Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Trbojevic and E. Courant, “A Standard FODO Lattice with Adjustable Momentum Compaction”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4V003, pp. 1371-1372.
[n] N. F. Verster et al., “The Philips AVF Prototype Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63A07, pp. XX-XX.
[n] H. Lustfeld, “The Longitudinal Space Charge Problem in the High Current Linear Proton Accelerators: A New Concept”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0015, pp. 366-367.
[n] A. Zelenak, “New Program FEFI for Easer Construction and Definition of Boundaries for IGUN”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI020, pp. 1750-1752.
[n] M. Attal et al., “Commissioning of SESAME Booster”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2880-2882. doi:10.18429/JACoW-IPAC2016-WEPOW024
[n] D. J. Holder, P. D. Quinn, and N. G. Wyles, “The SRS at Daresbury Laboratory: a Eulogy to the World's First Dedicated High-energy Synchrotron Radiation Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC062, pp. 2133-2135.
[n] M. Korostelev et al., “End-to-End Beam Simulations for the New Muon G-2 Experiment at Fermilab”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2408-2411. doi:10.18429/JACoW-IPAC2016-WEPMW001
[n] K. Foraz et al., “Reliability and Intervention Management for the LHC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC012, pp. 148-150.
[n] Y. A. Fomin, V. Korchuganov, S. I. Tomin, and A. G. Valentinov, “Short Bunch Operation Mode Development at the Synchrotron Radiation Source Siberia-2”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3305-3307. doi:10.18429/JACoW-IPAC2016-THPMB034
[n] A. J. DeMello et al., “Progress on MICE RFCC Module for the MICE Experiment”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP290, pp. 1370-1372.
[n] M. Ebbeni, H. Tarawneh, and A. Thiel, “Status of Insertion Device Measurement Systems at MAX IV Laboratory”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4047-4049. doi:10.18429/JACoW-IPAC2016-THPOW046
[n] M. Nishiura, T. Katayama, T. Tanabe, A. O. Sidorin, E. M. Syresin, and I. Watanabe, “Design of the ACR Electron Cooler at RIKEN”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE084, pp. 1377-1379.
[n] H. Gaus, B. Nguyen, B. Comiskey, E. Loftin, and J. Bradley III, “Review of known extraction kickers”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3587-3590. doi:10.18429/JACoW-IPAC2024-THPR39
[n] B. Wiik, “The Status of HERA”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 351-356.
[n] P. A. Maslov, M. Komel, and K. Zagar, “Device Control Database Tool (DCDB)”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO015, pp. 191-192.
[n] T. Vinatier, C. Bruni, S. Chanc?®, and P. M. Puzo, “Length Measurement of High-brightness Electron Beam thanks to the 3-Phase Method”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3459-3461. doi:10.18429/JACoW-IPAC2014-THPME095
[n] J. Sandberg et al., “The Neutrino Horn 300 Kiloampere Pulsed Power Supply at Brookhaven National Laboratory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1743-1746.
[n] C. Y. Yoshikawa et al., “An Optimization Study of the Target Subsystem for the New g-2 Experiment”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA21, pp. 345-347.
[n] H. A. Grunder and F. B. Selph, “Operation of the Berkeley 88 - Inch Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63A02, pp. XX-XX.
[n] H. Lengeler, “Superconducting Cavities for Neutron Spallation Sources and other High Intensity Proton Accelerators”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93E02, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Trbojevic and E. Courant, “A Standard FODO Lattice with Adjustable Momentum Compaction”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4V003, pp. 1371-1372.
- N. F. Verster et al., “The Philips AVF Prototype Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63A07, pp. XX-XX.
- H. Lustfeld, “The Longitudinal Space Charge Problem in the High Current Linear Proton Accelerators: A New Concept”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0015, pp. 366-367.
- A. Zelenak, “New Program FEFI for Easer Construction and Definition of Boundaries for IGUN”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI020, pp. 1750-1752.
- M. Attal et al., “Commissioning of SESAME Booster”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2880-2882.
- D. J. Holder, P. D. Quinn, and N. G. Wyles, “The SRS at Daresbury Laboratory: a Eulogy to the World's First Dedicated High-energy Synchrotron Radiation Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC062, pp. 2133-2135.
- M. Korostelev et al., “End-to-End Beam Simulations for the New Muon G-2 Experiment at Fermilab”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2408-2411.
- K. Foraz et al., “Reliability and Intervention Management for the LHC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC012, pp. 148-150.
- Y. A. Fomin, V. Korchuganov, S. I. Tomin, and A. G. Valentinov, “Short Bunch Operation Mode Development at the Synchrotron Radiation Source Siberia-2”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3305-3307.
- A. J. DeMello et al., “Progress on MICE RFCC Module for the MICE Experiment”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP290, pp. 1370-1372.
- M. Ebbeni, H. Tarawneh, and A. Thiel, “Status of Insertion Device Measurement Systems at MAX IV Laboratory”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4047-4049.
- M. Nishiura, T. Katayama, T. Tanabe, A. O. Sidorin, E. M. Syresin, and I. Watanabe, “Design of the ACR Electron Cooler at RIKEN”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE084, pp. 1377-1379.
- H. Gaus, B. Nguyen, B. Comiskey, E. Loftin, and J. Bradley III, “Review of known extraction kickers”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR39, pp. 3587-3590.
- B. Wiik, “The Status of HERA”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 351-356.
- P. A. Maslov, M. Komel, and K. Zagar, “Device Control Database Tool (DCDB)”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO015, pp. 191-192.
- T. Vinatier, C. Bruni, S. Chanc?®, and P. M. Puzo, “Length Measurement of High-brightness Electron Beam thanks to the 3-Phase Method”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3459-3461.
- J. Sandberg et al., “The Neutrino Horn 300 Kiloampere Pulsed Power Supply at Brookhaven National Laboratory”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1743-1746.
- C. Y. Yoshikawa et al., “An Optimization Study of the Target Subsystem for the New g-2 Experiment”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA21, pp. 345-347.
- H. A. Grunder and F. B. Selph, “Operation of the Berkeley 88 - Inch Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63A02, pp. XX-XX.
- H. Lengeler, “Superconducting Cavities for Neutron Spallation Sources and other High Intensity Proton Accelerators”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93E02, pp. XX-XX.
Back to search