Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Yu et al., “The X-Band Linear Compression System in Dalian Coherent Light Source”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 625-628. doi:10.18429/JACoW-FEL2019-THP015
[n] R. A. Margraf, J. P. MacArthur, G. Marcus, and Z. Huang, “Microbunch Rotation as an Outcoupling Mechanism for Cavity-based X-Ray Free Electron Lasers”, in Proc. IPAC'20, Caen, France, May 2020, pp. 35. doi:10.18429/JACoW-IPAC2020-WEVIR03
[n] J. Palkovic et al., “Measurements on a Gabor Lens for Neutralizing and Focusing a 30 keV Proton Beam”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-53, pp. 179-181.
[n] N. Dikansky, V. Parkhomchuk, A. Skrinsky, and V. Yakimenko, “Novosibirsk Tau-Charm Factory Design Study”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR11, pp. 819-821.
[n] J. H. Yue et al., “Consideration and Design of HEPS Beam Instrumentation”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper THPP31, unpublished.
[n] K. W. Shepard and J. W. Kim, “A Low-charge-state Injector Linac for ATLAS”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPR05, pp. 1128-1130.
[n] P. G. Bricault, D. Joffe, and H. R. Schneider, “RFQ Cold Model Studies”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPR02, pp. 1122-1124.
[n] P. J. Chou et al., “RF Measurements of a Traveling-Wave Muffin-Tin Accelerating Structure at 90 GHz”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V012, pp. 672-674.
[n] Y. Zhang and P. Chu, “Drifting Beam Application for SNS Superconducting Cavity Setting”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP084, pp. 454-456.
[n] C. Mitsuda et al., “Newly Development of Ceramics Chamber with Integrated Pulsed Magnet for Super-Narrow Bore in KEK-PF”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4524-4527. doi:10.18429/JACoW-IPAC2021-FRXB04
[n] V. Guidi et al., “Axial Channeling of Positively Charged High-Energy Proton Beams”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP092, pp. 3010-3012.
[n] T. K. D. Kulenkampff et al., “Extraction Commissioning for MedAustron Proton Operation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1327-1329. doi:10.18429/JACoW-IPAC2016-TUPMR036
[n] H. Ono, J. Miyamatsu, M. Washio, H. Iijima, and K. Sakaue, “Study on CsKSb Photocathode for the RF Electron Gun”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1456-1459. doi:10.18429/JACoW-IPAC2017-TUPAB059
[n] S. Machida, Y. Mori, Y. Ishi, and S. Shibuya, “Design and Beam Dynamics Issues of the JHF Synchrotrons”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D003, pp. 381-383.
[n] Y. Nakanishi et al., “Measurement of the Beam Response to Quadrupole Kick by Using Stripline Pickup Monitor at J-PARC Main Ring”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 604-607. doi:10.18429/JACoW-IBIC2016-WECL03
[n] P. G. Bricault and H. R. Schneider, “Simulation of the TRIUMF Split-Ring 4-Rod RFQ with MAFIA”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPR03, pp. 1125-1127.
[n] M. Hager and M. Regodic, “A Modular Software Architecture for Applications that Support Accelerator Commissioning at MedAustron”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 938-941. doi:10.18429/JACoW-ICALEPCS2015-WEPGF101
[n] T. Houck, M. Garcia, and S. Sampayan, “Faraday Cup Measurements of the Plasma Plume Produced at an X-ray Converter”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4102, pp. 311-313.
[n] R. Maier et al., “Invited Paper: Commissioning of the Cooler Synchrotron COSY”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper F-01, pp. 338-344.
[n] J. Vlogaert, “ACOL Dipoles”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1520-1523.
[n] E. M. Laziev, B. Grigoryan, V. M. Tsakanov, M. Movsisyan, and D. L. Oganesyan, “Autocorrelation Function and Power Spectrum of a Train of Quasiperiodic Sequence of Pulses”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC144, pp. 415-417.
[n] P. Meliga, E. Bressi, G. Debernardi, L. Falbo, and C. Priano, “Design and commissioning of the RF-KO extraction at CNAO”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 162-164. doi:10.18429/JACoW-IPAC2023-MOPA060
[n] P. S. Bowling and S. K. Brown, “The Separation of Control Variables in an H- Ion Source”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1009-1012.
[n] H. Burkhardt, J. Miles, J. Rothberg, and G. von Holtey, “Experience with Particle Backgrounds at LEP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 451-454.
