
- J.-L. Boutes and P. Maccioni, “Industrial Production of SC RF Accelerating Cavities at CERCA”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F10, pp. 587-588.
- S. M. Polozov, A. M. Fadeev, S. M. Ivanov, and E. A. Perelstein, “Temperature Control System for Thermoradiotherapy Facilities”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 474-476.
- E. R. Gray et al., “Longitudinal Beam Motion in the Fermilab Booster Accelerator”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1897-1900.
- N. K. Abrosimov et al., “Gatchina Isochronous Cyclotron”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper I-10, pp. 58-61.
- A. Hanuka et al., “Cumulative Damage of Ultrafast Laser Pulses”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4066-4069.
- M. K. Craddock et al., “TRIUMF KAON Factory Pre-Construction Study”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 450-453.
- S. F. Xu, X. Y. He, P. Wang, W. Wang, and Q. Y. Yao, “Analysis of Tidal Effects on Measurement Accuracy of HLS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME027, pp. 2989-2991.
- W. W. Terpstra, D. H. Beck, and M. Kreider, “Inexpensive Scheduling in FPGAs”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper TCO301, pp. 147-149.
- W. Scandale et al., “Controlling Field Quality in Magnet Production”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAB009, pp. 173-175.
Back to search