Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Phimsen et al., “Conceptual Design of Vacuum Chamber for SPS-II Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1666-1668. doi:10.18429/JACoW-IPAC2019-TUPGW109
[n] J. Y. Jung, S. Marks, and R. Schlueter, “Testing and Commissioning of the ALS Adjustable, Hysteresis-Free Chicane Magnet”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB084, pp. 3458-3460.
[n] D. Anderson et al., “RF Power Source Development at the RTA Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP071L, pp. 2149-2151.
[n] S. Sampayan et al., “Performance Characteristics of an Induction Linac Magnetic Pulse Compression Modulator at Multi-Kilohertz Pulse Repetition Frequencies”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3097-3100.
[n] A. Dolinskii et al., “Simulation Results on Cooling Times and Equilibrium Parameters for Antiproton Beams at the HESR”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT057, pp. 1972-1974.
[n] A. V. Aleksandrov et al., “Spallation Neutron Source Linac Beam Position and Phase Monitor System”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP003, pp. 247-249.
[n] P. Ninin and L. Scibile, “The LHC Access Control System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT031, pp. 1900-1902.
[n] D. Proch, “Storage Ring Beam Tests”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87A03, pp. XX-XX.
[n] L. Tkachenko et al., “Comparison of Three Designs of Wide Aperture Dipole for SIS300 Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF063, pp. 1747-1749.
[n] E. Haebel, “Higher Order Mode Suppression in Accelerating Structures”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 307-312.
[n] O. Turgut, J. D. Fox, C. H. Rivetta, W. H?Âfle, and S. M. Rock, “Identification of Intra-bunch Transverse Dynamics for Feedback Control Purposes at CERN Super Proton Synchrotron”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB24, pp. 79-83.
[n] V. Rodin, A. Farricker, N. Kumar, and C. P. Welsch, “Optimization of Antiproton-Atom Collision Studies Using GEANT4”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3126-3129. doi:10.18429/JACoW-IPAC2021-WEPAB213
[n] D. E. Rees et al., “The RF System Design for the Spallation Neutron Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH099, pp. 1002-1004.
[n] J. Resta-L??pez, A. P. Foussat, G. Kirby, I. Martel, and V. Rodin, “Design and Beam Dynamics Studies of a Novel Compact Recoil Separator Ring for Nuclear Research with Radioactive Beams”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3031-3034. doi:10.18429/JACoW-IPAC2021-WEPAB180
[n] H. Padamsee et al., “Superconducting RF Activities at Cornell University”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87A02, pp. XX-XX.
[n] J. Chen, Y.-S. Cheng, K. T. Hsu, K. H. Hu, C. Y. Liao, and C. Y. Wu, “Injection Control of the TPS”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 80-82. doi:10.18429/JACoW-PCaPAC2018-WEP21
[n] P. Bernard et al., “Status Report of the Superconducting 5-Cell Acceleration Structure at CERN”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3342-3345.
[n] I. Bogdanov et al., “Study of the Quench Process in Fast-cycling Dipole for the SIS300 Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF062, pp. 1744-1746.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Phimsen et al., “Conceptual Design of Vacuum Chamber for SPS-II Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1666-1668.
- J. Y. Jung, S. Marks, and R. Schlueter, “Testing and Commissioning of the ALS Adjustable, Hysteresis-Free Chicane Magnet”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB084, pp. 3458-3460.
- D. Anderson et al., “RF Power Source Development at the RTA Test Facility”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP071L, pp. 2149-2151.
- S. Sampayan et al., “Performance Characteristics of an Induction Linac Magnetic Pulse Compression Modulator at Multi-Kilohertz Pulse Repetition Frequencies”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3097-3100.
- A. Dolinskii et al., “Simulation Results on Cooling Times and Equilibrium Parameters for Antiproton Beams at the HESR”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT057, pp. 1972-1974.
- A. V. Aleksandrov et al., “Spallation Neutron Source Linac Beam Position and Phase Monitor System”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP003, pp. 247-249.
- P. Ninin and L. Scibile, “The LHC Access Control System”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT031, pp. 1900-1902.
- D. Proch, “Storage Ring Beam Tests”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87A03, pp. XX-XX.
- L. Tkachenko et al., “Comparison of Three Designs of Wide Aperture Dipole for SIS300 Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF063, pp. 1747-1749.
- E. Haebel, “Higher Order Mode Suppression in Accelerating Structures”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 307-312.
- O. Turgut, J. D. Fox, C. H. Rivetta, W. H?Âfle, and S. M. Rock, “Identification of Intra-bunch Transverse Dynamics for Feedback Control Purposes at CERN Super Proton Synchrotron”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOPAB24, pp. 79-83.
- V. Rodin, A. Farricker, N. Kumar, and C. P. Welsch, “Optimization of Antiproton-Atom Collision Studies Using GEANT4”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3126-3129.
- D. E. Rees et al., “The RF System Design for the Spallation Neutron Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH099, pp. 1002-1004.
- J. Resta-L??pez, A. P. Foussat, G. Kirby, I. Martel, and V. Rodin, “Design and Beam Dynamics Studies of a Novel Compact Recoil Separator Ring for Nuclear Research with Radioactive Beams”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3031-3034.
- H. Padamsee et al., “Superconducting RF Activities at Cornell University”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87A02, pp. XX-XX.
- J. Chen, Y.-S. Cheng, K. T. Hsu, K. H. Hu, C. Y. Liao, and C. Y. Wu, “Injection Control of the TPS”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 80-82.
- P. Bernard et al., “Status Report of the Superconducting 5-Cell Acceleration Structure at CERN”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3342-3345.
- I. Bogdanov et al., “Study of the Quench Process in Fast-cycling Dipole for the SIS300 Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF062, pp. 1744-1746.
Back to search