JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	G. L. Sabbi, A. Faltens, A. F. Lietzke, N. Martovetski, S. Mattafirri, and P. A. Seidl, “Field Quality Optimization of Superconducting Quadrupoles for the HCX Experiment”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper TOAA005, unpublished. 
[n]	J. B. Fitzgerald, B. G. Martlew, C. Morrell, and S. L. Smith, “The Daresbury Global Horizontal Servo Feedback System: Status and Outlook”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP019L, pp. 1848-1850. 
[n]	A. Krusche and M. Paoluzzi, “The New Low Frequency Accelerating Systems for the CERN PS Booster”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP03H, pp. 1782-1783. 
[n]	L. N. Hand and S. Lundgren, “The Design of Low Emittance Electron Storage Rings”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 456-459. 
[n]	E. Paoloni, S. Bettoni, M. E. Biagini, and P. Raimondi, “Magnetic Design Studies for the Final Focus Quadrupoles of the SuperB Large Crossing Angle Collision Scheme”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD002, pp. 2401-2403. 
[n]	B. Aune et al., “Towards a 12 GeV Electron Accelerator for Nuclear Physics with a 100% Duty Cycle”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH427, pp. 659-661. 
[n]	F. Zhou et al., “Emittance Growth due to the Laser Non-uniformity in a Photoinjector”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUAGB003, pp. 275-277. 
[n]	B. W. J. McNeil, D. J. Dunning, G. R. M. Robb, and N. Thompson, “FELO: A One-Dimensional Time-Dependent FEL Oscillator Code”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH011, pp. 59-62. 
[n]	L. Bartelson et al., “A Second Long Pulse Modulator for TESLA Using IGBTs”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP048G, pp. 2585-2587. 
[n]	G. L. Sabbi, “Magnet Development for LARP”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRXKI02, pp. 3737-3737. 
[n]	S. Assadi, “SNS Transverse and Longitudinal Laser Profile Monitors Design, Implementation and Results”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH156, pp. 3161-3163. 
[n]	T. A. Enegren, J. Griffin, R. Poirier, W. R. Smythe, H. A. Thiessen, and L. Walling, “Higher-Order Mode Damping in KAON Factory RF Cavities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 196-199. 
[n]	M. El Khaldi, M. Alkadi, C. Bruni, L. Garolfi, A. Gonnin, and H. Monard, “Design Study of High Gradient Compact S-band TW Accelerating Structure for the ThomX LINAC Upgrade”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2807-2810. doi:10.18429/JACoW-IPAC2019-WEPRB008
[n]	B. C. Kuske and M. Abo-Bakr, “Optics Development and Trajectory Tuning of BERLinPro at Low Energies”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 153-155. doi:10.18429/JACoW-IPAC2017-MOPAB033
[n]	A. Browman, L. N. Hand, G. Rouse, and T. Tso, “A Slow Extracted Beam for the Cornell 2 Ge V Synchrotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 260-262. 
[n]	N. P. Abreu, R. H. A. Farias, and P. F. Tavares, “RF Phase Modulation at the LNLS Electron Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP020, pp. 1686-1688. 
[n]	P. Kuske, H. -G Hoberg, J. Machado, R. Maier, and A. Schiele, “Beam Diagnostics Using Variations of Local Magnetic Fields”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1214-1217. 
[n]	A. Feschenko et al., “Longitudinal Beam Parameters Study in the SNS Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOAAB01, pp. 2608-2610. 
[n]	A. N. Zelenski et al., “Optically-Pumped Polarized H- Ion Sources for RHIC and HERA Colliders”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MODR6, pp. 106-108. 
[n]	A. Kisiel et al., “Diagnostic Beamlines at the Solaris Storage Ring”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 366-368. doi:10.18429/JACoW-IBIC2019-TUPP026
[n]	D. Oshatz, A. DeMello, L. Doolittle, P. Luft, J. W. Staples, and A. Zachoszcz, “Mechanical Design of the SNS MEBT”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH152, pp. 1574-1576. 
[n]	J. T. Weir et al., “ETA-II Experiments for Determining Advanced Radiographic Capabilities of Induction Linacs”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V022, pp. 1260-1262. 
[n]	D. Golob, U. Platise, M. Plesko, and M. Sekoranja, “I/O Cards with Built-in Linux and TCP/IP Become Turnkey Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE615, pp. XX-XX. 
[n]	J. B. Jeanneret, E. Adli, A. Latina, G. Rumolo, D. Schulte, and R. Tomas, “Beam Dynamics Issues in the CLIC Long Transfer Line”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC018, pp. 3017-3019. 
[n]	D. Grier, E. Jensen, R. Losito, and A. Mitra, “The PS 80 MHz Cavities”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02H, pp. 1773-1775. 
[n]	B. D. Muratori and Y. M. Saveliev, “ALICE (ERLP) Injector Design”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC058, pp. 196-198. 
[n]	R. Maier, B. Seligmann, and H. J. Stein, “Electron Cooling in COSY-Juelich”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1580-1583. 
[n]	M. D. Cole et al., “Fabrication and Final Field Tuning of Copper Cavity Models for a High-Current SRF ERL at 703.75 MHz”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT091, pp. 4257-4259. 
[n]	D. T. Blackfield, Y.-J. Chen, J. R. Harris, S. D. Nelson, A. Paul, and B. R. Poole, “Injector Particle Simulation and Beam Transport in a Compact Linear Proton Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS057, pp. 1781-1783. 
[n]	X. Chang et al., “Recent Progress on the Diamond Amplified Photo-cathode Experiment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEOCC04, pp. 2044-2046. 
