JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	F. Osmic et al., “Overview of the Beam Diagnostics in the MedAustron Accelerator: Design Choices and Test Beam Commissioning”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR002, pp. 774-776. 
[n]	P. Anthouard et al., “AIRIX Prototype Technological Results at CESTA”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P071, pp. 1254-1256. 
[n]	L. Zeng et al., “The Beam-Based Alignment Simulation and Preliminary Experiment at SXFEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1804-1807. doi:10.18429/JACoW-IPAC2019-TUPRB054
[n]	J. Zichy, Ch. Markovits, and L. Rezzonico, “The Design, Assembly and Performance of the SIN Beam Transfer Line”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-21, pp. 306-311. 
[n]	W. M. Roach, D. Beringer, C. Clavero, R. A. Lukaszew, and C. E. Reece, “Investigation of Epitaxial Niobium Thin Films Grown on Different Surfaces Suitable for SRF Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO062, pp. 874-876. 
[n]	C. H. Huang, Y.-S. Cheng, P. C. Chiu, K. T. Hsu, D. Lee, and C. Y. Liao, “Vibration Measurement of the Magnets in the Storage Ring of TPS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1112-1115. doi:10.18429/JACoW-IPAC2015-MOPTY075
[n]	A. N. Ermakov, V. I. Shvedunov, and V. S. Skachkov, “A Fixed Gradient Rare Earth Permanent Alpha-Magnet”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3B18, pp. 2125-2127. 
[n]	L. Wang et al., “Design of a Test Cryomodule for IMP ADS-Injector II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME020, pp. 3546-3548. 
[n]	A. H. Lumpkin, F. Sakamoto, and B. X. Yang, “Dual-Sweep Streak Camera Measurements of the APS User Beams”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT086, pp. 4185-4187. 
[n]	J. S. Eldred, M. Backfish, C.-Y. Tan, R. M. Zwaska, and S. Kato, “Beam Tests of Diamond-Like Carbon Coating for Mitigation of Electron Cloud”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4497-4500. doi:10.18429/JACoW-IPAC2017-THPVA031
[n]	A. Barbalace, A. Luchetta, G. Manduchi, C. Taliercio, B. Carvalho, and D. F. Valc?írcel, “Comparative Analysis of EPICS IOC and MARTe for the Development of a Hard Real-Time Control Application”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN036, pp. 961-964. 
[n]	R. Racz et al., “Application of an ECR Ion Source for Ionic Functionalization of Implant Materials on the Nanoscale”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper THOMMH02, pp. 135-139. 
[n]	T. L. Owens and O. A. Calvo, “Feedback Control of the Upgraded Linac at Fermilab”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1876-1879. 
[n]	K. Moriyama and T. Nakatani, “A Data Management Infrastructure for Neutron Scattering Experiments in J-PARC/MLF”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 834-837. doi:10.18429/JACoW-ICALEPCS2015-WEPGF060
[n]	C. Feng, J. H. Chen, W. Fang, Q. Gu, D. Wang, and Z. T. Zhao, “Design of a Compact Hard X-Ray Free Electron Laser at SSRF”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPB16, pp. 626-628. 
[n]	C.-Y. Liu, Y. S. Wong, J.-C. Huang, and K.-B. Liu, “Analysis of the bi-bridge topology and power device circuit of the TPS booster dipole power supply”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3779-3781. doi:10.18429/JACoW-IPAC2023-WEPM088
[n]	F. Saito, “APPLICATION OF AN ELECTRO-CHEMICAL PROCEDURE TO THE PRODUCTION OF 18F-PHARMACEUTICALS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P01, pp. XX-XX. 
[n]	B. P. Murin, A. P. Durkin, O. Yu. Shlygin, and I. V. Shumakov, “Super High-Power RF Regotron-Type Generator for Linear Accelerator with High Mean Currents”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH402, pp. 584-586. 