[n] T. Tanabe et al., “Electron Cooling Experiments at TARN II”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1571-1574.
[n] P. A. Smith et al., “Rf Measurement and Characterisation of European Spallation Source Cavities at UKRI-STFC Daresbury Laboratory and DESY”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 212-214. doi:10.18429/JACoW-LINAC2022-MOPOGE25
[n] L. Bandiera et al., “Study and optimization of an hybrid crystal-based positron source for the FCC-ee”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA085, unpublished.
[n] R. D. Kohaupt, “Multi-Bunch Systems at DESY”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ32, pp. 2741-2741.
[n] V. Agoritsas, “A Sealed Metal Argon Ionization Chamber (Argonion)”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2243-2246.
[n] T. Kamitani et al., “SuperKEKB Positron Source Construction Status”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 579-581. doi:10.18429/JACoW-IPAC2014-MOPRI004
[n] L. E. Medina Medrano, G. Arduini, and R. Tomas, “Studies on Luminous Region, Pile-up and Performance for HL-LHC Scenarios”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1908-1911. doi:10.18429/JACoW-IPAC2017-TUPIK089
[n] R. Kulaga et al., “Large-Scale Upgrade Campaigns of SCADA Systems at CERN - Organisation, Tools and Lessons Learned”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1384-1388. doi:10.18429/JACoW-ICALEPCS2017-THPHA021
[n] H. K. Bechtold et al., “Performance Tests of the Photon Monochromator for Self-seeding at FLASH”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper WEBAU03, pp. 306-309.
[n] B. Groussin, M. Martinez Calderon, E. Granados, B. Marsh, and R. Rossel, “Copper surface treatment with deep UV ultrafast laser for improved photocathode photoemissive properties”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1350-1353. doi:10.18429/JACoW-IPAC2023-TUPA001
[n] D. R. Walz, E. Lewandowski, and A. McFarlane, “Beam Dumps, Stoppers and Faraday Cups at the SLC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 551-553.
[n] X. R. Resende et al., “Study of a Pulsed Sextupole Magnet Injection System for LNLS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC139, pp. 3212-3214.
[n] F. Saito, “APPLICATION OF AN ELECTRO-CHEMICAL PROCEDURE TO THE PRODUCTION OF 18F-PHARMACEUTICALS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P01, pp. XX-XX.
[n] D. Angal-Kalinin et al., “ALICE ERL Intra-train Variation Investigation using Bunch-by-bunch BPMs”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA061, pp. 2256-2258.
[n] E.-S. Kim, “Accelerator Physics Issues at the 2.5 GeV PLS Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE045, pp. 2854-2856.
[n] J. Gao et al., “ILC 1.3 GHz Superconducting RF Technology Development Program at IHEP”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP038, pp. 906-908.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Yu et al., “The X-Band Linear Compression System in Dalian Coherent Light Source”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 625-628.
- R. A. Margraf, J. P. MacArthur, G. Marcus, and Z. Huang, “Microbunch Rotation as an Outcoupling Mechanism for Cavity-based X-Ray Free Electron Lasers”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, pp. 35.
- J. Palkovic et al., “Measurements on a Gabor Lens for Neutralizing and Focusing a 30 keV Proton Beam”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-53, pp. 179-181.
- N. Dikansky, V. Parkhomchuk, A. Skrinsky, and V. Yakimenko, “Novosibirsk Tau-Charm Factory Design Study”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR11, pp. 819-821.
- J. H. Yue et al., “Consideration and Design of HEPS Beam Instrumentation”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper THPP31, unpublished.
- K. W. Shepard and J. W. Kim, “A Low-charge-state Injector Linac for ATLAS”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPR05, pp. 1128-1130.
- P. G. Bricault, D. Joffe, and H. R. Schneider, “RFQ Cold Model Studies”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPR02, pp. 1122-1124.
- P. J. Chou et al., “RF Measurements of a Traveling-Wave Muffin-Tin Accelerating Structure at 90 GHz”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7V012, pp. 672-674.
- Y. Zhang and P. Chu, “Drifting Beam Application for SNS Superconducting Cavity Setting”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP084, pp. 454-456.
- C. Mitsuda et al., “Newly Development of Ceramics Chamber with Integrated Pulsed Magnet for Super-Narrow Bore in KEK-PF”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4524-4527.
- V. Guidi et al., “Axial Channeling of Positively Charged High-Energy Proton Beams”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP092, pp. 3010-3012.
