Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Blom, B. Glimelius, E. Grusell, S. Lorin, J. Medin, and N. Tilly, “Development of a Scanning System for Proton Therapy in Uppsala”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP02C, pp. 2450-2451.
[n] A. Olmos, F. P?®rez, and G. Rehm, “Matlab Code for BPM Button Geometry Computation”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC19, pp. 186-188.
[n] G. Decker Argonne National Laboratory, “Orbit Control at the Advanced Photon Source”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM07, pp. XX-XX.
[n] A. Valentinov, A. Kadnikov, Y. Krylov, S. Kuznetsov, and Y. Yupinov, “Control System of the Synchrotron Radiation Source SIBERIA-2”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA04, pp. 2199-2201.
[n] M. Omet et al., “Operation Experiences with the MICROTCA.4-based LLRF Control System at FLASH”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 844-846. doi:10.18429/JACoW-IPAC2015-MOPHA029
[n] I. Rutkowski, K. Czuba, and M. G. Grzegrzolka, “LO Board for 704.42 MHz Cavity Simulator for ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1573-1576. doi:10.18429/JACoW-ICALEPCS2017-THPHA081
[n] R. J. Steinhagen et al., “Results of the LHC Prototype Chromaticity Measurement System Studies in the CERN-SPS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC098, pp. 1290-1292.
[n] O. Chubar et al., “Electron Beam Size and Profile Measurements with Refractive X-Ray Lenses”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4B10, pp. 1824-1828.
[n] J. Rathke, “Cavity Production and R&D in US Industry”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THIAKI01, pp. 2670-2670.
[n] T. Kasuga, M. Mochihashi, T. Obina, and Y. Tanimoto, “Optical Bunch-By-Bunch Diagnostic System in KEK-PF”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS03, pp. XX-XX.
[n] M. Ross, “Review Of Diagnostics For Next Generation Linear Accelerators”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper IT01, pp. XX-XX.
[n] T. S. Ueng, K. T. Hsu, C. S. Fang, Y. M. Chang, and K. K. Lin, “Turn-by-Turn Beam Position Measurement for 1.3 GeV Booster Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ32, pp. 2524-2526.
[n] J. Urbin and R. D. Nolte, “Large Helium Refrigeration Plant Operating Experience”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THICKI03, pp. 2700-2700.
[n] J. L. Rothman and E. B. Blum, “Charge Balancing Fill Rate Monitor”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ01, pp. 2450-2451.
[n] K. E. Hacker et al., “Progress Towards HGHG and EEHG at FLASH”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD13, pp. 257-260.
[n] G. A. Naylor Grenoble, “DSP and FPGA Based Bunch Current Signal Processing”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM21, pp. XX-XX.
[n] C.-H. Chang et al., “Conceptual Designs of Magnet Systems for the Taiwan Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT076, pp. 3979-3981.
[n] K. Olsen, “Introduction to the PAC'07 International Industrial Forum for the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THIIKI01, pp. 2664-2664.
[n] M. Ferianis and R. De Monte, “The Low Gap BPM System at ELETTRA: Commissioning Results”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM06, pp. XX-XX.
[n] M. Jensen, “Operational Experience with SRF Cavities for Light Sources”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOIOB05, pp. 27-31.
[n] S. Chunjarean, C.-S. Hwang, J. C. Jan, F.-Y. Lin, and P. H. Lin, “Field Optimization in Superconducting Undulators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP079, pp. 2450-2452.
[n] M. Leitner et al., “Design Status of the SRF Linac Systems for the Facility for Rare Isotope Beams”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO009, pp. 56-64.
[n] T. K. Charles, J. Bj?Ârklund Svensson, A. Latina, and S. Thorin, “First Experimental Measurements of the Caustic Nature of Trajectories in Bunch Compressors”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2270-2273. doi:10.18429/JACoW-IPAC2019-WEYYPLS2
[n] M. A. Pop and E. Allaria, “A Peak Finding Algorithm for FEL Spectra Characterization”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1827-1829. doi:10.18429/JACoW-IPAC2019-TUPRB070
[n] G. Swain, M. Burns, and P. Busch, “Generating Catalogs of Transverse Matching Solutions”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 598-601.
[n] F. Nolden Gesellschaft f??r Schwerionenforschung, “Instrumentation And Diagnostics Using Schottky Signals”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper IT02, pp. XX-XX.
[n] R. Sabattier, N. Breteau, and G. Goin, “The Tenth Year of the Orleans Neutrontherapy Facility”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1810-1812.
[n] S. A. Pande, R. Bartolini, R. T. Fielder, and M. Jensen, “Impedance Estimation of Diamond Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP058, pp. 1673-1675.
[n] U. Mavric et al., “Commissioning of the Low-Noise MTCA.4-based Local Oscillator and Clock Generation Module”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 847-849. doi:10.18429/JACoW-IPAC2015-MOPHA030
[n] E. B. Forsyth and Y. Y. Lee, “Design and Status of the AGS Booster Accelerator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 867-870.
