Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. V. Livdahl, “ZGS Injector Observations”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART4-3, pp. 384-397.
[n] S. A. Rice and J. P. Verboncoeur, “Initial Studies of Multipactor Suppression Via TE and TM Modes”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC35, pp. 856-858.
[n] H. G. Koenig et al., “The FAIR-SIS100 Bunch Compressor RF Station”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2759-2761. doi:10.18429/JACoW-IPAC2018-WEPML032
[n] S. R. Marques et al., “Upgrade of the Beam Position Monitors at the Brazilian Synchrotron Light Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP008, pp. 3453-3455.
[n] P. Girault, G. Bienvenu, and D. Tronc, “4PI/5 Backward TW Structure Tested for Electron Linacs Optimization”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1114-1117.
[n] P. Den Hartog and E. Trakhtenberg, “Insertion Device Vacuum Chamber for the Linac Coherent Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB001, pp. 824-826.
[n] M. N. H. Comsan, “Tandem Accelerator Facility at Inshas”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP05C, pp. 2442-2444.
[n] M. Di Carlo, M. Dolci, P. Harding, J. B. Morgado, P. Osorio, and U. Y. Yilmaz, “SKA Tango Operator”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1155-1159. doi:10.18429/JACoW-ICALEPCS2023-TH2AO06
[n] Z. Pan et al., “Beam-Loading Transients and Bunch Shape in the Operation of Passive Harmonic Cavities in the ALS-U”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3298-3300. doi:10.18429/JACoW-IPAC2018-THPAK037
[n] T. M. Huang et al., “High Power Input Couplers for C-ADS”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB101, pp. 1383-1386.
[n] Y. J. Yuan et al., “Status and Upgrades of HIRFL”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper TUM1I01, pp. 110-114.
[n] K. Zwoll, B. Peters, and T. Vashegyi, “A Low Cost Local Area Network for Connecting Accelerator Equipment”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2077-2080.
[n] W. B. Herrmannsfeldt, “Linac Alignment Techniques”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 9-19.
[n] U. Wienands and R. V. Servranckx, “Towards a Slow Extraction System for the Triumf Kaon Factory Extender Ring with 0.1% Losses”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 269-272.
[n] A. Romanov et al., “Overview of the new beam physics research at the IOTA/FAST facility”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPC28, unpublished.
[n] H. Umezawa, F. Furuta, T. Konomi, K. Nishimura, K. Saito, and K. Takeuchi, “Single Crystal Niobium Development”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB073, pp. 438-440.
[n] J. P. Woodruff, D. D. Casavant, B. D. Cline, and M. R. Gorvad, “Quality Control, Testing and Deployment Results in NIF ICCS”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUDT001, pp. XX-XX.
[n] W. Gu, H. Chen, J. Shi, and H. Zha, “X-band electron linear accelerator design for intraoperative radiotherapy”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1288-1290. doi:10.18429/JACoW-IPAC2023-MOPM140
[n] K. Yamamoto, “The Beam Collimator System of J-PARC Rapid Cycling Synchrotron”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC10, pp. 304-311.
[n] K. Kinoshita et al., “Femtosecond Linac-Laser Based Time-Resolved X-Ray Diffractometry for Visualization of Atomic Motions”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP154, pp. 2605-2607.
[n] J. Barranco and Y. Papaphilippou, “Efficiency and Robustness of the PS2 Collimation System”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC01, pp. 259-261.
[n] A. Rauchas, G. Gunderson, V. Stipp, G. Volk, and R. Zolecki, “Intensity Stability Improvements for the Intense Pulsed Neutron Source Accelerator System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2126-2129.
[n] T. Becker et al., “Prototype Developement of the BESSY II Storage Ring Magnetic Elements”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP02, pp. 1325-1327.
[n] J. Bradley, J. D. Crnkovic, B. E. Drendel, D. Stratakis, and N. S. Froemming, “Application of Quad-Scan Measurement Techniques to Muon Beams in the Muon g-2 Experiment”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1852-1855. doi:10.18429/JACoW-IPAC2018-WEPAF016
[n] P. Hurh, O. Caretta, T. R. Davenne, C. J. Densham, P. Loveridge, and N. Simos, “High-Power Targets: Experience and R&D for 2 MW”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEODS2, pp. 1496-1500.
