Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Y. Tang et al., “EPICS Software Development for SNS VME Based Timing and RTDL System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP068, pp. XX-XX.
[n] E. Matias, “Friday Closeout Presentation”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper FRTA01, pp. 219-219.
[n] K. Abrahamsson et al., “Performance of CRYRING with Improved Electron Cooling”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 380-385.
[n] A. Guerrero, J. J. Gras, J-L. Nougaret, M. Ludwig, M. Arruat, and S. Jackson, “CERN Front-End Software Architecture for Accelerator Controls”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE612, pp. XX-XX.
[n] L. G. Ratner et al., “Commissioning the Polarized Beam in the AGS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1656-1659.
[n] Y. Makdisi et al., “Acceleration of Polarized H- in the BNL 200 MeV Linac”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3166-3169.
[n] P. J. Chou, G. B. Bowden, M. R. Copeland, H. Henke, A. Menegat, and R. H. Siemann, “Design and Fabrication of a Traveling-Wave Muffin-Tin Accelerating Structure at 90 GHz”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5B011, pp. 464-466.
[n] C. M. Bhat et al., “Magnetic Field Measurements of the Main Injector Sextupole Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P007, pp. 3242-3244.
[n] S. Pei, C. Adolphsen, J. Carwardine, and N. J. Walker, “Flash Beam-Off RF Measurements and Analyses”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP097, pp. 2240-2242.
[n] F. Z. Chen, L. W. Lai, Y. B. Leng, N. Zhang, and Y. B. Yan, “Development of a Digital Beam Signal Processor Test System Based on MATLAB and SCPI”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 329-331. doi:10.18429/JACoW-IPAC2017-MOPAB089
[n] D. T. Palmer et al., “Microwave Measurements of the BNL/SLAC/UCLA 1.6 Cell Photocathode RF Gun”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB13, pp. 982-984.
[n] R. S. Amin et al., “A Preliminary Report from Louisiana State University CAMD Storage Ring Operating with an 11-pole 7.5 T Wiggler”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1682-1685. doi:10.18429/JACoW-IPAC2015-TUPJE034
[n] Y. Luo et al., “APS storage ring waveguide layout study for solid state amplifier upgrade”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2026-2029. doi:10.18429/JACoW-IPAC2024-WEPC26
[n] V. Dokutovich, A. D. Chernyakin, D. N. Pureskin, and D. V. Senkov, “The Power Supply of Pulse Magnets With Output Current up to 10 kA”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 330-332. doi:10.18429/JACoW-RUPAC2018-WEPSB21
[n] T. V. Salikova, M. Petrichenkov, A. V. Repkov, O. A. Shevchenko, and N. Vinokurov, “Radiation Monitoring at Novosibirsk FEL”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper PS13, pp. 106-107.
[n] T. L. Lavine, R. H. Miller, P. L. Morton, and R. D. Ruth, “Transient Analysis of Multicavity Klystrons”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 126-129.
[n] D. Saez de Jauregui et al., “Possible Superconducting Insertion Devices with Period Length Doubling for Beamlines of Third Generation Light Sources”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC161, pp. 3269-3271.
[n] A. V. Smirnov et al., “A Table-Top Alpha-Magnet”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3584-3586. doi:10.18429/JACoW-IPAC2015-WEPWI042
[n] F. H. O et al., “Status of the Praseodymium Undulator with Textured Dysprosium Poles for Compact X-Ray FEL Applications”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA081, pp. 2298-2300.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Y. Tang et al., “EPICS Software Development for SNS VME Based Timing and RTDL System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP068, pp. XX-XX.
- E. Matias, “Friday Closeout Presentation”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper FRTA01, pp. 219-219.
- K. Abrahamsson et al., “Performance of CRYRING with Improved Electron Cooling”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 380-385.
- A. Guerrero, J. J. Gras, J-L. Nougaret, M. Ludwig, M. Arruat, and S. Jackson, “CERN Front-End Software Architecture for Accelerator Controls”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE612, pp. XX-XX.
- L. G. Ratner et al., “Commissioning the Polarized Beam in the AGS”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1656-1659.
- Y. Makdisi et al., “Acceleration of Polarized H- in the BNL 200 MeV Linac”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3166-3169.
- P. J. Chou, G. B. Bowden, M. R. Copeland, H. Henke, A. Menegat, and R. H. Siemann, “Design and Fabrication of a Traveling-Wave Muffin-Tin Accelerating Structure at 90 GHz”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5B011, pp. 464-466.
- C. M. Bhat et al., “Magnetic Field Measurements of the Main Injector Sextupole Magnets”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P007, pp. 3242-3244.
- S. Pei, C. Adolphsen, J. Carwardine, and N. J. Walker, “Flash Beam-Off RF Measurements and Analyses”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP097, pp. 2240-2242.
- F. Z. Chen, L. W. Lai, Y. B. Leng, N. Zhang, and Y. B. Yan, “Development of a Digital Beam Signal Processor Test System Based on MATLAB and SCPI”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 329-331.
- D. T. Palmer et al., “Microwave Measurements of the BNL/SLAC/UCLA 1.6 Cell Photocathode RF Gun”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPB13, pp. 982-984.
- R. S. Amin et al., “A Preliminary Report from Louisiana State University CAMD Storage Ring Operating with an 11-pole 7.5 T Wiggler”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1682-1685.
- Y. Luo et al., “APS storage ring waveguide layout study for solid state amplifier upgrade”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC26, pp. 2026-2029.
- V. Dokutovich, A. D. Chernyakin, D. N. Pureskin, and D. V. Senkov, “The Power Supply of Pulse Magnets With Output Current up to 10 kA”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 330-332.
- T. V. Salikova, M. Petrichenkov, A. V. Repkov, O. A. Shevchenko, and N. Vinokurov, “Radiation Monitoring at Novosibirsk FEL”, in Proc. 53th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'13), Novosibirsk, Russia, Sep. 2013, paper PS13, pp. 106-107.
- T. L. Lavine, R. H. Miller, P. L. Morton, and R. D. Ruth, “Transient Analysis of Multicavity Klystrons”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 126-129.
- D. Saez de Jauregui et al., “Possible Superconducting Insertion Devices with Period Length Doubling for Beamlines of Third Generation Light Sources”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC161, pp. 3269-3271.
- A. V. Smirnov et al., “A Table-Top Alpha-Magnet”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3584-3586.
- F. H. O et al., “Status of the Praseodymium Undulator with Textured Dysprosium Poles for Compact X-Ray FEL Applications”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA081, pp. 2298-2300.
Back to search