Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Jiang, H. B. Chen, J. Shi, and P. Wang, “A C-band Deflecting Cavity Design for High-precision Bunch Length Measurement”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2948-2951. doi:10.18429/JACoW-IPAC2015-WEPMN014
[n] T. Spangenberg, K. Cerff, W. Mexner, and V. Kaiser, “TANGO Integration of a SIMATIC WinCC Open Architecture SCADA System at ANKA”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKN020, pp. 749-751.
[n] F. Osswald, A. Khouaja, and M. Rousseau, “A Secondary Radioactive Beam Line for the SPIRAL 2 Project: First Step, the Design Study”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper F-01, pp. 346-349.
[n] C. Carter, J. Fopma, G. Gelato, L. Magnani, P. Odier, and K. Schindl, “Adapting the CERN PS Booster to Oxygen Acceleration”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 526-529.
[n] T. Hoffmann, H. Bräuning, R. N. Geißler, and T. Milosic, “Status of the MicroTCA Based Beam Instrumentation DAQ Systems at GSI and FAIR”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 239-243. doi:10.18429/JACoW-ICALEPCS2023-MO4AO07
[n] H. K. Jeong, T. Lee, and M. Yoon, “Measurement of Beta and Dispersion Functions in the PLS Storage ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP092G, pp. 1420-1422.
[n] U. Bartz and A. Schempp, “A CW RFQ Prototype”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS034, pp. 2559-2561.
[n] D. A. Pepler et al., “The 10 Petawatt Upgrade Proposal For The Vulcan High-Power Laser”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP083, pp. 272-274.
[n] M. Maxouti et al., “Three-stage simulation for the development of an ion-acoustic dose-deposition mapping system for LhARA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4714-4717. doi:10.18429/JACoW-IPAC2023-THPL106
[n] M. Crane, R. Mackenzie, D. Millsom, and M. Zelazny, “AMS: Area Message Service for SLC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1966-1969.
[n] M. Cargnelutti, S. Bassanese, G. Brajnik, S. Cleva, R. De Monte, and P. Leban, “Stability Tests with Pilot-Tone Based Elettra BPM RF Front End and Libera Electronics”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 289-292. doi:10.18429/JACoW-IBIC2018-TUPB13
[n] Y. Furukawa, T. Fujita, M. Ishii, and T. Matsumoto, “MADOCA II Interface for LabVIEW”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC129, pp. 410-412.
[n] T. Tran Ngoc and J.-P. Labrie, “Boiling Heat Transfer Process in the Design of High Power Linac Structures”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-19, pp. 90-92.
[n] P. Fatnani et al., “Status of Indus-2 Control System”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper TCO202, pp. 138-140.
[n] E. Baussan et al., “The Multi-Mega-Watt Target Station for the European Spallation Source Neutrino Super Beam”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 466-469. doi:10.18429/JACoW-IPAC2021-MOPAB132
[n] S. V. Kuzikov, J. L. Hirshfield, S. Kazakov, and M. E. Plotkin, “High-gradient Multi-mode Two-beam Accelerating Structure”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP133, pp. 2806-2808.
[n] N. S. Ginzburg, R. M. Rozental, A. Sergeev, and I. V. Zotova, “Generation of Narrow Band Short mm Wave Superradiance Pulses in a Non-uniform Planar Waveguide”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH034, pp. 397-399.
[n] R. Borghes, V. Chenda, A. Gianoncelli, and G. Kourousias, “Evolving a LabVIEW End-Station Software to a TANGO-Based Solution at the TwinMic Elettra Beamline”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 948-952. doi:10.18429/JACoW-ICALEPCS2017-TUPHA208
[n] N. I. Her et al., “Design of The Superconducting Magnet Supporting Post for KSTAR Tokamak”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH476, pp. 773-775.
[n] E. M. Bajon et al., “Commissioning of the New AGS MMPS Transformers”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP003, pp. 1538-1540.
[n] M. Zaera-Sanz, S. K?â, and A. Nordt, “Methodology, Design and Physical Deployment of Highly Dependable PLC Based Interlock Systems for ESS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1887-1889. doi:10.18429/JACoW-IPAC2017-TUPIK083
[n] J. Kim and H. Blosser, “Optimized Magnet for a 250 MeV Proton Radiotherapy Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-26, pp. XX-XX.
[n] P. H??lsmann, H.-W. Glock, H. Klein, M. Kurz, and W. F. O. M??ller, “The Effect of a Single HOM-Damper Cell within a Channel of Undamped Cells”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-06, pp. 56-58.
