JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	O. Pierret et al., “Transport optimization and characterization of the 2kA AIRIX electron beam”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUC03, pp. 494-496. 
[n]	S. Glukhov et al., “Possibilities for performance enhancement of a compact TDS at FLUTE”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM087, unpublished. 
[n]	T. B. Bolin, S. Biedron, and S. Sosa, “HPC Modeling of a High-Gradient C-Band Linac for Hard X-Ray Free-Electron Lasers”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 703-705. doi:10.18429/JACoW-IPAC2022-MOPOMS029
[n]	J. C. Chang, C. Y. Liu, J. R. Chen, and M. T. Ke, “Air Temperature Analysis and Control Improvement for the Large-Scale Experimental Hall”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99908, pp. XX-XX. 
[n]	P. Lotrus et al., “Status of the GBAR control project at CERN”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 531-533. doi:10.18429/JACoW-ICALEPCS2017-TUPHA059
[n]	B. Gao, H. J. Chen, J. Chen, Y. B. Leng, K. R. Ye, and N. Zhang, “Wavefront Distortion Measurement at SSRF”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 332-334. doi:10.18429/JACoW-IPAC2017-MOPAB090
[n]	H. Zhang, J. Grillenberger, and M. Seidel, “Beam Optics Considerations for Isotope Production at the PSI Cyclotron Facility”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 95-97. doi:10.18429/JACoW-Cyclotrons2016-MOP16
[n]	Y. L. Zhang and G. Lei, “WPF Based EPICS Server and its Application in CSNS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA011, pp. 3170-3172. 
[n]	O. Bourrion, D. Tourres, and C. Vescovi, “LLRF Electronics for the CNAO Synchrotron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC139, pp. 1392-1394. 
[n]	T. Shintomi, M. Masuda, and S. Matsumoto, “New Method to Scale Down an Operation of a Large Accelerator Power Supply”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1361-1364. 
[n]	G. Sattonnay, V. Baglin, S. Bilgen, and B. Mercier, “DYVACS (DYnamic VACuum Simulation) Code:  Calculation of Gas Density Profiles in Presence of Electron Cloud”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1244-1247. doi:10.18429/JACoW-IPAC2019-TUPMP007
[n]	A. V. Tiunov et al., “Variants of Optics Schemes and Accelerator Configurations for Athens Microtron: Preliminary Considerations”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ01, pp. 3285-3287. 
[n]	G. Papotti, T. Bohl, F. Follin, and U. Wehrle, “Longitudinal Beam Measurements at the LHC: The LHC Beam Quality Monitor”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ022, pp. 1852-1854. 
[n]	S. Brandenburg, S. Kopecky, M. Versteegh, S. Gal?¿s, J. Guillot, and H. Laurent, “Acceleration of Low-Intensity Triton Beams with the AGOR Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P1-01, pp. XX-XX. 
[n]	S. Cheban, D. Passarelli, and V. Roger, “Design and Manufacturing Challenges of the SSR1 Current Leads for PIP-II”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 329-331. doi:10.18429/JACoW-SRF2019-MOP101
[n]	S. Dat?® et al., “Operation Status of the SPring-8 Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A05, pp. 672-674. 
[n]	V. N. Litvinenko, S. F. Mikhailov, O. A. Shevchenko, and Y. Wu, “Project for Generation of Femtosecond X-ray Beams from the Duke Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH071, pp. 2614-2616. 
[n]	W. Vinzenz, W. Gutowski, G. Hutter, and B. Rossa, “Status of the 36 MHz RF-System for the High-Current-Injector at GSI”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4070, pp. 219-221. 
[n]	U. Dorda et al., “Optimized Beam Optics Design of the MINERVA/MYRRHA Superconducting Proton Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 337-340. doi:10.18429/JACoW-LINAC2022-TUPOJO03
[n]	S. Mazzoni et al., “A New Luminosity Monitor for the LHC Run 3”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 163-167. doi:10.18429/JACoW-IBIC2022-MOP45
[n]	N. Mokhov and J. Strait, “Optimization of the LHC Interaction Region with Respect to Beam-induced Energy Deposition”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP028G, pp. 386-388. 
[n]	Y. Wang et al., “Status of PNC High Power CW Electron Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E201, pp. 289-291. 
[n]	A. Flint, E. Echeverria, A. Galdi, N. Gonzalez, J. Maxson, and C. Pennington, “Synthesis of efficient ordered sodium potassium antimonide photocathodes via molecular beam epitaxy”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS018, unpublished. 
[n]	N. Gonzalez, L. Aballe, A. Carballedo, C. Colldelram, and M. Foerster, “A New High Precision, Fully Motorized 6-DoF Sample Stage for the ALBA PEEM Endstation”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 368-370. doi:10.18429/JACoW-MEDSI2018-THPH15
[n]	S. Berlik and H. Ehrlichmann, “Adaptive Fuzzy Control for Transfer Channels in Particle Accelerators”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD18, pp. 178-180. 
[n]	J. Cuperus, F. Fabiani, and J. Nuttall, “The Beam Diagnostics System, Serving the Serpukhov Fast Ejection”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 523-528. 
[n]	R. Gavaggio, M. Steffensen, and P. M. Strubin, “Using Models to allow for Object Oriented Programming of the Vacuum Control Systems”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1824-1827. 
[n]	T. Shintomi et al., “The Construction and Test Results of a 10T Dipole Magnet”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3719-3722. 
[n]	H. Gaiser and D. Boehne, “Copper Plating of Small Areas in Large Cavities”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3002-3004. 
[n]	J. R. Delayen and K. W. Shepard, “First Tests of a Superconducting RFQ Structure”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO413, pp. 76-78. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search