JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. Kwon et al., “A New Digital Feedback and Feedforward Controller for Cavity Field Control of the LANSCE Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2277-2280. doi:10.18429/JACoW-IPAC2018-WEPAL046
[n]	D. Rees et al., “LANSCE RF System Refurbishment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS029, pp. 2400-2402. 
[n]	S. Kwon, M. S. Prokop, and A. Scheinker, “Robust Control of a Two-Input Two-Output (TITO) Multistate Cavity RF System ith Mismatched Uncertainty”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC090, pp. 3494-3496. 
[n]	W. J. Schneider, P. Kneisel, and C. H. Rode, “Gradient Optimization for SC CW Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB063, pp. 2863-2865. 
[n]	R. Alvarez, R. Borghi, and J. Weaver, “Precision Phase Adjustment of a Linear Accelerator High Power Waveguide Feed Network”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 39-44. 
[n]	S. Singh, J. A. Gore, S. Kulkarni, and P. Singh, “Control System for BARC-TIFR Pelletron”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCA04, pp. 251-253. 
[n]	A. Scheinker et al., “Preliminary Study of Advanced LLRF Controls at LANSCE for Beam Loading Compensation in the MaRIE X-FEL”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 411-413. doi:10.18429/JACoW-NAPAC2016-TUPOA63
[n]	J. Rossbach, “New Linac Based Free Electron Laser Projects using Bright Electron Beams”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TU103, pp. 275-282. 
[n]	G. Cavallari, E. Chiaveri, E. Haebel, Ph. Legendre, and W. Weingarten, “Coupler Developments at CERN”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87E07, pp. XX-XX. 
[n]	J. Rossbach, “The TESLA Free Electron Laser -- Concept and Status”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU2001, pp. 357-361. 
[n]	V. A. Moiseev, “Simulation of the Transverse Microwave Instability of an Intense Ion Beam”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP11F, pp. 1218-1220. 
[n]	J. Resta-L??pez, J. Alabau-Gonzalvo, R. Apsimon, P. Burrows, G. B. Christian, and B. Constance, “Simulation Study of Intra-train Feedback Systems for Nanometer Beam Stabilization at ATF2”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB039, pp. 2773-2775. 
[n]	J. A. Gore et al., “A FPGA Based High Speed Data Acquisition Card”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCC02, pp. 271-273. 
[n]	S. Kwon, J. Davis, M. T. Lynch, M. S. Prokop, S. Ruggles, and P. A. Torrez, “Gain Scheduled Neural Network Tuned PI Feedback Control System for the LANSCE Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS022, pp. 2379-2381. 
[n]	Y. Ivanyushenkov et al., “Development of a Full Scale Superconducting Undulator Module for the ILC Positron Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN070, pp. 2862-2864. 
[n]	M. S. Prokop, S. Kwon, S. Ruggles, and P. A. Torrez, “LANSCE-R Low Level RF Control System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS025, pp. 2388-2390. 
[n]	R. C. Gupta et al., “Magnetic Design of e-lens Solenoid and Corrector System for RHIC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP164, pp. 1130-1132. 
[n]	P. K. Roy et al., “Non-Intercepting Diagnostic for the HIF Neutralized Transport Experiment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG016, pp. 2625-2627. 
[n]	J. S. Kolski et al., “Diagnostic Pulse for Single-particle-like Beam Position Measurements During Accumulation/Production Mode in the Los Alamos Proton Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP097, pp. 3960-3962. 
[n]	J. Rochford et al., “The Development of a Superconducting Undulator for the ILC Positron Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE2RAI01, pp. 1839-1843. 
[n]	H. Witte, M. Anerella, J. S. Berg, P. Kovach, and M. L. Lopes, “Rapid Cycling Dipole Magnet”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEODA2, pp. 762-764. 
[n]	L. J. Jenner et al., “A Study of Mechanical and Magnetic Issues for a Prototype Positron Source Target”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP072, pp. 715-717. 
[n]	H. D. Schwarz, K. Fant, J. G. Judkins, M. Neubauer, and R. A. Rimmer, “Development of a Movable Plunger Tuner for the High-Power RF Cavity for the PEP-II B Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P030, pp. 3039-3041. 
[n]	V. A. Moiseev and P. N. Ostroumov, “Code to Study the High Intensity Beam Dynamics in the Ion Linear Accelerators”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP10F, pp. 1216-1217. 
[n]	B. N. Kosciuk, C. Hetzel, J. A. Kierstead, V. Ravindranath, S. K. Sharma, and O. Singh, “Development and Testing of Carbon Fiber Vacuum Chamber Supports for NSLS-II”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP286, pp. 1364-1366. 
[n]	K. Halbach, E. Hoyer, S. Marks, D. Plate, and D. Shuman, “CSEM-Steel Hybrid Wiggler/Undulator Magnetic Field Studies”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3640-3643. 
[n]	B. Constance, R. Corsini, D. Gamba, and P. K. Skowronski, “Recent Improvements to the Control of the CTF3 High-Current Drive Beam”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB003, pp. 180-182. 
[n]	K. C. Liao, O. Brunner, E. Ciapala, T. Junginger, and W. Weingarten, “Second Sound Measurement Using SMD Resistors to Simulate Quench Locations on the 704 MHz Single-cell Cavity at CERN”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC030, pp. 2269-2271. 
[n]	S. Khan et al., “Layout of a Femtosecond X-Ray Source at BESSY II”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB005, pp. 836-838. 
[n]	P. Burrows et al., “Latest Beam Test Results from ATF2 with the Font ILC Prototype Intra-train Beam Feedback Systems”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB044, pp. 2788-2790. 
[n]	Y. Lu et al., “Development of an octupole ceramics chamber with integrated pulsed magnet for beam injection”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3639-3642. doi:10.18429/JACoW-IPAC2023-WEPM038

For LaTeX

Use Complete Form

For BibTeX

References

Back to search