Favourites
For Word
[n] A. I. Ageev et al., “The IHEP Accelerating and Storage Complex - Status and Development”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 233-237.
[n] R. L. Keizer et al., “Design and Performance of a Prototype Synchronous High Tension Discharge Switch for the Separation System of the LEP ee- Collider”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1190-1193.
[n] N. R. Neveu et al., “Bunch Length Measurements Using CTR at the AWA with Comparison to Simulation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4166-4168. doi:10.18429/JACoW-IPAC2018-THPMF048
[n] R. Andersson, E. Bargall??, and A. Nordt, “Development of an Analysis Framework for the Beam Instrumentation Interface to the Beam Interlock System at ESS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4185-4188. doi:10.18429/JACoW-IPAC2016-THPOY039
[n] M. Schneider and J. Grillenberger, “Upgrade of the PSI Injector 2 Cyclotron”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 123-126. doi:10.18429/JACoW-CYCLOTRONS2019-MOC03
[n] Y. C. Chae, “Longitudinal Coupling Impedance of a Hole in an Infinite Plane Screen”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPQ20, pp. 2995-2997.
[n] E. Bondarchuk et al., “Normal Conducting QM Quadrupole for the HERA Luminosity Upgrade”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP50C, pp. 1972-1974.
[n] N. Vitoratou, L. Bobb, A. Last, and G. Rehm, “X-Ray Pinhole Camera Spatial Resolution Using High Aspect Ratio LIGA Pinhole Apertures”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 71-75. doi:10.18429/JACoW-IBIC2022-MOP18
[n] Y. C. Nie, M. Huening, C. Liebig, and M. Schmitz, “RF Tuning of a S-band Hybrid Buncher for Injector Upgrade of LINAC II at DESY”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP022, pp. 478-480.
[n] Y. C. Chae, “Investigation of Resistive Wall Instability in the 7-GeV APS Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPQ21, pp. 2998-3000.
[n] V. I. Gordin, R. N. Litunovsky, A. K. Vaganov, V. S. Vasil, and D. V. Efremov, “The Diagnostics of the Beam Phase Characteristics of the 240 cm Isochronous Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-26, pp. 2401-2402.
[n] G. Geloni, V. Kocharyan, and E. Saldin, “Control of the Amplification Process in Baseline XFEL Undulators With Mechanical SASE Switchers”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPA02, pp. 570-573.
[n] M. R. Shubaly, R. G. Maggs, and A. E. Weeden, “A High-Current Oxygen Ion Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1751-1754.
[n] R. Andersson, E. Bargall??, A. Nordt, and E. Adli, “Machine Protection Systems and their Impact on Beam Availability and Accelerator Reliability”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1029-1032. doi:10.18429/JACoW-IPAC2015-MOPTY044
For LaTeX
Use Complete Form
For BibTeX
References
- A. I. Ageev et al., “The IHEP Accelerating and Storage Complex - Status and Development”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 233-237.
- R. L. Keizer et al., “Design and Performance of a Prototype Synchronous High Tension Discharge Switch for the Separation System of the LEP ee- Collider”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1190-1193.
- N. R. Neveu et al., “Bunch Length Measurements Using CTR at the AWA with Comparison to Simulation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4166-4168.
- R. Andersson, E. Bargall??, and A. Nordt, “Development of an Analysis Framework for the Beam Instrumentation Interface to the Beam Interlock System at ESS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4185-4188.
- M. Schneider and J. Grillenberger, “Upgrade of the PSI Injector 2 Cyclotron”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 123-126.
- Y. C. Chae, “Longitudinal Coupling Impedance of a Hole in an Infinite Plane Screen”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPQ20, pp. 2995-2997.
- E. Bondarchuk et al., “Normal Conducting QM Quadrupole for the HERA Luminosity Upgrade”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP50C, pp. 1972-1974.
- N. Vitoratou, L. Bobb, A. Last, and G. Rehm, “X-Ray Pinhole Camera Spatial Resolution Using High Aspect Ratio LIGA Pinhole Apertures”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 71-75.
- Y. C. Nie, M. Huening, C. Liebig, and M. Schmitz, “RF Tuning of a S-band Hybrid Buncher for Injector Upgrade of LINAC II at DESY”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP022, pp. 478-480.
- Y. C. Chae, “Investigation of Resistive Wall Instability in the 7-GeV APS Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPQ21, pp. 2998-3000.
- V. I. Gordin, R. N. Litunovsky, A. K. Vaganov, V. S. Vasil, and D. V. Efremov, “The Diagnostics of the Beam Phase Characteristics of the 240 cm Isochronous Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-26, pp. 2401-2402.
- G. Geloni, V. Kocharyan, and E. Saldin, “Control of the Amplification Process in Baseline XFEL Undulators With Mechanical SASE Switchers”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THPA02, pp. 570-573.
- M. R. Shubaly, R. G. Maggs, and A. E. Weeden, “A High-Current Oxygen Ion Source”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1751-1754.
- R. Andersson, E. Bargall??, A. Nordt, and E. Adli, “Machine Protection Systems and their Impact on Beam Availability and Accelerator Reliability”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1029-1032.
Back to search