[n] J. D. Gilpatrick and C. A. Watson, “Reconstruction of Longitudinal Beam Profiles from Nondestructive Electromagnetic Probes”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1965-1967.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Blom, B. Glimelius, E. Grusell, S. Lorin, J. Medin, and N. Tilly, “Development of a Scanning System for Proton Therapy in Uppsala”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP02C, pp. 2450-2451.
- A. Olmos, F. P?®rez, and G. Rehm, “Matlab Code for BPM Button Geometry Computation”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPC19, pp. 186-188.
- G. Decker Argonne National Laboratory, “Orbit Control at the Advanced Photon Source”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PM07, pp. XX-XX.
- A. Valentinov, A. Kadnikov, Y. Krylov, S. Kuznetsov, and Y. Yupinov, “Control System of the Synchrotron Radiation Source SIBERIA-2”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA04, pp. 2199-2201.
- M. Omet et al., “Operation Experiences with the MICROTCA.4-based LLRF Control System at FLASH”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 844-846.
- I. Rutkowski, K. Czuba, and M. G. Grzegrzolka, “LO Board for 704.42 MHz Cavity Simulator for ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1573-1576.
- R. J. Steinhagen et al., “Results of the LHC Prototype Chromaticity Measurement System Studies in the CERN-SPS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC098, pp. 1290-1292.
- O. Chubar et al., “Electron Beam Size and Profile Measurements with Refractive X-Ray Lenses”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4B10, pp. 1824-1828.
- J. Rathke, “Cavity Production and R&D in US Industry”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THIAKI01, pp. 2670-2670.
- T. Kasuga, M. Mochihashi, T. Obina, and Y. Tanimoto, “Optical Bunch-By-Bunch Diagnostic System in KEK-PF”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PS03, pp. XX-XX.
- M. Ross, “Review Of Diagnostics For Next Generation Linear Accelerators”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper IT01, pp. XX-XX.
- T. S. Ueng, K. T. Hsu, C. S. Fang, Y. M. Chang, and K. K. Lin, “Turn-by-Turn Beam Position Measurement for 1.3 GeV Booster Synchrotron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ32, pp. 2524-2526.
- J. Urbin and R. D. Nolte, “Large Helium Refrigeration Plant Operating Experience”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THICKI03, pp. 2700-2700.
- J. L. Rothman and E. B. Blum, “Charge Balancing Fill Rate Monitor”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ01, pp. 2450-2451.
- K. E. Hacker et al., “Progress Towards HGHG and EEHG at FLASH”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUPD13, pp. 257-260.
- G. A. Naylor Grenoble, “DSP and FPGA Based Bunch Current Signal Processing”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PM21, pp. XX-XX.
- C.-H. Chang et al., “Conceptual Designs of Magnet Systems for the Taiwan Photon Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT076, pp. 3979-3981.
- K. Olsen, “Introduction to the PAC'07 International Industrial Forum for the ILC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THIIKI01, pp. 2664-2664.
- M. Ferianis and R. De Monte, “The Low Gap BPM System at ELETTRA: Commissioning Results”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PM06, pp. XX-XX.
- M. Jensen, “Operational Experience with SRF Cavities for Light Sources”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOIOB05, pp. 27-31.
- S. Chunjarean, C.-S. Hwang, J. C. Jan, F.-Y. Lin, and P. H. Lin, “Field Optimization in Superconducting Undulators”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP079, pp. 2450-2452.
- M. Leitner et al., “Design Status of the SRF Linac Systems for the Facility for Rare Isotope Beams”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO009, pp. 56-64.
- T. K. Charles, J. Bj?Ârklund Svensson, A. Latina, and S. Thorin, “First Experimental Measurements of the Caustic Nature of Trajectories in Bunch Compressors”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2270-2273.
- M. A. Pop and E. Allaria, “A Peak Finding Algorithm for FEL Spectra Characterization”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1827-1829.
- G. Swain, M. Burns, and P. Busch, “Generating Catalogs of Transverse Matching Solutions”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 598-601.
- F. Nolden Gesellschaft f??r Schwerionenforschung, “Instrumentation And Diagnostics Using Schottky Signals”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper IT02, pp. XX-XX.
- R. Sabattier, N. Breteau, and G. Goin, “The Tenth Year of the Orleans Neutrontherapy Facility”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1810-1812.
- S. A. Pande, R. Bartolini, R. T. Fielder, and M. Jensen, “Impedance Estimation of Diamond Cavities”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP058, pp. 1673-1675.
- U. Mavric et al., “Commissioning of the Low-Noise MTCA.4-based Local Oscillator and Clock Generation Module”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 847-849.
- E. B. Forsyth and Y. Y. Lee, “Design and Status of the AGS Booster Accelerator”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 867-870.
- J. D. Gilpatrick and C. A. Watson, “Reconstruction of Longitudinal Beam Profiles from Nondestructive Electromagnetic Probes”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1965-1967.
Back to search