[n] T. Lee and M. Yoon, “Measurement and Control of Linear Coupling in the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP093G, pp. 1423-1425.
[n] M. Wendt, W. Schuette, and T. Weiland, “Estimation of the Mode Losses in Complex RF Vacuum Devices”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1722-1725.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Jiang, H. B. Chen, J. Shi, and P. Wang, “A C-band Deflecting Cavity Design for High-precision Bunch Length Measurement”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2948-2951.
- T. Spangenberg, K. Cerff, W. Mexner, and V. Kaiser, “TANGO Integration of a SIMATIC WinCC Open Architecture SCADA System at ANKA”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKN020, pp. 749-751.
- F. Osswald, A. Khouaja, and M. Rousseau, “A Secondary Radioactive Beam Line for the SPIRAL 2 Project: First Step, the Design Study”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper F-01, pp. 346-349.
- C. Carter, J. Fopma, G. Gelato, L. Magnani, P. Odier, and K. Schindl, “Adapting the CERN PS Booster to Oxygen Acceleration”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 526-529.
- T. Hoffmann, H. Bräuning, R. N. Geißler, and T. Milosic, “Status of the MicroTCA Based Beam Instrumentation DAQ Systems at GSI and FAIR”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO4AO07, pp. 239-243.
- H. K. Jeong, T. Lee, and M. Yoon, “Measurement of Beta and Dispersion Functions in the PLS Storage ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP092G, pp. 1420-1422.
- U. Bartz and A. Schempp, “A CW RFQ Prototype”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS034, pp. 2559-2561.
- D. A. Pepler et al., “The 10 Petawatt Upgrade Proposal For The Vulcan High-Power Laser”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP083, pp. 272-274.
- M. Maxouti et al., “Three-stage simulation for the development of an ion-acoustic dose-deposition mapping system for LhARA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL106, pp. 4714-4717.
- M. Crane, R. Mackenzie, D. Millsom, and M. Zelazny, “AMS: Area Message Service for SLC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1966-1969.
- M. Cargnelutti, S. Bassanese, G. Brajnik, S. Cleva, R. De Monte, and P. Leban, “Stability Tests with Pilot-Tone Based Elettra BPM RF Front End and Libera Electronics”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 289-292.
- Y. Furukawa, T. Fujita, M. Ishii, and T. Matsumoto, “MADOCA II Interface for LabVIEW”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC129, pp. 410-412.
- T. Tran Ngoc and J.-P. Labrie, “Boiling Heat Transfer Process in the Design of High Power Linac Structures”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-19, pp. 90-92.
- P. Fatnani et al., “Status of Indus-2 Control System”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper TCO202, pp. 138-140.
- E. Baussan et al., “The Multi-Mega-Watt Target Station for the European Spallation Source Neutrino Super Beam”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 466-469.
- S. V. Kuzikov, J. L. Hirshfield, S. Kazakov, and M. E. Plotkin, “High-gradient Multi-mode Two-beam Accelerating Structure”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP133, pp. 2806-2808.
- N. S. Ginzburg, R. M. Rozental, A. Sergeev, and I. V. Zotova, “Generation of Narrow Band Short mm Wave Superradiance Pulses in a Non-uniform Planar Waveguide”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH034, pp. 397-399.
- R. Borghes, V. Chenda, A. Gianoncelli, and G. Kourousias, “Evolving a LabVIEW End-Station Software to a TANGO-Based Solution at the TwinMic Elettra Beamline”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 948-952.
- N. I. Her et al., “Design of The Superconducting Magnet Supporting Post for KSTAR Tokamak”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH476, pp. 773-775.
- E. M. Bajon et al., “Commissioning of the New AGS MMPS Transformers”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP003, pp. 1538-1540.
- M. Zaera-Sanz, S. K?â, and A. Nordt, “Methodology, Design and Physical Deployment of Highly Dependable PLC Based Interlock Systems for ESS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1887-1889.
- J. Kim and H. Blosser, “Optimized Magnet for a 250 MeV Proton Radiotherapy Cyclotron”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P3-26, pp. XX-XX.
- P. H??lsmann, H.-W. Glock, H. Klein, M. Kurz, and W. F. O. M??ller, “The Effect of a Single HOM-Damper Cell within a Channel of Undamped Cells”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-06, pp. 56-58.
- T. Lee and M. Yoon, “Measurement and Control of Linear Coupling in the PLS Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP093G, pp. 1423-1425.
- M. Wendt, W. Schuette, and T. Weiland, “Estimation of the Mode Losses in Complex RF Vacuum Devices”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1722-1725.
Back to search