Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Gassot, “Mechanical Stability of the RF Superconducting Cavities”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO039, pp. 2235-2237.
[n] B. M. Campbell, K. C. Dominic Chan, R. C. Gentzlinger, J. P. Kelley, B. Rusnak, and H. Safa, “Engineering Development of Superconducting RF Linac for High-Power Applications”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP14F, pp. 1843-1845.
[n] J. B. Ball et al., “The Holifield Heavy Ion Research Facility - Phase II”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3727-3730.
[n] M. T. Lynch et al., “Linac Design Study for an Intense Neutron-Source Driver”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1683-1686.
[n] R. Ischebeck et al., “Measurement of the Transverse Coherence of the TTF Free Electron Laser”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT044, pp. 2580-2582.
[n] L. Masetti et al., “A Scalable and Homogeneous Web-Based Solution for Presenting CMS Control System Data”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB01, pp. 1040-1043.
[n] M. Solfaroli Camillocci et al., “Commissioning of the LHC Magnet Powering System in 2009”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB045, pp. 376-378.
[n] A. J. Mendez, J. B. Ball, D. Dowling, S. W. Mosko, and B. A. Tatum, “The Oak Ridge Isochronous Cyclotron Refurbishment Project”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP237, pp. 1930-1932.
[n] V. M. Borin, L. M. Schegolev, O. A. Shevchenko, N. A. Vinokurov, V. L. Dorokhov, and O. I. Meshkov, “An Experimental Study of Beam Dynamics in the ERL-Based Novosibirsk Free Electron Laser”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3781-3783. doi:10.18429/JACoW-IPAC2017-THPAB036
[n] E. Bouquerel, M. Dracos, and F. R. Osswald, “Preliminary Design of a 4 MW Proton Beam Switchyard for a Neutrino Super Beam Production Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO004, pp. 1880-1882.
[n] D. Fernandez-Carreiras et al., “Alba, the PLC Based Protection Systems”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEC003, pp. 397-399.
[n] E. Al-Dmour et al., “MAX 4U: an upgrade of the MAX IV 3 GeV ring”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 752-755. doi:10.18429/JACoW-IPAC2025-MOPS061
[n] C. O. Domínguez and F. Zimmermann, “Luminosity Optimization for a Higher-Energy LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ014, pp. 1831-1833.
[n] M. Blaskiewicz and W. T. Weng, “Effect of Space Charge Tune Shift on Transverse Instabilities”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1165-1168.
[n] M. Modena, H. Hsieh, and C. Sanelli, “High Current Density Septa for DAPhiNE Accumulator and Storage Rings”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1472-1475.
[n] V. M. Borin et al., “Measurements of Energy Spread at VEPP-4M”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 469-471. doi:10.18429/JACoW-RUPAC2018-THPSC29
[n] L. Pavlovic, A. O. Borga, M. Ferianis, M. Predonzani, and F. Rossi, “Bunch Arrival Monitor at FERMI@Elettra”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM086, pp. 394-397.
[n] M. Garber, R. L. Sabatini, W. B. Sampson, and M. Suenaga, “Effect of Cu4Ti Compound Formation on the Characteristics of NbTi Accelerator Magnet Wire”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3681-3684.
[n] T. Torims et al., “Development of additively manufactured 750 MHz RFQ”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB019, unpublished.
[n] A. W. Haberl and A. Taylor, “Operation of a 4 ma. Dynamitron as a Monoenergetic Neutron Source”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 152-156.
[n] M. Steinberg, P. Grand, H. J. C. Kouts, J. R. Powell, and H. Takahashi, “The Linear Accelerator Fuel Enricher Regenerator (LAFER) and Fission Product Transmutor (APEX”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3002-3003.
[n] B. Campbell, K. C. D. Chan, E. Newman, and R. Valicenti, “APT Cryomodule Assembly Process and Mockup Model”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP130, pp. 971-973.
[n] K. N. Sjobak, R. Bruce, H. Burkhardt, A. Macpherson, A. Santamar?¡a Garc?¡a, and R. Kwee-Hinzmann, “Time Scale of Crab Cavity Failures Relevant for High Luminosity LHC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4196-4199. doi:10.18429/JACoW-IPAC2016-THPOY043
[n] K. Bane, C. Adolphsen, T. L. Lavine, M. Ross, J. Seeman, and K. Thompson, “Measurements of Longitudinal Phase Space in the SLC Linac”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1762-1765.
[n] R. E. Worsham et al., “A 4-MeV Experimental Separated-Orbit Cyclotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 760-764.
