Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. F. Viaud, W. Kozanecki, C. O, J. M. Thompson, and M. Weaver, “Monitoring of Interaction-point Parameters using the 3-dimensional Luminosity Distribution Measured at PEP-II”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS026, pp. 598-600.
[n] J. M. Grames et al., “CEBAF 200 kV Inverted Electron Gun”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEODS3, pp. 1501-1503.
[n] D. E. Young, V. Dudnikov, M. Popovic, C. W. Schmidt, and D. Sun, “Low Energy Improvements to the Fermilab 400-MeV Linear Accelerator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH102, pp. 3915-3917.
[n] J. Sage, M. H. Bickley, and K. S. White, “Using a Nameserver to Enhance Control System Efficiency”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP074, pp. XX-XX.
[n] M. Iwasaki et al., “Design and Status of the SuperKEKB Accelerator Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOCOAAB02, pp. 4-7.
[n] A. T. Young, P. Chen, W. B. Kunkel, K. N. Leung, C. Y. Li, and G. C. Stutzin, “Laser Diagnostics of H- formation in a Magnetic Multicusp Ion Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1916-1919.
[n] M. G. Mazarakis, L. F. Bennett, W. R. Olson, J. W. Poukey, D. L. Smith, and B. N. Turman, “Electron Diodes and Cavity Design for the New 4-MeV Injector of the Recirculating Linear Accelerator (RLA)”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH409, pp. 605-607.
[n] A. Friedman et al., “Progress Toward a Prototype Recirculating Induction Accelerator for Heavy-Ion Fusion”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR14, pp. 828-830.
[n] R. C. Juras, M. J. Meigs, D. K. Olsen, and C. M. Jones, “Use of the Holifield Facility 25-MV Tandem Accelerator in the Oak Ridge Radioactive Ion Beam Project”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1660-1663.
[n] Y. C. Nie, M. Huening, C. Liebig, and M. Schmitz, “Progress in the Injector Upgrade of the LINAC II at DESY”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1479-1481. doi:10.18429/JACoW-IPAC2015-TUPWA032
[n] A. Oppelt et al., “Facility Upgrade at PITZ and First Operation Results”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1518-1521. doi:10.18429/JACoW-IPAC2015-TUPWA046
[n] B. Rusnak et al., “Superconducting Cavity Development at Los Alamos National Laboratory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1046-1048.
[n] M. Ono et al., “Achievement of 40 MV/m Accelerating Field in L- Band SCC at KEK”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C08, pp. 472-484.
[n] A. Lakatos, J. Pozimski, A. Jakob, and H. Klein, “Extraction and Low Energy Transport of Negative Ions”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4056, pp. 523-525.
[n] O. A et al., “Evaluation of the Transverse Impedanse of Pf in-Vacuum Undulator Using Local Orbit Bump Method”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 89-92. doi:10.18429/JACoW-IBIC2018-MOPB08
[n] J. Keil, G. Kube, F. Obier, G. K. Sahoo, and R. Wanzenberg, “Optimization of the Injection Kicker Bump Leakage at PETRA III”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1467-1470. doi:10.18429/JACoW-IPAC2018-TUPMF084
[n] D. Spence, “Plasma Modified Production of High-current, High-purity cw H+, D+ and H- Beams from Microwave-driven Sources”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP10, pp. 71-73.
[n] H. Nishimura, J. L. McDonald, and C. Timossi, “Cross Platform SCA Component using C++ Builder and Kylix”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE028, pp. 2385-2386.
[n] P. Tenenbaum, H. H. Braun, and F. Chautard, “Nulling Emittance Measurement Technique for CLIC Test Facility”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8W017, pp. 479-481.
[n] G. O. Bolme et al., “Measurement of RF Surface Efficiency at Cryogenic Temperatures Using a Coaxial Resonant Cavity”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO459, pp. 213-215.
[n] M. Boscolo et al., “Luminosity Measurement at DAFNE for Crab Waist Scheme”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC065, pp. 1203-1205.
[n] N. Aftab et al., “Improvements in Longitudinal Phase Space Tomography at PITZ”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 105-108. doi:10.18429/JACoW-IBIC2022-MOP28
[n] J. C. T. Thangaraj, C. M. Baffes, D. R. Broemmelsiek, D. J. Crawford, R. M. Thurman-Keup, and W. B. Wortley, “Z-slicer: A Simple Scheme for Electron Beam Current Profile Shaping in a Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP058, pp. 183-186.
[n] W. K. Tucker, D. E. Hasti, and S. L. Shope, “Recirculating Electron Beam Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 957-960.
[n] A. Jakob, H. Klein, A. Lakatos, O. Meusel, and J. Pozimski, “Non Destructive Determination of Beam Emittance for Low Energy Ion Beams using CCD Camera Measurements”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B07, pp. 1800-1802.
[n] R. Keller, P. Allison, and J. D. Sherman, “Use of a Minimum-Elipse Criterion in the Study of Ion-Beam Extraction Systems”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2579-2582.
[n] J. R. Freeman and J. S. Wagner, “Numerical Models of Beam Dynamics in Ion Induction Linacs”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU412, pp. 332-334.