[n]	R. Olsen, “Digital Trigger Generator for a 24-Pulse SCR Bridge with Controllable, Line-Commutated Free-Wheeling Thyristors”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2344-2347. 
[n]	D. L. Hall, M. Ge, J. J. Kaufman, M. Liepe, and R. D. Porter, “Impact of Cooldown Procedure and Ambient Magnetic Field on the Quality Factor of State-of-the-Art Nb3Sn Single-Cell ILC Cavities”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 215-217. doi:10.18429/JACoW-NAPAC2016-MOPOB63
[n]	I. Sato and Y. L. Wang, “Study of High Efficiency Linear Accelerator Structure”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO449, pp. 183-185. 
[n]	L. Arnaudon, S. Myers, and R. Olsen, “Commissioning of the LEP Transverse Feedback System”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 901-904. 
[n]	G. E. Leyh, A. R. Donaldson, and L. T. Jackson, “A Multi-Channel Corrector Magnet Controller”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPP07, pp. 1976-1978. 
[n]	H. A. Thiessen, “A Review of Kaon Factory Proposals”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1601-1607. 
[n]	E. Bouquerel et al., “The ESSnuSB Target Station”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3831-3834. doi:10.18429/JACoW-IPAC2019-THPRB013
[n]	D. J. Dunning, J. A. Clarke, B. W. J. McNeil, D. J. Scott, and N. Thompson, “First Tolerance Studies for the 4GLS FEL Sources”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH057, pp. 462-465. 
[n]	J. A. Holmes, S. M. Cousineau, S. Henderson, and M. A. Plum, “Simulations for SNS Ring Commissioning”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH130, pp. 348-350. 
[n]	T. Roggen, P. Baudrenghien, and R. Calaga, “A Higher Harmonic Cavity at 800 MHz for HL-LHC”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB017, pp. 1100-1104. 
[n]	J. Karn, G. Biallas, A. Guerra, and L. Harwood, “Magnetic Measurements of the Prototype Dipole for the IR-FEL at the Thomas Jefferson National Accelerator Facility”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P045, pp. 3333-3335. 
[n]	D. Baros, J. D. Sedillo, and H. A. Watkins, “Bridging the Gap; Updating LANSCE Digitizers”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 822-824. doi:10.18429/JACoW-IBIC2016-WEPG74
[n]	R. Perin, “Superconducting Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE02, pp. 1282-1287. 
[n]	L. Zhang, M. Lesourd, and T. Lewis, “Vibration Damping Systems for Magnet Girder Assembly at the ESRF”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH109, pp. 1465-1467. 
[n]	W. K. van Asselt and Y. Y. Lee, “Beam Induced Heating of Ferrite Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 881-884. 
[n]	H. Friedsam, “A New Accelerator Alignment Concept using Laser Trackers”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2570-2573. 
[n]	O. Dressler, M. V. Hartrott, and N. Hauge, “Determination of the Magnetic Characteristics in the Injection Septum for the Metrology Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC026, pp. 1773-1775. 
[n]	D. Huang and Q. Gu, “Study of the Microbunching Instablity in the LINAC of the Future Shanghai Soft X-ray FEL Facility (SXFEL)”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPB09, pp. 579-581. 
[n]	M. Abo-Bakr, R. Follath, and A. Meseck, “Coherence Improvement of the BESSY HGHG FEL Radiation”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP001, pp. XX-XX. 
[n]	L. Dietl, K. Rieger, and U. Trinks, “Lead Alloys for Superconducting Cavities”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3605-3607. 
[n]	Y. Suetsugu, Y. Hori, K. Kanazawa, M. Kobayashi, Y. Tanimoto, and Y.-J. Hsu, “Reduction of the Photoelectron Yield from a Copper Beam Chamber by Saw-Tooth Machining”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH041, pp. 2177-2179. 
[n]	D. Brandt, G. L. Sabbi, and B. W. Zotter, “Simulation of Stability Thresholds in LEP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1066-1069. 
[n]	S. Verd??-Andr?®s et al., “Cryogenic RF Performance of Double-Quarter Wave Cavities Equipped with HOM Filters”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3043-3046. doi:10.18429/JACoW-IPAC2019-WEPRB098
[n]	B. C. Kuske, M. Abo-Bakr, and A. Meseck, “Impact of Realistic Bunch Profiles and Timing Jitter on the Output of the BESSY Low Energy FEL Line”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP005, pp. XX-XX. 
[n]	R. Perin, “State of the LHC Main Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P012, pp. 3371-3373. 
[n]	M. Woodley, J. Nelson, M. C. Ross, and A. Wolski, “Analysis of KEK-ATF Optics and Coupling Using LOCO”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT142, pp. 872-874. 
[n]	G. Biallas et al., “Making Dipoles to Spectrometer Quality using Adjustments during Measurement”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP145, pp. 3306-3308. 
[n]	B. W. J. McNeil, “How an FEL Works”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper MOTUI1, pp. 182-182. 
[n]	H. S. Kim, Y.-S. Cho, J.-H. Jang, H.-J. Kwon, and B.-S. Park, “Fabrication Status of the PEFP DTL II”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP025, pp. 3425-3427. 
[n]	G. E. McMichael and B. G. Chidley, “Beam Dynamics Studies of High Current RFQ and DTL Tanks”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper E01, pp. 149-152. 
[n]	J. Henderson, D. J. Dunning, and B. W. J. McNeil, “Beam Quality and Transport Stability Simulations in Echo Enabled Harmonic Generation”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper MOPB32, pp. 99-102. 
[n]	U. Trinks et al., “The Superconducting Separated Orbit Cyclotron Tritron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2721-2724. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search