[n] G. I. Kwon, J. S. Hong, T. G. Lee, W. R. Lee, J. S. Park, and T. H. Tak, “Development of Real-Time Data Publish and Subscribe System Based on Fast RTPS for Image Data Transmission”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 473-477. doi:10.18429/JACoW-ICALEPCS2017-TUPHA040
[n] B. Hafizi, J. Penano, and P. Sprangle, “Lethargy in an Optically Guided FEL Amplifier”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH039, pp. XX-XX.
[n] F. Follin, R. Alemany-Fernandez, and R. Jacobsson, “Online Luminosity Optimization at the LHC”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC123, pp. 1351-1354.
[n] D. P. Piso, J. Lundgren, M. Rescic, R. Sj?Âholm, T. Ranstorp, and R. Schmidt, “Infrastructure Controls Integration at ESS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3168-3170. doi:10.18429/JACoW-IPAC2014-THPRO117
[n] R. F. Hubbard et al., “Simulation of Accelerated Electron Spectra in Laser Wakefield Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAB004, pp. 716-718.
[n] M. Liu, D. K. Liu, C. X. Yin, and L. Y. Zhao, “Development Status of SINAP Timing System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME032, pp. 2992-2994.
[n] K. Noda et al., “Experimental studies of stability issues at HIMAC cooler”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEAY03, pp. 197-201.
[n] D. Evans, R. Valicenti, and F. W. Wood, “Integrated Design of the SSC Linac Injector”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-68, pp. 238-240.
[n] K. Manukyan, G. A. Amatuni, B. Grigoryan, V. Sahakyan, A. Sargsyan, and G. S. Zanyan, “Beam Diagnostics for AREAL RF Photogun Linac”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB60, pp. 212-214.
[n] D. Berley and G. T. Danby, “Limitations of Heavy Ion Synchrotron Accelerators for Inertial Fusion”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1028-1031.
[n] H. Gassot et al., “Mechanical Stiffening of SRF Niobium Cavities by Thermal Sprayed Coating”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP024, pp. 472-477.
[n] S. D?Âbert et al., “S-DALINAC Status Report”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95A11, pp. 57-59.
[n] J. Qiang et al., “Development of an Advanced Computational Tool for Start-to-End Modeling of Next Generation Light Sources”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUEPPB013, pp. 1143-1145.
[n] N. Yu. Kazarinov, D. Boutin, and F. R. Osswald, “Induced Heating Power Evaluation in RIB Transfer Line of SPIRAL2”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 570-572. doi:10.18429/JACoW-IPAC2014-MOPRI001
[n] S. L. Birch and S. P. Stoneham, “10Hz Pulsed Power Converters for the ISIS Second Target Station(TS-2)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD004, pp. 1440-1442.
[n] R. Helm et al., “Recent Improvements in Luminosity at PEP”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2001-2004.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Gassot, “Mechanical Stability of the RF Superconducting Cavities”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO039, pp. 2235-2237.
- B. M. Campbell, K. C. Dominic Chan, R. C. Gentzlinger, J. P. Kelley, B. Rusnak, and H. Safa, “Engineering Development of Superconducting RF Linac for High-Power Applications”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP14F, pp. 1843-1845.
- J. B. Ball et al., “The Holifield Heavy Ion Research Facility - Phase II”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3727-3730.
- M. T. Lynch et al., “Linac Design Study for an Intense Neutron-Source Driver”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1683-1686.
- R. Ischebeck et al., “Measurement of the Transverse Coherence of the TTF Free Electron Laser”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT044, pp. 2580-2582.
- L. Masetti et al., “A Scalable and Homogeneous Web-Based Solution for Presenting CMS Control System Data”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOAAB01, pp. 1040-1043.
- M. Solfaroli Camillocci et al., “Commissioning of the LHC Magnet Powering System in 2009”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB045, pp. 376-378.
- A. J. Mendez, J. B. Ball, D. Dowling, S. W. Mosko, and B. A. Tatum, “The Oak Ridge Isochronous Cyclotron Refurbishment Project”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP237, pp. 1930-1932.
- V. M. Borin, L. M. Schegolev, O. A. Shevchenko, N. A. Vinokurov, V. L. Dorokhov, and O. I. Meshkov, “An Experimental Study of Beam Dynamics in the ERL-Based Novosibirsk Free Electron Laser”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3781-3783.
- E. Bouquerel, M. Dracos, and F. R. Osswald, “Preliminary Design of a 4 MW Proton Beam Switchyard for a Neutrino Super Beam Production Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO004, pp. 1880-1882.
- D. Fernandez-Carreiras et al., “Alba, the PLC Based Protection Systems”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEC003, pp. 397-399.
- E. Al-Dmour et al., “MAX 4U: an upgrade of the MAX IV 3 GeV ring”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS061, pp. 752-755.
- C. O. Domínguez and F. Zimmermann, “Luminosity Optimization for a Higher-Energy LHC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ014, pp. 1831-1833.