[n] M. Petrichenkov et al., “The Project of Accelerator Mass-Spectrometer at BINP”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF052, pp. 2389-2391.
For LaTeX
Use Complete Form
For BibTeX
References
- B. F. Viaud, W. Kozanecki, C. O, J. M. Thompson, and M. Weaver, “Monitoring of Interaction-point Parameters using the 3-dimensional Luminosity Distribution Measured at PEP-II”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS026, pp. 598-600.
- J. M. Grames et al., “CEBAF 200 kV Inverted Electron Gun”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEODS3, pp. 1501-1503.
- D. E. Young, V. Dudnikov, M. Popovic, C. W. Schmidt, and D. Sun, “Low Energy Improvements to the Fermilab 400-MeV Linear Accelerator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH102, pp. 3915-3917.
- J. Sage, M. H. Bickley, and K. S. White, “Using a Nameserver to Enhance Control System Efficiency”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP074, pp. XX-XX.
- M. Iwasaki et al., “Design and Status of the SuperKEKB Accelerator Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOCOAAB02, pp. 4-7.
- A. T. Young, P. Chen, W. B. Kunkel, K. N. Leung, C. Y. Li, and G. C. Stutzin, “Laser Diagnostics of H- formation in a Magnetic Multicusp Ion Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1916-1919.
- M. G. Mazarakis, L. F. Bennett, W. R. Olson, J. W. Poukey, D. L. Smith, and B. N. Turman, “Electron Diodes and Cavity Design for the New 4-MeV Injector of the Recirculating Linear Accelerator (RLA)”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH409, pp. 605-607.
- A. Friedman et al., “Progress Toward a Prototype Recirculating Induction Accelerator for Heavy-Ion Fusion”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR14, pp. 828-830.
- R. C. Juras, M. J. Meigs, D. K. Olsen, and C. M. Jones, “Use of the Holifield Facility 25-MV Tandem Accelerator in the Oak Ridge Radioactive Ion Beam Project”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1660-1663.
- Y. C. Nie, M. Huening, C. Liebig, and M. Schmitz, “Progress in the Injector Upgrade of the LINAC II at DESY”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1479-1481.
- A. Oppelt et al., “Facility Upgrade at PITZ and First Operation Results”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1518-1521.
- B. Rusnak et al., “Superconducting Cavity Development at Los Alamos National Laboratory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1046-1048.
- M. Ono et al., “Achievement of 40 MV/m Accelerating Field in L- Band SCC at KEK”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C08, pp. 472-484.
- A. Lakatos, J. Pozimski, A. Jakob, and H. Klein, “Extraction and Low Energy Transport of Negative Ions”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4056, pp. 523-525.
- O. A et al., “Evaluation of the Transverse Impedanse of Pf in-Vacuum Undulator Using Local Orbit Bump Method”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 89-92.
- J. Keil, G. Kube, F. Obier, G. K. Sahoo, and R. Wanzenberg, “Optimization of the Injection Kicker Bump Leakage at PETRA III”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1467-1470.
- D. Spence, “Plasma Modified Production of High-current, High-purity cw H+, D+ and H- Beams from Microwave-driven Sources”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP10, pp. 71-73.
- H. Nishimura, J. L. McDonald, and C. Timossi, “Cross Platform SCA Component using C++ Builder and Kylix”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE028, pp. 2385-2386.
- P. Tenenbaum, H. H. Braun, and F. Chautard, “Nulling Emittance Measurement Technique for CLIC Test Facility”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8W017, pp. 479-481.
- G. O. Bolme et al., “Measurement of RF Surface Efficiency at Cryogenic Temperatures Using a Coaxial Resonant Cavity”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO459, pp. 213-215.
- M. Boscolo et al., “Luminosity Measurement at DAFNE for Crab Waist Scheme”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC065, pp. 1203-1205.
- N. Aftab et al., “Improvements in Longitudinal Phase Space Tomography at PITZ”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 105-108.
- J. C. T. Thangaraj, C. M. Baffes, D. R. Broemmelsiek, D. J. Crawford, R. M. Thurman-Keup, and W. B. Wortley, “Z-slicer: A Simple Scheme for Electron Beam Current Profile Shaping in a Linac”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP058, pp. 183-186.
- W. K. Tucker, D. E. Hasti, and S. L. Shope, “Recirculating Electron Beam Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 957-960.
- A. Jakob, H. Klein, A. Lakatos, O. Meusel, and J. Pozimski, “Non Destructive Determination of Beam Emittance for Low Energy Ion Beams using CCD Camera Measurements”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3B07, pp. 1800-1802.
- R. Keller, P. Allison, and J. D. Sherman, “Use of a Minimum-Elipse Criterion in the Study of Ion-Beam Extraction Systems”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2579-2582.
- J. R. Freeman and J. S. Wagner, “Numerical Models of Beam Dynamics in Ion Induction Linacs”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU412, pp. 332-334.
- M. Petrichenkov et al., “The Project of Accelerator Mass-Spectrometer at BINP”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF052, pp. 2389-2391.
Back to search