[n] Q. Qin et al., “Overview of the CEPC Accelerator”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THP3H2, pp. 16-21.
For LaTeX
Use Complete Form
For BibTeX
References
- P. V. Livdahl, “ZGS Injector Observations”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART4-3, pp. 384-397.
- S. A. Rice and J. P. Verboncoeur, “Initial Studies of Multipactor Suppression Via TE and TM Modes”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC35, pp. 856-858.
- H. G. Koenig et al., “The FAIR-SIS100 Bunch Compressor RF Station”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2759-2761.
- S. R. Marques et al., “Upgrade of the Beam Position Monitors at the Brazilian Synchrotron Light Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP008, pp. 3453-3455.
- P. Girault, G. Bienvenu, and D. Tronc, “4PI/5 Backward TW Structure Tested for Electron Linacs Optimization”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1114-1117.
- P. Den Hartog and E. Trakhtenberg, “Insertion Device Vacuum Chamber for the Linac Coherent Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB001, pp. 824-826.
- M. N. H. Comsan, “Tandem Accelerator Facility at Inshas”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP05C, pp. 2442-2444.
- M. Di Carlo, M. Dolci, P. Harding, J. B. Morgado, P. Osorio, and U. Y. Yilmaz, “SKA Tango Operator”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TH2AO06, pp. 1155-1159.
- Z. Pan et al., “Beam-Loading Transients and Bunch Shape in the Operation of Passive Harmonic Cavities in the ALS-U”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3298-3300.
- T. M. Huang et al., “High Power Input Couplers for C-ADS”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB101, pp. 1383-1386.
- Y. J. Yuan et al., “Status and Upgrades of HIRFL”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper TUM1I01, pp. 110-114.
- K. Zwoll, B. Peters, and T. Vashegyi, “A Low Cost Local Area Network for Connecting Accelerator Equipment”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2077-2080.
- W. B. Herrmannsfeldt, “Linac Alignment Techniques”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 9-19.
- U. Wienands and R. V. Servranckx, “Towards a Slow Extraction System for the Triumf Kaon Factory Extender Ring with 0.1% Losses”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 269-272.
- A. Romanov et al., “Overview of the new beam physics research at the IOTA/FAST facility”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC28, unpublished.
- H. Umezawa, F. Furuta, T. Konomi, K. Nishimura, K. Saito, and K. Takeuchi, “Single Crystal Niobium Development”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB073, pp. 438-440.
- J. P. Woodruff, D. D. Casavant, B. D. Cline, and M. R. Gorvad, “Quality Control, Testing and Deployment Results in NIF ICCS”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUDT001, pp. XX-XX.
- W. Gu, H. Chen, J. Shi, and H. Zha, “X-band electron linear accelerator design for intraoperative radiotherapy”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM140, pp. 1288-1290.
- K. Yamamoto, “The Beam Collimator System of J-PARC Rapid Cycling Synchrotron”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGC10, pp. 304-311.
- K. Kinoshita et al., “Femtosecond Linac-Laser Based Time-Resolved X-Ray Diffractometry for Visualization of Atomic Motions”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP154, pp. 2605-2607.
- J. Barranco and Y. Papaphilippou, “Efficiency and Robustness of the PS2 Collimation System”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGC01, pp. 259-261.
- A. Rauchas, G. Gunderson, V. Stipp, G. Volk, and R. Zolecki, “Intensity Stability Improvements for the Intense Pulsed Neutron Source Accelerator System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2126-2129.
- T. Becker et al., “Prototype Developement of the BESSY II Storage Ring Magnetic Elements”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAP02, pp. 1325-1327.
- J. Bradley, J. D. Crnkovic, B. E. Drendel, D. Stratakis, and N. S. Froemming, “Application of Quad-Scan Measurement Techniques to Muon Beams in the Muon g-2 Experiment”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1852-1855.
- P. Hurh, O. Caretta, T. R. Davenne, C. J. Densham, P. Loveridge, and N. Simos, “High-Power Targets: Experience and R&D for 2 MW”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEODS2, pp. 1496-1500.
- Q. Qin et al., “Overview of the CEPC Accelerator”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper THP3H2, pp. 16-21.
Back to search