- M. Blaskiewicz and W. T. Weng, “Effect of Space Charge Tune Shift on Transverse Instabilities”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1165-1168.
- M. Modena, H. Hsieh, and C. Sanelli, “High Current Density Septa for DAPhiNE Accumulator and Storage Rings”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1472-1475.
- V. M. Borin et al., “Measurements of Energy Spread at VEPP-4M”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 469-471.
- L. Pavlovic, A. O. Borga, M. Ferianis, M. Predonzani, and F. Rossi, “Bunch Arrival Monitor at FERMI@Elettra”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM086, pp. 394-397.
- M. Garber, R. L. Sabatini, W. B. Sampson, and M. Suenaga, “Effect of Cu4Ti Compound Formation on the Characteristics of NbTi Accelerator Magnet Wire”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3681-3684.
- T. Torims et al., “Development of additively manufactured 750 MHz RFQ”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper THPB019, unpublished.
- A. W. Haberl and A. Taylor, “Operation of a 4 ma. Dynamitron as a Monoenergetic Neutron Source”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 152-156.
- M. Steinberg, P. Grand, H. J. C. Kouts, J. R. Powell, and H. Takahashi, “The Linear Accelerator Fuel Enricher Regenerator (LAFER) and Fission Product Transmutor (APEX”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3002-3003.
- B. Campbell, K. C. D. Chan, E. Newman, and R. Valicenti, “APT Cryomodule Assembly Process and Mockup Model”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP130, pp. 971-973.
- K. N. Sjobak, R. Bruce, H. Burkhardt, A. Macpherson, A. Santamar?¡a Garc?¡a, and R. Kwee-Hinzmann, “Time Scale of Crab Cavity Failures Relevant for High Luminosity LHC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4196-4199.
- K. Bane, C. Adolphsen, T. L. Lavine, M. Ross, J. Seeman, and K. Thompson, “Measurements of Longitudinal Phase Space in the SLC Linac”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1762-1765.
- R. E. Worsham et al., “A 4-MeV Experimental Separated-Orbit Cyclotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 760-764.
- G. I. Kwon, J. S. Hong, T. G. Lee, W. R. Lee, J. S. Park, and T. H. Tak, “Development of Real-Time Data Publish and Subscribe System Based on Fast RTPS for Image Data Transmission”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 473-477.
- B. Hafizi, J. Penano, and P. Sprangle, “Lethargy in an Optically Guided FEL Amplifier”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH039, pp. XX-XX.
- F. Follin, R. Alemany-Fernandez, and R. Jacobsson, “Online Luminosity Optimization at the LHC”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC123, pp. 1351-1354.
- D. P. Piso, J. Lundgren, M. Rescic, R. Sj?Âholm, T. Ranstorp, and R. Schmidt, “Infrastructure Controls Integration at ESS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3168-3170.
- R. F. Hubbard et al., “Simulation of Accelerated Electron Spectra in Laser Wakefield Accelerators”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FOAB004, pp. 716-718.
- M. Liu, D. K. Liu, C. X. Yin, and L. Y. Zhao, “Development Status of SINAP Timing System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME032, pp. 2992-2994.
- K. Noda et al., “Experimental studies of stability issues at HIMAC cooler”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEAY03, pp. 197-201.
- D. Evans, R. Valicenti, and F. W. Wood, “Integrated Design of the SSC Linac Injector”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-68, pp. 238-240.
- K. Manukyan, G. A. Amatuni, B. Grigoryan, V. Sahakyan, A. Sargsyan, and G. S. Zanyan, “Beam Diagnostics for AREAL RF Photogun Linac”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPB60, pp. 212-214.
- D. Berley and G. T. Danby, “Limitations of Heavy Ion Synchrotron Accelerators for Inertial Fusion”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1028-1031.
- H. Gassot et al., “Mechanical Stiffening of SRF Niobium Cavities by Thermal Sprayed Coating”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP024, pp. 472-477.
- S. D?Âbert et al., “S-DALINAC Status Report”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95A11, pp. 57-59.
- J. Qiang et al., “Development of an Advanced Computational Tool for Start-to-End Modeling of Next Generation Light Sources”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUEPPB013, pp. 1143-1145.
- N. Yu. Kazarinov, D. Boutin, and F. R. Osswald, “Induced Heating Power Evaluation in RIB Transfer Line of SPIRAL2”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 570-572.
- S. L. Birch and S. P. Stoneham, “10Hz Pulsed Power Converters for the ISIS Second Target Station(TS-2)”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD004, pp. 1440-1442.
- R. Helm et al., “Recent Improvements in Luminosity at PEP”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2001-2004.
Back to search