[n]	J.-C. Huang, C.-Y. Liu, K.-B. Liu, and Y. S. Wong, “Realization of temperature compensated TPS correction magnet power supply”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3782-3784. doi:10.18429/JACoW-IPAC2023-WEPM089
[n]	D. A. Ovsyannikov, A. D. Ovsyannikov, “New Approach to Optimization of RFQ Radial Matching Section”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA013, pp. 1351-1353. 
[n]	K. Saito et al., “High Gradient Performance by Electropolishing with 1300 MHz Single and Multi-cell Niobium Superconducting Cavities”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP033, pp. 288-291. 
[n]	J. Burns, “Magnet Design for the DARHT Linear Induction Accelerators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2110-2113. 
[n]	S. P. Moeller, “ASTRID - A Small Multi-Purpose Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 158-161. 
[n]	T. Kikuchi, S. Kawata, and K. Takayama, “Half-mini Beta Optics with a Bunch Rotation for Warm Dense Matter Science Facility in KEK”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN066, pp. 1541-1543. 
[n]	V. V. Altsybeyev and D. A. Ovsyannikov, “Optimization of Beam Parameters in APF Channel”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP130, pp. 722-725. 
[n]	G. Tosin and R. A. Pimenta, “Some Remarks about Characterization of Magnetic Blocks with Helmholtz Coil”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC161, pp. 2386-2388. 
[n]	Y.-S. Cheng, J. Chen, P. C. Chiu, K. T. Hsu, C. H. Huang, and C. Y. Liao, “Development of EPICS Applications for the Taiwan Light Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1116-1119. doi:10.18429/JACoW-IPAC2015-MOPTY076
[n]	J. Y. Tang and J. C. Nugent, “Recent Results from MICE on Multiple Coulomb Scattering and Energy Loss”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 267-269. doi:10.18429/JACoW-LINAC2018-MOPO127
[n]	J. S. Sekutowicz et al., “Status of Nb-Pb Superconducting RF-Gun Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN021, pp. 962-964. 
[n]	D. A. Ovsyannikov and E. D. Kotina, “Reconstruction of Velocity Field”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper THSCC2, pp. 256-258. 
[n]	E. Zaplatin, W. Braeutigam, M. Pap, M. Skrobucha, and R. Stassen, “Low-Beta SC H-Cavity for ESS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO018, pp. 2300-2301. 
[n]	C. S. Park, “Multi–objective Bayesian optimization of an electron injector linac for 4th generation light sources: A comparative Study with MOGA”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 686-690. doi:10.18429/JACoW-NAPAC2025-WECN03
[n]	Ph. Anthouard et al., “High Current and High Energy AIRIX Induction Accelerator Development”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP014G, pp. 753-755. 
[n]	R. J. England et al., “Manufacture and Testing of Optical-scale Accelerator Structures from Silicon and Silica”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUYB02, pp. 1050-1053. 
[n]	J. L. Turner et al., “FEL Beam Stability in the LCLS”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP168, pp. 2423-2425. 
[n]	A. Kitagawa, S. Biri, A. G. Drentje, M. Muramatsu, W. Takasugi, and M. Wakaisami, “Production of Multi-Charged Ions for Experimental Use at HIMAC”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-12, pp. 92-95. 
[n]	R. Nagai et al., “High-Voltage Test of a 500-kV Photo-Cathode DC Gun for the ERL Light Sources in Japan”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE093, pp. 2341-2343. 
[n]	H. Hotchi, J. Kishiro, S. Machida, A. Y. Molodojentsev, F. Noda, and N. Tani, “Evaluation of Nonlinear Effects in the 3GeV Rapid Cycling Synchrotron of J-PARC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE004, pp. 916-918. 
[n]	M. A. Leitner, C. M. Lyneis, and D. Wutte, “The Berkeley 88-Inch Cyclotron Injector System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6A02, pp. 1634-1638. 
[n]	J. D. Fuerst, M. Kedzie, K. W. Shepard, Z. A. Conway, and M. Kelly, “Superconducting beta=0.15 Quarter-Wave Cavity for RIA”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP05, pp. 605-607. 
[n]	W. Peter, R. J. Faehl, A. Kadish, and L. E. Thode, “Criteria for Vacuum Breakdown in RF Cavities”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3454-3457. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search