- T. K. D. Kulenkampff et al., “Extraction Commissioning for MedAustron Proton Operation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1327-1329.
- H. Ono, J. Miyamatsu, M. Washio, H. Iijima, and K. Sakaue, “Study on CsKSb Photocathode for the RF Electron Gun”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1456-1459.
- S. Machida, Y. Mori, Y. Ishi, and S. Shibuya, “Design and Beam Dynamics Issues of the JHF Synchrotrons”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D003, pp. 381-383.
- Y. Nakanishi et al., “Measurement of the Beam Response to Quadrupole Kick by Using Stripline Pickup Monitor at J-PARC Main Ring”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 604-607.
- P. G. Bricault and H. R. Schneider, “Simulation of the TRIUMF Split-Ring 4-Rod RFQ with MAFIA”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPR03, pp. 1125-1127.
- M. Hager and M. Regodic, “A Modular Software Architecture for Applications that Support Accelerator Commissioning at MedAustron”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 938-941.
- T. Houck, M. Garcia, and S. Sampayan, “Faraday Cup Measurements of the Plasma Plume Produced at an X-ray Converter”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4102, pp. 311-313.
- R. Maier et al., “Invited Paper: Commissioning of the Cooler Synchrotron COSY”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper F-01, pp. 338-344.
- J. Vlogaert, “ACOL Dipoles”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1520-1523.
- E. M. Laziev, B. Grigoryan, V. M. Tsakanov, M. Movsisyan, and D. L. Oganesyan, “Autocorrelation Function and Power Spectrum of a Train of Quasiperiodic Sequence of Pulses”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC144, pp. 415-417.
- P. Meliga, E. Bressi, G. Debernardi, L. Falbo, and C. Priano, “Design and commissioning of the RF-KO extraction at CNAO”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA060, pp. 162-164.
- P. S. Bowling and S. K. Brown, “The Separation of Control Variables in an H- Ion Source”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1009-1012.
- H. Burkhardt, J. Miles, J. Rothberg, and G. von Holtey, “Experience with Particle Backgrounds at LEP”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 451-454.
- T. Tanabe et al., “Electron Cooling Experiments at TARN II”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1571-1574.
- P. A. Smith et al., “Rf Measurement and Characterisation of European Spallation Source Cavities at UKRI-STFC Daresbury Laboratory and DESY”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 212-214.
- L. Bandiera et al., “Study and optimization of an hybrid crystal-based positron source for the FCC-ee”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA085, unpublished.
- R. D. Kohaupt, “Multi-Bunch Systems at DESY”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ32, pp. 2741-2741.
- V. Agoritsas, “A Sealed Metal Argon Ionization Chamber (Argonion)”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2243-2246.
- T. Kamitani et al., “SuperKEKB Positron Source Construction Status”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 579-581.
- L. E. Medina Medrano, G. Arduini, and R. Tomas, “Studies on Luminous Region, Pile-up and Performance for HL-LHC Scenarios”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1908-1911.
- R. Kulaga et al., “Large-Scale Upgrade Campaigns of SCADA Systems at CERN - Organisation, Tools and Lessons Learned”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1384-1388.
- H. K. Bechtold et al., “Performance Tests of the Photon Monochromator for Self-seeding at FLASH”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper WEBAU03, pp. 306-309.
- B. Groussin, M. Martinez Calderon, E. Granados, B. Marsh, and R. Rossel, “Copper surface treatment with deep UV ultrafast laser for improved photocathode photoemissive properties”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA001, pp. 1350-1353.
- D. R. Walz, E. Lewandowski, and A. McFarlane, “Beam Dumps, Stoppers and Faraday Cups at the SLC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 551-553.
- X. R. Resende et al., “Study of a Pulsed Sextupole Magnet Injection System for LNLS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC139, pp. 3212-3214.
- F. Saito, “APPLICATION OF AN ELECTRO-CHEMICAL PROCEDURE TO THE PRODUCTION OF 18F-PHARMACEUTICALS”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19P01, pp. XX-XX.
- D. Angal-Kalinin et al., “ALICE ERL Intra-train Variation Investigation using Bunch-by-bunch BPMs”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA061, pp. 2256-2258.
- E.-S. Kim, “Accelerator Physics Issues at the 2.5 GeV PLS Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE045, pp. 2854-2856.
- J. Gao et al., “ILC 1.3 GHz Superconducting RF Technology Development Program at IHEP”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP038, pp. 906-908.
Back to search